Components GP11MCBE Sealed ultraminiature pushbutton switch Datasheet

GP Series
Sealed Ultraminiature Pushbutton Switches
soldering and washing processes
• Thru-hole and surface mount models
available
Typical Applications
• Telecommunications and
A
network equipment
Pushbutton
Features/Benefits
• Ultraminiature design saves space
• Process compatible, withstands most
• Computers and peripheral products
• Instrumentation
• Medical Applications
• Sealed construction—internal o-ring
and epoxy base
• RoHS compliant
Specifications
Materials
CONTACT RATING: 0.4 VA max. @ 20 V AC or DC max.
HOUSING & BASE: Glass filled nylon 4/6, flame retardant, heat
stabilized (UL 94V-0).
MECHANICAL & ELECTRICAL LIFE: 40,000 make-and-break
cycles at full load.
CONTACT RESISTANCE: Below 50 mΩ typ. initial @
2-4 V DC, 100 mA.
INSULATION RESISTANCE: 109Ω min.
DIELECTRIC STRENGTH: 500 Vrms min. @ sea level.
ACTUATOR: Glass filled nylon 4/6, flame retardant (UL 94V-0)
with standard internal o-ring seal.
SWITCH SUPPORT: Brass, tin plated.
MOVABLE CONTACT: Copper alloy, with gold plate over nickel plate.
STATIONARY CONTACTS Copper alloy, with gold plate over
OPERATING TEMPERATURE: –30ºC to 85ºC.
SOLDERABILITY: Per MIL-STD-202F method 208D, or
EIA RS-186E method 9 (1 hour steam aging).
DEGREE OF PROTECTION: IP57; Protection against harmful dust
deposit, full-scale voltage protection, temporary immersion.
PACKAGING: Surface mount switches standard in anti-static tape
and reel packaging per EIA 481-3, see page A-80 for drawings
and reel information. Thru-Hole parts are shipped in trays.
All models are RoHS compliant and compliant.
nickel plate.
TERMINALS: Copper alloy, with gold flash over nickel plate.
TERMINAL SEAL: Epoxy/Urethane. All terminals insert molded.
NOTE: Any models supplied with B contact material are RoHS compliant and compatible.
NOTE: Materials listed above are general specifications. Specifications available for
specific and custom switches, consult Customer Service Center.
CAUTION: PC mounting layouts and pads as shown are designed to be compatible with the
latest equipment and reflow techniques. Care should be taken in the design and location of
PC lands to suit individual needs. Orientation relative to reflow direction may significantly
impact solder joint integrity.
How To Order
Complete part numbers for GP Series Sealed Ultraminiature Pushbutton Switches are shown on pages A-78 thru A-80.
SWITCH FUNCTION
POS.1
POS. 2
PART NUMBER
GP11MCBE
SCHEMATIC
OFF
MOM.
OPEN
1-3
GP12MCBE
ON
MOM.
Conn. Terms.
2-1
2-3
Conn. Terms.
Terminal nos.
for reference only.
SPST
GP11MCBE
SPST
SPDT
MOM. = Momentary
GP12 Model
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
A-77
www.ck-components.com
GP Series
Sealed Ultraminiature Pushbutton Switches
Pushbutton
A
SWITCH FUNCTION
POS.1
POS. 2
PART NUMBER
GP11MABE
GP11MABE
SPST
OFF
MOM.
OPEN
1-3
GP12MABE
ON
MOM.
Conn. Terms.
2-1
2-3
Conn. Terms.
Terminal nos.
for reference only.
SCHEMATIC
SPST
SPDT
MOM. = Momentary
GP12 Model
SWITCH FUNCTION
POS.1
POS. 2
PART NUMBER
GP11MSABE
SPST
GP11MSABE
SCHEMATIC
OFF
MOM.
OPEN
1-3
GP12MSABE
ON
MOM.
Conn. Terms.
2-1
2-3
Conn. Terms.
SPST
SPDT
MOM. = Momentary
SWITCH FUNCTION
POS.1
GP11MSA1BE
SPST
POS. 2
PART NUMBER
GP11MSA1BE
SCHEMATIC
OFF
MOM.
OPEN
1-3
GP12MSA1BE
ON
MOM.
Conn. Terms.
2-1
2-3
Conn. Terms.
SPST
SPDT
MOM. = Momentary
Third Angle
Projection
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
A-78
www.ck-components.com
GP Series
Sealed Ultraminiature Pushbutton Switches
A
Pushbutton
SWITCH FUNCTION
POS.1
POS. 2
PART NUMBER
SCHEMATIC
GP12MSCBE
ON
MOM.
Conn. Terms.
2-1
2-3
Terminal nos.
for reference only.
SPDT
GP12MSCBE
SPDT
PC MOUNTING
MOM. = Momentary
NOTE: Recommended for infrequent use applications only
For increased switch mounting strength, order, SV1 termination
style with support bracket (see below).
GP11MSV1BE
SPST
SWITCH FUNCTION
POS.1
PART NUMBER
GP11MSV1BE
SCHEMATIC
OFF
MOM.
OPEN
1-3
GP12MSV1BE
ON
MOM.
Conn. Terms.
2-1
2-3
Conn. Terms.
PC MOUNTING
GP11 MODELS
POS. 2
SPST
SPDT
MOM. = Momentary
Third Angle
Projection
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
A-79
www.ck-components.com
GP Series
Sealed Ultraminiature Pushbutton Switches
TAPE & REEL
Pushbutton
A
For part numbers GP11MSV1BE, GP12MSV1BE
.079
(2,00)
FEED DIRECTION
ø0.059
(ø1,50)
.157
(4,00)
.069
(1,76)
.299
(7,60)
REEL INFORMATION
OUTSIDE DIAMETER
PILOT HOLE
.453
(11,51)
13.00 (330,0)
.945
(24,00)
.512 (13,0)
QUANTITY PER REEL
600
GP12MSV1BE
GP11MSV1BE
For part numbers GPXXSA1BE, GPXXMSABE
REEL INFORMATION
OUTSIDE DIAMETER
PILOT HOLE
13.00 (330,0)
.512 (13,0)
QUANTITY PER REEL
600
For part numbers GP12MSCBE
REEL INFORMATION
OUTSIDE DIAMETER
PILOT HOLE
QUANTITY PER REEL
13.00 (330,0)
.512 (13,0)
600
B
Third Angle
Projection
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
A-80
www.ck-components.com
Similar pages