MPS918, MPS3563 MPS918 is a Preferred Device Amplifier Transistors NPN Silicon Features • Pb−Free Packages are Available* http://onsemi.com COLLECTOR 3 MAXIMUM RATINGS Rating Symbol Collector −Emitter Voltage Value VCEO MPS918 MPS3563 Collector −Base Voltage Vdc 1 EMITTER 15 12 VCBO MPS918 MPS3563 Emitter −Base Voltage Vdc 30 30 VEBO MPS918 MPS3563 MARKING DIAGRAM Vdc 3.0 2.0 Collector Current − Continuous IC 50 mAdc Total Device Dissipation @ TA = 25°C Derate above 25°C PD 350 2.8 mW mW/°C Total Device Dissipation @ TC = 25°C Derate above 25°C PD 0.85 6.8 W mW/°C −55 to +150 °C Operating and Storage Junction Temperature Range 2 BASE Unit TJ, Tstg THERMAL CHARACTERISTICS Characteristic Symbol Max Unit Thermal Resistance, Junction−to−Ambient (Note 1) RqJA 357 °C/W Thermal Resistance, Junction−to−Case RqJC 147 °C/W Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1. RqJA is measured with the device soldered into a typical printed circuit board. TO−92 CASE 29−11 STYLE 1 1 2 MPS xxxx AYWW G G 3 MPSxxxx = Device Code xxxx = 918 or 3563 A = Assembly Location Y = Year WW = Work Week G = Pb−Free Package (Note: Microdot may be in either location) ORDERING INFORMATION Device MPS918 Package Shipping † TO−92 5000 Units/Box MPS918G TO−92 (Pb−Free) 5000 Units/Box MPS3563 TO−92 5000 Units/Box TO−92 (Pb−Free) 5000 Units/Box TO−92 2000/Tape & Reel TO−92 (Pb−Free) 2000/Tape & Reel MPS3563G MPS3563RLRA MPS3563RLRAG †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. © Semiconductor Components Industries, LLC, 2006 January, 2006 − Rev. 3 1 Preferred devices are recommended choices for future use and best overall value. Publication Order Number: MPS918/D MPS918, MPS3563 ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Characteristic Symbol Min Max Unit 15 12 − − 30 30 − − 3.0 2.0 − − − − 10 50 20 20 − 200 VCE(sat) − 0.4 Vdc VBE(sat) − 1.0 Vdc 600 600 − 1500 − − − 3.0 1.7 1.7 Cibo − 2.0 pF hfe 20 250 − NF − 6.0 dB 15 14 − − Pout 30 − mW η 25 − % OFF CHARACTERISTICS Collector −Emitter Breakdown Voltage (Note 2) (IC = 3.0 mAdc, IB = 0) V(BR)CEO MPS918 MPS3563 Collector −Base Breakdown Voltage (IC = 1.0 mAdc, IE = 0) (IC = 100 mAdc, IE = 0) Vdc V(BR)CBO MPS918 MPS3563 Emitter −Base Breakdown Voltage (IE = 10 mAdc, IC = 0) Vdc V(BR)EBO MPS918 MPS3563 Collector Cutoff Current (VCB = 15 Vdc, IE = 0) Vdc ICBO MPS918 MPS3563 nAdc ON CHARACTERISTICS DC Current Gain (Note 2) (IC = 3.0 mAdc, VCE = 1.0 Vdc) (IC = 8.0 mAdc, VCE = 10 Vdc) MPS918 MPS3563 hFE Collector −Emitter Saturation Voltage (IC = 10 mAdc, IB = 1.0 mAdc) MPS918 Base −Emitter Saturation Voltage (IC = 10 mAdc, IB = 1.0 mAdc) MPS918 − SMALL− SIGNAL CHARACTERISTICS Current −Gain − Bandwidth Product (Note 2) (IC = 4.0 mAdc, VCE = 10 Vdc, f = 100 MHz) (IC = 8.0 mAdc, VCE = 10 Vdc, f = 100 MHz) MPS918 MPS3563 fT Output Capacitance (VCB = 0 Vdc, IE = 0, f = 1.0 MHz) (VCB = 10 Vdc, IE = 0, f = 1.0 MHz) (VCB = 10 Vdc, IE = 0, f = 1.0 MHz) MPS918 MPS918 MPS3563 Input Capacitance (VEB = 0.5 Vdc, IC = 0, f = 1.0 MHz) MPS918 MHz Cobo Small−Signal Current Gain (IC = 8.0 mAdc, VCE = 10 Vdc, f = 1.0 kHz) pF MPS3563 Noise Figure (IC = 1.0 mAdc, VCE = 6.0 Vdc, RS = 400 kW, f = 60 MHz) MPS918 FUNCTIONAL TEST Common−Emitter Amplifier Power Gain (IC = 6.0 mAdc, VCB = 12 Vdc, f = 200 MHz) (IC = 8.0 mAdc, VCE = 10 Vdc, f = 200 MHz) (Gfd + Gre t −20 dB) MPS918 MPS3563 Power Output (IC = 8.0 mAdc, VCB = 15 Vdc, f = 500 MHz) MPS918 Oscillator Collector Efficiency (IC = 8.0 mAdc, VCB = 15 Vdc, Pout = 30 mW, f = 500 MHz) MPS918 Gpe 2. Pulse Test: Pulse Width v 300 ms; Duty Cycle v 1.0%. http://onsemi.com 2 dB MPS918, MPS3563 PACKAGE DIMENSIONS TO−92 (TO−226) CASE 29−11 ISSUE AL A NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. B R P L SEATING PLANE DIM A B C D G H J K L N P R V K D X X G J H V C SECTION X−X 1 N INCHES MIN MAX 0.175 0.205 0.170 0.210 0.125 0.165 0.016 0.021 0.045 0.055 0.095 0.105 0.015 0.020 0.500 −−− 0.250 −−− 0.080 0.105 −−− 0.100 0.115 −−− 0.135 −−− MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.407 0.533 1.15 1.39 2.42 2.66 0.39 0.50 12.70 −−− 6.35 −−− 2.04 2.66 −−− 2.54 2.93 −−− 3.43 −−− STYLE 1: PIN 1. EMITTER 2. BASE 3. COLLECTOR N ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: N. American Technical Support: 800−282−9855 Toll Free Literature Distribution Center for ON Semiconductor USA/Canada P.O. Box 61312, Phoenix, Arizona 85082−1312 USA Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada Phone: 81−3−5773−3850 Email: [email protected] http://onsemi.com 3 ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. MPS918/D