Fujitsu FTR-B4SB4.5Z Ultra miniature 2-poles 2a (slim profile signal relay) Datasheet

ULTRA MINIATURE
2-POLES 2A (SLIM PROFILE SIGNAL RELAY)
FTR-B4 Series
RoHS compliant
n Features
l
l
l
l
l
l
l
DPDT 2C
Ultra miniature slim type relay for surface mounting
Height:
9.3 mm maximum (THT)
10 mm maximum (SMT)
Weight:
Approximately 1.0 g
Conforms to Bellcore & FCC part 68, and Telcordia &
FCC part 68 Conforms to UL1950 / CSA 950, IEC 950 / EN60950
spacing and high breakdown voltage
Clearance: 1.0mm
Creepage: 1.6mm
Basic insulation, 150V working voltage, pollution degree 2
High reliable birfuracted gold overlay silver contact
Low power consumption 140 mW (standard), 100 mW (latching)
RoHS compliant since date code: 0430B8
Please see page 8 for more information
n ORDERING INFORMATION
[Example]
FTR-B4 C A 4.5
(a) (b) (c) (d)
Z - B 05 (e) (f ) (g)
(a)
Series Name
FTR-B4 Series
(b)
Terminal type
C: Through hole
G: surface mount
S: surface mount type - space saving
(c)
Operation function
A: standard type
B: latching type (1 coil)
(d)
Coil voltage
Nominal voltag
(e)
Contact material
Z: gold overlay silver nickel (standard)
P: gold overlay silver palladium
(f )
Relay enclosing direction*
B: standard enclosing direction
(g)
Number of relays per reel*
05: 500 (standard)
Remarks: Actual marking on relay would not carry code FTR and be as below:
Ordering code
Actual marking
Notes: * FTR-B4CA4.5Z →
B4CA4.5Z
- Only surface mount types (G and S) are applicable
- All relays are packaged in tubes unles P/N ends with -B05
FTR-B4 Series
n PART NUMBERS
Standard type
Ordering Part Number
Series
Terminal Type
Operation
Coil Voltage
FTR-B4CA1.5Z
1.5
FTR-B4CA003Z
3
FTR-B4CA4.5Z
4.5
C: through
hole
FTR-B4CA006Z
FTR-B4CA009Z
6
9
FTR-B4CA012Z
12
FTR-B4CA024Z
24
FTR-B4GA1.5Z
1.5
FTR-B4GA003Z
3
FTR-B4GA4.5Z
4.5
FTR-B4GA006Z
FTR-B4GA009Z
FTR-B4
G: surface
mount
A: mono-stable
(standard type)
6
9
FTR-B4GA012Z
12
FTR-B4GA024Z
24
FTR-B4SA1.5Z
1.5
FTR-B4SA003Z
3
FTR-B4SA4.5Z
FTR-B4SA006Z
FTR-B4SA009Z
S: space saving surface
mount
Contact Material
Z: Au-Ag-Ni
P: Au-Ag-Pd
4.5
6
9
FTR-B4SA012Z
12
FTR-B4SA024Z
24
FTR-B4 Series
Latching type (1 coil)
Ordering Part Number
Series
Terminal Type
Operation
Coil Voltage
FTR-B4CB1.5Z
1.5
FTR-B4CB003Z
3
FTR-B4CB4.5Z
4.5
C: through
hole
FTR-B4CB006Z
FTR-B4CB009Z
6
9
FTR-B4CB012Z
12
FTR-B4CB024Z
24
FTR-B4GB1.5Z
1.5
FTR-B4GB003Z
3
FTR-B4GB4.5Z
4.5
FTR-B4GB006Z
FTR-B4
FTR-B4GB009Z
G: surface
mount
Contact Material
B: latching
6
9
FTR-B4GB012Z
Z: Au-Ag-Ni
P: Au-Ag-Pd
12
FTR-B4GB024Z
24
FTR-B4SB1.5Z
1.5
FTR-B4SB003Z
3
FTR-B4SB4.5Z
4.5
S: space saving surface
mount
FTR-B4SB006Z
FTR-B4SB009Z
6
9
FTR-B4SB012Z
12
FTR-B4SB024Z
24
n COIL DATA CHART
Standard type
Coil
Voltage
Nominal
Voltage (VDC)
Max. Coil
Voltage*1
Coil Resistance Must Operate
( ±10%)
Voltage*2
Must Release
Voltage*2
1.5
1.5
3.53 VDC
16.1 Ω
1.13 VDC
0.15 VDC
003
3
7.05 VDC
64.3 Ω
2.25 VDC
0.3 VDC
4.5
4.5
10.58 VDC
145 Ω
3.38 VDC
0.45 VDC
006
6
14.10 VDC
257 Ω
4.5 VDC
0.6 VDC
009
9
21.15 VDC
579 Ω
6.75 VDC
0.9 VDC
012
12
28.20 VDC
1,028 Ω
9.0 VDC
1.2 VDC
024
24
56.40 VDC
2,504 Ω
18.0 VDC
2.4 VDC
Nominal Power
(mW)
140
230
*1: No contact current at 20°C. Please see ‘operating range’ data for other conditions.
*2: Specified values are subject to pulse wave voltage.
FTR-B4 Series
Latching type (1 coil)
Coil
Voltage
Nominal
Voltage
(VDC)
Max. Coil
Voltage*1
1.5
1.5
3.53 VDC
22.5 Ω
1.13 VDC
-0.13 VDC
50mA
003
3
7.05 VDC
90 Ω
2.25 VDC
-2.25 VDC
25mA
Coil Resistance Must Operate Must Release Set/Re-set
( ±10%)
Voltage*2
Voltage*2
current
4.5
4.5
10.58 VDC
203 Ω
3.38 VDC
-3.38 VDC
17mA
006
6
14.10 VDC
360 Ω
4.5 VDC
-4.5 VDC
13mA
009
9
21.15 VDC
810 Ω
6.75 VDC
-6.75 VDC
8mA
012
12
28.20 VDC
1,440 Ω
9.0 VDC
-9.0 VDC
6mA
024
24
56.40 VDC
4,800 Ω
18.0 VDC
-18.0 VDC
4mA
Nominal
Power
(mW)
100
120
Note: All values in the table are measured at 20˚C.
*1: No contact current at 20°C. Please see ‘operating range’ data for other conditions.
*2: Specified values are subject to pulse wave voltage.
n SPECIFICATIONS
Contact
Coil
Time value
Life
Standard Type
Latching Type
FTR-B4 ( ) A
FTR-B4 ( ) B
Arrangement
2 Form C
Contact material
Gold overlay silver nickel / Gold overlay silver
palladium
Contact type
Bifurcated contact (cross-bar)
Contact resistance (initial value)
100mΩ maximum at 6VDC 1
Contact rating
30 VDC 1A, 125 VAC 0.3 A (resistive)
Maximum carrying current
2A
Maximum switching power
62.5 VA / 30W
Maximum switching voltage
250 VAC/ 220 VDC
Minimum switching load*
10m VDC, 0.01mA*
Nominal power (at 20°C)
140 mW up to 230 mW
100 mW up to 130 mW
Operate power (at 20°C)
80 mW up to 130 mW
57 mW up to 68 mW
Operating temperature (no frost)
-40°C to +85°C
Operate (at nominal voltage, without bounce) 3ms maximum
3ms maximum (set)
Release (at nominal voltage, without bounce) 3ms maximum
3ms maximum (reset)
6
Mechanical
Electrical (resistive
load)
50 x 10 operations
20 x 106 operations
DC load
100 x 103 ops. min. at 1A, 30 VDC (at 0.5 Hz)
AC load
100 x 103 ops. min. at 0.3A, 125VAC (at 0.5 Hz)
Vibration
resistance
Misoperation
10 to 55 Hz at double amplitude of 3 mm
Endurance
10 to 55 Hz at double amplitude of 5 mm
Shock
resistance
Misoperation
Min. 750 m/s2
Endurance
Min. 1,000 m/s2
Weight
Approximately 1.0 g
US/CSA
Contact rating
0.5A, 125 VAC; 1A, 30 VDC; 0.3A, 110 VDC
*1 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with
the actual load before production since reference values may vary according to switching frequencies,
envionmental conditions and expected reliability levels.
FTR-B4 Series
characteristic data
● Standard type
Operation
80
Temperature (ºC)
FTR-B4GA4.5Z
n=10
Time (ms)
4
3
2
Operation time
60
40
1A
20
0A
1
Release
0
0
0.1
0
0.2
0
0.3
0.1
Maximum Switching Power
Contact Current (A)
Standard latch
Operation (x104)
0.5
0.4
DC Resistive
0.3
0.2
0.1
1
5
10
30 50
FTR-B4GB4.5Z
n=10
Distribution (%)
Time (ms)
2
20
0
0.2
0.4
0.8
1.0
1A
2.0
1.6
1.4
1.0
0.8
0.6
0
ltage
ting vo
Opera
il)
(hot co
ltage
ting vo
Opera
il)
o
c
l
(coo
20
40
60
80
0.6
0
80
100
Ambient Temperature (oC)
100
Ambient Temperature (oC)
Coil temperature rise
80
70
set/reset
60
60
40
1A
(?)
0A
1.8
1.2
0.8
ltage
ting vo
Opera
il)
o
c
t
o
(h
ltage
ting vo
Opera
oil)
(cool c
20
40
60
1.2
80
2
Contact Current (A)
Nominal Voltage Multiplying Factor (%)
0.6
FTR-B4GB4.5Z
n=10
1
5
10
Time (ms)
0.3
Ambient Temperature
2.2
1.0
Pulse Characteristics
Coil Power (W)
2.4
1.2
125 VDC Resistive
10
40
0.5
0.2
1.4
30 VDC Resistive
50
1
0.1
1.6
30
90
Operation time
Release
0
1.8
Standard
100
(return time characteristics)
3
0
1A
2.0
0A
Contact Current (A)
● Latching type
Operation
4
2.2
40
Contact Voltage (V)
5
Standard
2.4
50
0
100 200
Ambient Temperature
Life Curve
100
AC Resistive
1
0.3
Coil Power (W)
Coil Power (W)
2
0.2
Temperature (ºC)
5
Nominal Voltage Multiplying Factor (%)
Coil temperature rise
(return time characteristics)
50 100 200
Latch
0
0.1
DC Resistive
0.3
0.2
5
10
30 50
Contact Voltage (V)
100 200
0.2
0.3
Coil Power (W)
Life Curve
100
AC Resistive
0.5
0.4
1
0
0A
Maximum Switching Power
1
0.1
20
Operation (x104)
n
Latch
50
40
30
20
30 VDC Resistive
125 VDC Resistive
10
0
0
0.2
0.4
0.6
0.8
1.0
Contact Current (A)
1.2
FTR-B4 Series
reference data
n
● Standard type
Distribution of Operate
and Release Voltage
60
40
60
40
20
0
10
20
30
40
50
60
70
80
0
Distribution of contact resistance
80
3
150
Isolation (dB)
70
2
Time (ms)
60
50
40
4
50
20
1.8
0
Contact resistance (mΩ)
70
60
50
40
30
FTR-B4GA4.5Z
n=100
Operate
Release
1.0
0.8
0.6
10
20
30
40
50
60
70
50
40
30
20
80
40
30
30 50 70 100
Frequency (MHz)
300 500700 1000
Distribution of Bounce Time
FTR-B4GA4.5Z
n=100
Operate
Release
80
70
60
50
40
30
20
10
0
1
2
3
Time (ms)
4
0
5
150
0
1
2
3
4
5
Time (ms)
High Frequency Characteristics
3.6
FTR-B4GB4.5Z
n=2
FTR-B4GB4.5Z
n=2
3.2
Insertion Loss (dB)
50
3 5 7 10
100
High Frequency Characteristics
100
Isolation (dB)
60
1
90
60
0
FTR-B4GA4.5Z
n=100
Make
Break
Distribution (%)
5
1.2
0
10
Distribution of contact resistance
50
2.8
2.4
2.0
1.6
1.2
0.8
0.4
20
0
1
10
0
4
1.4
300 500 700 1000
Distribution of Bounce Time
Nominal Voltage Multiplying Factor (%)
70
30 50 70 100
Frequency (MHz)
70
10
80
3 5 7 10
80
20
90
1
90
Distribution (%)
Distribution (%)
100
FTR-B4GB4.5Z
n=100
Operate
Release
80
100
3
FTR-B4GA4.5Z
n=2
1.6
Distribution (%)
10 20 30 40 50 60 70 80 90 100
Distribution of Operate
and Release Voltage
0
2
0.2
0
90
0
1
0.4
● Latching type
100
40
High Frequency Characteristics
10
0
60
Time (ms)
FTR-B4GA4.5Z
n=2
100
30
80
0
5
High Frequency Characteristics
FTR-B4GA4.5Z
n=100
Make
Break
90
1
Insertion Loss (dB)
100
FTR-B4GA4.5Z
N=100
Operate
Release
20
20
Nominal Voltage Multiplying Factor (%)
Distribution (%)
FTR-B4GA4.5Z
n=100
Operate
Release
80
Distribution (%)
80
Distribution (%)
100
FTR-B4GA4.5Z
n=100
Operate
Release
Distribution of Bounce Time
100
Distribution (%)
100
Distribution of Operate
and Release Time
0
10 20 30 40 50 60 70 80 90 100
Contact resistance (mΩ)
0
1
10
100
Frequency (MHz)
1000
10
100
Frequency (MHz)
1000
FTR-B4 Series
n DIMENSIONS AND SCHEMATICS
Through hole type
5.7±0.3
5.7±0.3
Surface mount type (standard)
10.6±0.3
3.2±0.2
2.2±0.2 2.2±0.2
3.2
8-O 0.85
(-)
8
7
6
5
1
(+)
2
3
4
1.2
7.6
2.2
(-)
8
7
6
5
2
3
4
3.1
3.2
2.2
7.4±0.3
2.2±0.2 2.2±0.2
3.2±0.2
3.2±0.3
5.3
7.6
3.2
0.4±0.1
3.2±0.2
1.5±0.2
0.2±0.05
0.2±0.05
0.4±0.1
3.1
1.5±0.2
9.7±0.3
9±0.3
0.5
9±0.3
3.54±0.3
0.5±0.1
10.6±0.3
Recommended mounting pad
(Tolerance: ±0.1mm)
Terminal designations
(Top view de-energized
position)
0.8
Recommended mounting pad
(Tolerance: ±0.1mm)
1
(+)
Terminal designations
(Top view de-energized
position)
5.7±0.3
10.6±0.3
FTR-B4 Series
0.2±0.05
5.7±0.3
0.4±0.1
3.2±0.2
1.5±0.2
1.2
0.5
Space saving
9.7±0.3
9±0.3
n DIMENSIONS AND SCHEMATICS
5.7±0.3
2.2±0.2 2.2±0.2
10.6±0.3
3.2
3.2±0.3
7.6
2.2
0.2±0.05
0.4±0.1
3.2±0.2
1.5±0.2
2.2
3.2
±0.2
6
5
2
3
4
2.25
4.45
1
(+)
0.8
3.2±0.3
Recommended mounting pad
(Tolerance: ±0.1mm)
5.7±0.3
2.2±0.2
7
2.25
1.2
0.5
9.7±0.3
9±0.3
(-)
8
Terminal designations
(Top view de-energized
position)
7.6
2.2
(-)
8
7
6
5
2.25
4.45
2.25
n RECOMMENDED SOLDERING CONDITIONS FOR SMT
(TEMPERATURE PROFILE)
IRS (Infrared Reflow Soldering)
Temperature (C)
0.8
soldering
T3
0
preheating
120 sec maximum
2
3
4
T 3 = 250C max.
T 2 = 220C max.
cooling T 1 = 130C max.
T2
T1
Note:
1
(+)
1.Temperature profiles show the tempera
ture of PC board surface.
2. Please perform soldering test with your
actual PC board before mass produc
tion, since the temperatures of PC
board surfaces vary according to the
size of PC board, status of parts mount
ing and heating method.
30 sec
Max.
n PRECAUTIONS
- For details on general precautions, refer to the section on technical descriptions.
- Since this is a polarized relay, follow the instructions of the internal wiring diagram for the +/- connections of
the coil.
- Note that the terminal layout and internal wiring of the surface mount relay are a top view.
- SMT versions of the FTR-B4 relays have moisture sensitivity level 3, acc. JEDEC-J-STD-020D
- SMT versions of the FTR-B4 relays will be shipped in “Dry Pack”. Relays have an “Out of Bag” storage
time of 192h.
FTR-B4 Series
RoHS Compliance and Lead Free Relay Information
1. General Information
If applicable, relays produced after the specific date code that is indicated on each data sheet are lead-free
now. All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info.
(http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf)
l
Lead free solder plating currently used in relays is Sn-3.0Ag-0.5Cu. From February 2005 forward
Sn-3.0Cu-Ni will be used for the FTR-B3 and FTR-B4 series relays.
l
All signal and power relays also comply with RoHS. Please refer to individual data
sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that
are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE, decaBDE and PFOS).
l
It has been verified that using lead-free relays in leaded assembly process will not cause any
problems (compatible).
l
“LF” is marked on each outer and inner carton. (No marking on individual relays).
l
To avoid lead containing relays (for lead-free sample, etc.) please consult with area sales office.
l
We will shiplead containing relays as long as the lead containing relay inventory exists.
Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC)
l
2. Recommended Lead Free Solder Profile
Recommended solder paste Sn-3.0Ag-0.5Cu or Sn-3.0 Cu-Ni (only FTR-B3 and FTR-B4 from
February 2005.
l
Reflow Solder condition
Peak Temp.: max. 250 C
Soldering
Temperature ( C)
250
Flow Solder condition:
Pre-heating:
Soldering:
maximum 120˚C
dip within 5 sec. at
260˚C solder bath
Solder by Soldering Iron:
220
Cooling
Pre-heating
170
Soldering Iron
Temperature: maximum 360˚C
Duration:
maximum 3 sec.
130
90~120 sec.
max. 120 sec.
20~30 sec.
(duration)
We highly recommend that you confirm your actual solder conditions
3. Moisture Sensitivity
l
Moisture Sensitivity Level is not applicable to electromechanical relays.
4. Tin Whisker
l
SnAgCu and SnCuNi solder are known as low risk of tin whisker. No considerable whisker length was found
by our in-house test.
FTR-B4 Series
Fujitsu Components International Headquarter Offices
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: [email protected]
Web: www.fcl.fujitsu.com
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: [email protected]
Web: emea.fujitsu.com/components/
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: [email protected]
Web: http://us.fujitsu.com/relays/
Asia Pacific
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#01-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (65) 6273-3021
Email: [email protected]
Web: http://www.fujitsu.com/sg/services/micro/components/
©2009 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective
owners.
Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our
products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice.
Rev. March 5, 2009.
10
Similar pages