Vishay CMF70 Metal film resistor Datasheet

CMF (Military RN and RL)
Vishay Dale
Metal Film Resistors, Military,
MIL-R-10509 Qualified, Type RN
and MIL-PRF-22684 Qualified, Type RL
FEATURES
• Very low noise (- 40 dB)
• Very low voltage coefficient (5 ppm/V)
• Controlled temperature coefficient
• Flame retardant epoxy coating
• Commercial alternatives to military styles are available
with higher power ratings. See appropriate catalog or web
page
STANDARD ELECTRICAL SPECIFICATIONS
VISHAY DALE® MILITARY APPROVED VALUE RANGE (Ω)
MIL
STYLE
VISHAY
DALE
MODEL
MAXIMUM
WORKING
VOLTAGE
MIL-PRF-22684
DIELECTRIC
STRENGTH
VAC
MIL-R-10509
CHARACTERISTIC D
CHARACTERISTIC C
CHARACTERISTIC E
RN50
CMF50
200
-
10R - 100K
10R - 100K
-
450
RN55
CMF55
200
10R - 301K
49R9 - 100K
49R9 - 100K
-
450
RN60
CMF60
300
10R - 1M
49R9 - 499K
49R9 - 499K
-
500
RN65
CMF65
350
10R - 2M
49R9 - 1M
49R9 - 1M
-
900
RN70
CMF70
500
10R - 2.49M
24R9 - 1M
24R9 - 1M
-
900
RL07
CMF07
250
-
-
-
51R - 150K
450
RL20
CMF20
350
-
-
-
4R3 - 470K
700
Vishay Dale commercial value range: Extended resistance ranges are available in commercial equivalent types. Please contact us by using the
email at the bottom of this page.
TECHNICAL SPECIFICATIONS
PARAMETER
UNIT
CONDITION
Voltage Coefficient
ppm/V
5 when measured between 10 % and full rated voltage
Insulation Resistance
Ω
≥ 1010 minimum dry; ≥ 108 minimum after moisture test
Operating Temperature Range
°C
- 65/+ 175 (see derating curves for military range)
Terminal Strength
Ib
5 pound pull test for RL07/RL20; 2 pound pull test for all others
Solderability
www.vishay.com
44
Continuous satisfactory coverage when tested in accordance
with MIL-R-10509 and MIL-PRF-22684
For technical questions, contact: [email protected]
Document Number: 31027
Revision: 28-Aug-06
CMF (Military RN and RL)
Metal Film Resistors, Military,
MIL-R-10509 Qualified, Type RN
and MIL-PRF-22684 Qualified, Type RL
Vishay Dale
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: RN60D3483FR36 (preferred part numbering format)
R
MIL STYLE
N
6
0
D
3
4
8
3
F
R
RESISTANCE
TOLERANCE
VALUE
CODE
RN50
E = 25 ppm
3 digit significant
B = ± 0.1 %
C = ± 0.25 %
RN55
C = 50 ppm
figure, followed by
D = 100 ppm
D = ± 0.5 %
a multiplier
RN60
RN65
F=±1%
10R0 = 10 Ω
RN70
2152 = 21.5 k Ω
2494 = 2.49 M Ω
Historical Part Number example: RN60D3483F (will continue to be accepted)
3
6
CHARACTERISTIC
SPECIAL
PACKAGING
B14 = Tin/Lead, Bulk
Blank = Standard
R36 = Tin/Lead, T/R (Full)
(Dash Number)
RE6 = Tin/Lead, T/R (1000 pcs)
(up to 1 digit)
F
RN60
D
3483
MIL STYLE
CHARACTERISTIC
RESISTANCE VALUE
R36
TOLERANCE CODE
PACKAGING
New Global Part Numbering: RL07S471JR36 (preferred part numbering format)
R
L
0
MIL STYLE
LEAD MATERIAL
RL07
RL20
S = Solderable
7
S
4
7
1
RESISTANCE
VALUE
2 digit significant
figure, followed by
a multiplier
4R3 = 4.3 Ω
202 = 2.0 k Ω
474 = 470 k Ω
J
R
3
TOLERANCE
CODE
G=±2%
J=±5%
6
PACKAGING
B14 = Tin/Lead, Bulk
R36 = Tin/Lead, T/R (Full)
RE6 = Tin/Lead, T/R (1000 pcs)
Historical Part Number example: RL07S471J (will continue to be accepted)
RL07
S
MIL STYLE
LEAD MATERIAL
J
471
RESISTANCE VALUE
MATERIAL SPECIFICATIONS
Element:
Nickel-chrome alloy
Coating:
Flame retardant epoxy, formulated for
superior moisture protection
Core:
Fire-cleaned high purity ceramic
Termination:
Standard lead material is solder-coated
copper. Solderable and weldable.
R36
TOLERANCE CODE
PACKAGING
ENVIRONMENTAL SPECIFICATIONS
General:
Environmental performance is shown in the
Environmental
Performance
table.
Test
methods are those specified in MIL-R-10509
and MIL-PRF-22684.
Shelf Life:
Resistance shifts due to storage at room
temperature are negligible.
Vishay Dale CMF resistors have an operating temperature range of
- 65 °C to + 175 °C. They must be derated according to the
APPLICABLE MIL-SPECS
MIL-R-10509 and MIL-PRF-22684: The CMF models meet or
exceed the electrical, environmental and dimensional requirements
of MIL-R-10509 and MIL-PRF-22684.
Noise: Vishay Dale metal film resistors have exceptionally low
noise level. Average for standard resistance range is 0.10
micro-volt per volt over a decade of frequency, with low and
intermediate resistance values typically below 0.05 micro-volt per
volt.
% OF RATED POWER
following curves:
120
100
MIL-R-10509
Char. D Rating
80
MIL-R-10509
Char. C & E Rating
60
40
20
MIL-PRF-22684
0
CAGE CODE: 91637
50
70
DERATING
Document Number: 31027
Revision: 28-Aug-06
For technical questions, contact: [email protected]
90
110
130
150
170
AMBIENT TEMPERATURE ° C
www.vishay.com
45
CMF (Military RN and RL)
Metal Film Resistors, Military,
MIL-R-10509 Qualified, Type RN
and MIL-PRF-22684 Qualified, Type RL
Vishay Dale
DIMENSIONS in inches [millimeters]
1.50 ± 0.125
[38.10 ± 3.18]
A
C
Max.
VISHAY DALE
MODEL
B
D
A
B
C (Max.)
D
CMF50
0.150 ± 0.020
[3.81 ± 0.51]
0.065 ± 0.015
[1.65 ± 0.38]
0.244
[6.20]
0.016 ± 0.002
[0.41 ± 0.05]
CMF55
0.240 ± 0.020
[6.10 ± 0.51]
0.090 ± 0.008
[2.29 ± 0.20]
0.278
[7.06]*
0.025 ± 0.002
[0.64 ± 0.05]
CMF60
0.344 ± 0.031
[8.74 ± 0.79]
0.145 ± 0.015
[3.68 ± 0.38]
0.425
[10.80]
0.025 ± 0.002
[0.64 ± 0.05]
CMF65
0.562 ± 0.031
[14.27 ± 0.79]
0.180 ± 0.015
[4.57 ± 0.38]
0.687
[17.45]
0.025 ± 0.002
[0.64 ± 0.05]
CMF70
0.562 ± 0.031
[14.27 ± 0.79]
0.180 ± 0.015
[4.57 ± 0.38]
0.687
[17.45]
0.032 ± 0.002
[0.81 ± 0.05]
CMF07
0.240 ± 0.020
[6.10 ± 0.51]
0.090 ± 0.008
[2.29 ± 0.20]
0.278
[7.06]
0.025 ± 0.002
[0.64 ± 0.05]
CMF20
0.375± 0.040
[9.53 ± 1.02]
0.145 ± 0.015
[3.68 ± 0.38]
0.425
[10.80]
0.032 ± 0.002
[0.81 ± 0.05]
* 0.290" [7.37] for ± 0.25 % and ± 0.1 % resistance tolerances.
MILITARY POWER RATING
MILITARY QUALIFIED
MIL-R-10509
WATTAGE
MIL-PRF-22684
AT + 70 °C
AT + 125 °C
(D)
(C & E)
0.05
RN50
0.10
RN55
0.125
RN55
RN60
0.25
RN60
RN65
0.50
RN65
RN70
1.0
RN70
NOTE: Commercial equivalents of military styles are available with higher power ratings. Consult factory.
RL07
RL20
-
HEAT RISE
100
The increase in resistors surface temperature due to rated load is
shown in the chart above. Resistor temperature = heat rise +
ambient temperature.
80
HEAT RISE (°C)
AT + 70 °C
60
3/4 W
40
1/2 W
1/2 W
1/4 W
20
1/8 W
1/4 W
1/4 W
1/10W
1/8 W
CMF55
CMF07
CMF60
CMF20
0
www.vishay.com
46
CMF65
CMF70
For technical questions, contact: [email protected]
Document Number: 31027
Revision: 28-Aug-06
CMF (Military RN and RL)
Metal Film Resistors, Military,
MIL-R-10509 Qualified, Type RN
and MIL-PRF-22684 Qualified, Type RL
Vishay Dale
MARKING
Characteristics: D = 100 ppm, C = 50 ppm, E = 25 ppm
Tolerance: F = 1 %, D = 0.5 %, C = 0.25 %, B = 0.1 %
Value = three significant figures and multiplier
J = JAN (joint Army - Navy) brand
RN50: (3 lines)
J50D
1211
F137
RN55, RN60, RN65, RN70 (4 lines)
DALE
0137J
RN55D
1211F
J50D JAN, type, characteristic
1211 Value
F137 Tolerance & 3 digit date code
Company Logo
4 digit date code and JAN brand
Type and characteristic
Value and Tolerance
(RL series are color banded per MIL-PRF-22684)
PERFORMANCE
REQUIREMENT
MIL. Temperature Coefficient
Applicable Vishay Dale
Temperature Coefficient
TEST
MIL-R-10509
MIL-PRF-22684
CHARACTERISTIC D
CHARACTERISTIC C
CHARACTERISTIC E
+ 200 - 500 ppm/°C
± 50 ppm/°C
± 25 ppm/°C
± 200 ppm/°C
± 100 ppm/°C
± 50 ppm/°C
± 25 ppm/°C
± 200 ppm/°C
MIL. (Max.)
MIL. (Max.)
MIL. (Max.)
MIL. (Max.)
Thermal Shock
± 0.50 % ΔR
± 0.25 % ΔR
± 0.25 % ΔR
± 1.00 % ΔR
Short Time Overload
± 0.50 % ΔR
± 0.25 % ΔR
± 0.25 % ΔR
± 0.50 % ΔR
Low Temperature Operation
± 0.50 % ΔR
± 0.25 % ΔR
± 0.25 % ΔR
± 0.50 % ΔR
Moisture Resistance
± 1.50 % ΔR
± 0.50 % ΔR
± 0.50 % ΔR
± 1.50 % ΔR
Shock
± 0.50 % ΔR
± 0.25 % ΔR
± 0.25 % ΔR
± 0.50 % ΔR
Vibration
± 0.50 % ΔR
± 0.25 % ΔR
± 0.25 % ΔR
± 0.50 % ΔR
Load Life
± 1.00 % ΔR
± 0.50 % ΔR
± 0.50 % ΔR
± 2.00 % ΔR
Dielectric Withstanding Voltage
± 0.50 % ΔR
± 0.25 % ΔR
± 0.25 % ΔR
± 0.50 % ΔR
Effect of Solder
± 0.50 % ΔR
± 0.10 % ΔR
± 0.10 % ΔR
± 0.50 % ΔR
Document Number: 31027
Revision: 28-Aug-06
For technical questions, contact: [email protected]
www.vishay.com
47
Legal Disclaimer Notice
Vishay
Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.
Document Number: 91000
Revision: 08-Apr-05
www.vishay.com
1
Similar pages