GOOD-ARK HER607 High efficiency rectifier Datasheet

HER601 THRU HER608
HIGH EFFICIENCY RECTIFIER
Reverse Voltage - 50 to 1000 Volts
Forward Current - 6.0 Amperes
Features
Plastic package has Underwriters Laboratory
Flammability classification 94V-0 utilizing
Flame retardant epoxy molding compound
Void-free plastic in R-6 package
6.0 ampere operation at TA=55 with no thermal runaway
Ultra fast swithcing for high efficiency
Mechanical Data
DIM ENSIONS
Case: Molded plastic, R-6
Terminals: Axial leads, solderable per
MIL-STD-202, mehtod 208
Polarity: Band denotes cathode
Mounting Position: Any
Weight: 0.074 ounce, 2.1 grams
inches
DIM
mm
Min.
Max.
Min.
Max.
A
0.339
0.358
8.6
9.1
B
0.339
0.358
8.6
9.1
C
0.047
0.052
1.2
1.3
D
1.000
-
25.40
-
Note
Maximum Ratings and Electrical Characteristics
Ratings at 25
ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
Symbols
HER
601
HER
602
HER
603
HER
604
HER
605
HER
606
HER
607
HER
608
Units
Peak reverse voltage, Repetitive;
VRRM
50
100
200
300
400
600
800
1000
Volts
Maximum RMS voltage
VRMS
35
70
140
210
280
420
560
700
Volts
DC reverse voltage
VDC
50
100
200
300
400
600
800
1000
Volts
Average forward current, IO@TA=55
3/8" lead length, 60Hz, resistive or inductive load
I(AV)
6.0
Amps
Peak forward surge current, IFM (surge)
8.3mS single half sine-wave superimposed
on rated load (MIL-STD-750D 4066 method)
IFSM
300.0
Amps
Maximum forward voltage @6.0A, 25
VF
Maximum reverse current. @rated
reverse voltage
Tj=25
Tj=100
Reverse recovery time
IF=0.5A, IR=1A, IRR=0.25A
Typical junction capacitance (Note 1)
Typical thermal resistance (Note 2)
Operating and storage temperature range
1.00
1.10
Trr
50
CJ
R
1.70
10.0
500.0
IR
JA
TJ, TSTG
1
A
75
nS
300
F
10.0
/W
-55 to +150
Notes:
(1) Measured at 1.0MHz and applied reverse voltage of 4.0 VDC
(2) Thermal resistance from junction to ambient and from junction to lead length 0.375” (9.5mm) P.C.B. mounted
Volts
RATINGS AND CHARACTERISTIC CURVES
2
Similar pages