Vishay D689C20U2JH6.L2R Ceramic disc capacitors class 1, 100 vdc, narrow tolerance Datasheet

D Series Narrow Tolerance
Vishay BCcomponents
Ceramic Disc Capacitors
Class 1, 100 VDC, Narrow Tolerance
FEATURES
D
D
• Low losses
• High stability
• High capacitance in small size
Tangent
line
Tangent
SH line
DR
• Kinked (preferred) or straight leads
• Compliant to RoHS directive 2002/95/EC
APPLICATIONS
• Bypassing
• Coupling
F
F
• Resonant circuit
Capacitors with 5 mm (0.20") and 2.5 mm (0.10") lead spacing
QUICK REFERENCE DATA
DESCRIPTION
CLASS 1 (NP0, N750)
Voltage (VDC)
100
Min. Capacitance (pF)
1.5
Max. Capacitance (pF)
330
Mounting
Through hole
DESIGN
The capacitors consist of a ceramic disc both sides of which
are silver-plated. Connection leads are made of tinned
copper having a diameter of 0.6 mm.
The capacitors have inward kinked leads with a spacing of
5 mm (0.20") and 2.5 mm (0.10") and a lead length from
4 mm to 30 mm. Encapsulation is made of phenolic resin.
CAPACITANCE RANGE
MARKING
Marking indicates capacitance value and tolerance in
accordance with EIA 198.
OPERATING TEMPERATURE RANGE
Class 1, - 55 to + 125 °C
1.5 pF to 330 pF; Class 1, at 1 MHz, 1.2 VRMS;
1 kHz, 1 VRMS ± 0.2 VRMS for capacitance values higher than
1000 pF
RATED DC VOLTAGE
100 V
TEMPERATURE COEFFICIENTS
Class 1, NP0; N750
DIELECTRIC STRENGTH
250 % of rated voltage
SECTIONAL SPECIFICATIONS
Class 1, IEC 60 384-8,
INSULATION RESISTANCE AT 100 VDC
EIA 198
≥ 10 000 MΩ
CLIMATIC CATEGORY
TOLERANCE ON CAPACITANCE
Class 1, 55/125/56
± 0.25 pF; ± 0.5 pF; ± 2 %
DISSIPATION FACTOR
Class 1, C ≤ 30 pF; ≤ 20 x (10/C + 0.7) x 10-4 maximum
Class 1, C > 30 pF; ≤ 0.2 %
Note
• The capacitors meet the essential requirements of EIA 198. Unless stated otherwise all electrical values apply at an ambient temperature of
25 ± 3 °C, at normal atmospheric conditions.
www.vishay.com
34
For technical questions, contact: [email protected]
Document Number: 28512
Revision: 07-Jan-10
D Series Narrow Tolerance
Ceramic Disc Capacitors
Class 1, 100 VDC, Narrow Tolerance
Vishay BCcomponents
ORDERING INFORMATION, CLASS 1, 100 VDC, KINKED AND STRAIGHT
C (PF)
TOL. (%)
DMAX.
(mm)
CLEAR TEXT CODE
LEAD SPACING
F
(mm)
SH/DRMAX. (1)
(mm)
5.0
4.0
D159C20C0KH6.J5R
2.5
1.5
D159C20C0KH6.L2R
5.0
4.0
D189C20C0KH6.J5R
2.5
1.5
D189C20C0KH6.L2R
5.0
4.0
D229C20C0JH6.J5R
2.5
1.5
D229C20C0JH6.L2R
5.0
4.0
D339C20C0JH6.J5R
2.5
1.5
D339C20C0JH6.L2R
13TH DIGIT:
T = REEL; U = AMMO; 3 = BULK
CLASS 1 NP0
1.5
1.8
2.2
± 0.25 pF
3.3
4.7
5.0
6.8
10
15
±2
22
33
47
6.5
68
100
±2
7.5
150
8.5
220
11.0
5.0
4.0
D479C20C0HH6.J5R
2.5
1.5
D479C20C0HH6.L2R
5.0
4.0
D689C20C0HH6.J5R
2.5
1.5
D689C20C0HH6.L2R
5.0
4.0
D100G20C0GH6.J5R
2.5
1.5
D100G20C0GH6.L2R
5.0
4.0
D150G20C0GH6.J5R
2.5
1.5
D150G20C0GH6.L2R
5.0
4.0
D220G20C0GH6.J5R
2.5
1.5
D220G20C0GH6.L2R
5.0
4.0
D330G20C0GH6.J5R
2.5
1.5
D330G20C0GH6.L2R
5.0
4.0
D470G25C0GH6.J5R
2.5
1.5
D470G25C0GH6.L2R
5.0
4.0
D680G25C0GH6.J5R
2.5
1.5
D680G25C0GH6.L2R
5.0
4.0
D101G29C0GH6.J5R
2.5
1.5
D101G29C0GH6.L2R
5.0
4.0
D151G33C0GH6.J5R
2.5
1.5
D151G33C0GH6.L2R
5.0
4.0
D221G43C0GH6.J5R
2.5
1.5
D221G43C0GH6.L2R
5.0
4.0
D689C20U2JH6.J5R
2.5
1.5
D689C20U2JH6.L2R
5.0
4.0
D100G20U2JH6.J5R
2.5
1.5
D100G20U2JH6.L2R
5.0
4.0
D150G20U2JH6.J5R
2.5
1.5
D150G20U2JH6.L2R
5.0
4.0
D220G20U2JH6.J5R
2.5
1.5
D220G20U2JH6.L2R
5.0
4.0
D330G20U2JH6.J5R
2.5
1.5
D330G20U2JH6.L2R
5.0
4.0
D470G20U2JH6.J5R
2.5
1.5
D470G20U2JH6.L2R
5.0
4.0
D680G25U2JH6.J5R
2.5
1.5
D680G25U2JH6.L2R
CLASS 1 N750
6.8
± 0.25 pF
10
15
5.5
22
±2
33
47
68
Document Number: 28512
Revision: 07-Jan-10
6.5
For technical questions, contact: [email protected]
www.vishay.com
35
D Series Narrow Tolerance
Ceramic Disc Capacitors
Class 1, 100 VDC, Narrow Tolerance
Vishay BCcomponents
ORDERING INFORMATION, CLASS 1, 100 VDC, KINKED AND STRAIGHT
C (PF)
DMAX.
(mm)
TOL. (%)
CLEAR TEXT CODE
LEAD SPACING
F
(mm)
SH/DRMAX. (1)
(mm)
5.0
4.0
D101G29U2JH6.J5R
2.5
1.5
D101G29U2JH6.L2R
5.0
4.0
D151G33U2JH6.J5R
2.5
1.5
D151G33U2JH6.L2R
5.0
4.0
D221G39U2JH6.J5R
2.5
1.5
D221G39U2JH6.L2R
5.0
4.0
D331G47U2JH6.J5R
2.5
1.5
D331G47U2JH6.L2R
13TH DIGIT:
T = REEL; U = AMMO; 3 = BULK
CLASS 1 N 750
100
7.5
150
8.5
±2
220
10
330
12
Note
(1) SH = seated height; DR = run down
• 1. Maximum thickness 3.5 mm
• Lead style codes refer to inward kinked leads and straight leads
PACKAGING
DMAX.
(mm)
PACKAGING QUANTITIES
SIZE CODE
5.0 (0.20")
20
6.5 (0.25")
25
7.5 (0.29")
29
8.5 (0.33")
33
10.0 (0.39")
39
11.0 (0.43")
43
12.0 (0.47")
47
BULK
REEL
AMMO
1000
2500
2000
Note
• The capacitors are supplied in bulk packaging (cardboard boxes), in tape on reel or in ammopack
D
P2
Δh
P
ΔP
Δh
ΔP
H1
W2
H0
W1
W0 W
A
e
P1
Direction of unreeling
Ød
F
P0
D0
t1
Kinked capacitors on tape, lead spacing 5.0 mm (0.2")
www.vishay.com
36
For technical questions, contact: [email protected]
detail A
Document Number: 28512
Revision: 07-Jan-10
D Series Narrow Tolerance
Ceramic Disc Capacitors
Class 1, 100 VDC, Narrow Tolerance
Vishay BCcomponents
DIMENSION OF TAPE
DIMENSIONS (mm)
SYMBOL
PARAMETER
D
Body diameter
11.0 maximum
-
d
Lead diameter
0.6
± 0.05
Pitch between capacitors
12.7
± 1.0
Feed-hole pitch
12.7
± 0.3
Plane deviation
1.0 maximum
-
P1 (2)
Feed-hole center to lead center
3.85
± 0.7
P2 (2)
Feed-hole center to component center
6.35
± 1.3
F
Lead spacing
5.0
0.6
- 0.4
Δh
Component alignment
0
± 1.0
W
Tape width
18.0
1.0
- 0.5
W0
Hold-down tape width
5.0 minimum
-
W1
Hole position
9.0
0.75
- 0.5
P
P0
(1)
ΔP
NOMINAL
TOLERANCE
W2
Hold-down tape margin
3.0 maximum
-
H0
Height to seating plane
16.0
± 0.5
H1
Maximum component height
32.0
-
e
Lead end protrusion
1.0 maximum
-
L
Maximum length of snipped lead
11.0
-
D0
Feed-hole diameter
4.0
± 0.2
t
Total tape thickness
0.9 maximum
-
t1
Maximum thickness of tape and wires
1.5 maximum
-
Notes
(1) Cumulative pitch error: ± ≤ 1 mm/20 pitches
(2) Obliquity maximum 3°
REEL AND TAPE DATA in millimeters
51 max.
355.6 ± 2.0
290
28 ± 1.5
8.0
45 max.
335
50
Reel with capacitors on tape
Document Number: 28512
Revision: 07-Jan-10
Ammopack with capacitors on tape
For technical questions, contact: [email protected]
www.vishay.com
37
D Series Narrow Tolerance
Ceramic Disc Capacitors
Class 1, 100 VDC, Narrow Tolerance
Vishay BCcomponents
TEMPERATURE COEFFICIENT IN ACCORDANCE WITH RS198
C = 0.0
0=-1
M = 1.0
1 = - 10
G = ± 30
H = ± 60
P = 1.5
2 = - 100
J = ± 120
R = 2.2
3 = - 1000
K = ± 250
S = 3.3
5=+1
L = ± 500
T = 4.7
6 = + 10
M = ± 1000
U = 7.5
7 = + 100
N = ± 2500
-
8 = + 1000
-
DC16
C
(%)
12
8
N750
4
0
NP0
NP0
-4
N750
-8
- 12
- 16
- 60
- 40
- 20
0
20
40
60
80
100
Capacitance change as a function of temperature
www.vishay.com
38
For technical questions, contact: [email protected]
120
140
T
(°C)
Document Number: 28512
Revision: 07-Jan-10
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
Similar pages