CREE LP6-PPP1-01-N1 Smd led Datasheet

Cree® SMD LED
Model # LP6-PPP1-01-N1
Data Sheet
120-degree, 6.0 x 5.0-mm, SMT LED in full color with water-transparent lens
Applications
•
•
•
•
Indoor and Outdoor Displays
Backlighting
Camera Flash
RGB Full-Color Displays
Absolute Maximum Ratings (TA = 25°C)
Items
Symbol
Absolute Maximum Rating
Unit
R
G
B
IF
80
80
80
mA
IFP
200
100
100
mA
Reverse Voltage
VR
5
5
5
V
Power Dissipation
PD
240
410
410
mW
Operation Temperature
Topr
-40 ~ +100
°C
Storage Temperature
Tstg
-40 ~ +100
°C
Junction Temperature
TJ
+110
110
110
°C
RTHJA
250
210
210
°C/W
RTHJA
500
300
300
°C/W
Junction/solder point 1 chip on
RTHJS
150
130
130
°C/W
Junction/solder point 3 chips on
RTHJS
150
160
160
°C/W
Forward Current
Note 1
Peak Forward Current
Note 2
Junction/ambient 1 chip on
Note 3
Junction/ambient 3 chips on
Note 3
Notes:
1.
2.
3.
Single-color light.
Pulse width ≤0.1 msec, duty ≤1/10.
RTH test condition: mounted on PC Board FR 4 (pad size ≥40 mm2)
D-CT160.000
Data Sheet: CL
Typical Electrical & Optical Characteristics (TA = 25°C)
Values
Characteristics
Condition
Symbol
Wavelength at peak emission
IF = 50 mA
Dominant Wavelength
IF = 50 mA
Spectral bandwidth at 50% IREL max
IF = 50 mA
Δλ
24
38
28
nm
Viewing Angle at 50% IV
IF = 50 mA
2θ½
120
120
120
deg
Forward Voltage
IF = 50 mA
V
Luminous Intensity
Reverse Current (max)
IF = 50 mA
VR = 5 V
Unit
R
G
B
λPEAK
620
521
468
nm
λDOM
610~625
514~534
460~480
nm
VF(avg)
2.0
4.0
4.0
VF(max)
2.5
5.1
5.1
V
IV(min)
710
710
280
mcd
IV(avg)
1000
900
390
mcd
IR
10
10
10
μA
Subject to change without notice.
www.cree.com/ledlamps
Standard Bins for LP6-PPP1-01-N1 (IF = 50 mA)
Lamps are sorted to luminous intensity (IV) and dominant wavelength (λD) bins shown.
Orders for LP6-PPP1-01-N1 may be filled with any or all bins contained as below.
Luminous Intensity (IV)
Luminous Intensity (IV)
Luminous Intensity (IV)
All luminous intensity (IV) and dominant wavelength (λD) values shown and specified are at IF = 50 mA.
X or
above
1800 mcd
W
1120 mcd
V
710 mcd
610 nm
Dominant Wavelength
625 nm
X or
above
1800 mcd
W
1120 mcd
V
710 mcd
514 nm
Dominant Wavelength
534 nm
V or
above
710 mcd
U
450 mcd
T
280 mcd
460 nm
Dominant Wavelength
480 nm
Important Notes:
1. All ranks will be included per delivery; rank ratio will be based on the dice distribution.
2. Tolerance of measurement of luminous intensity is ±10%.
3. Tolerance of measurement of dominant wavelength is ±1 nm.
4. Tolerance of measurement of VF is ±0.05 V.
5. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging Standard” document.
6. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions.
7. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED
product safely.
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
CLD-CT160.000
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Document No. SPE/LP6-PPP1-01-N1
Rev. No.
02
Graphs
Graphs
100.0
If (mA)
80.0
100.0
If (mA)
80.0
GREEN
60.0
60.0
BLUE
40.0
40.0
RED
20.0
20.0
0.0
3.0
Vf(V)
3.4
3.8
4.2
4.6
5.0
0.0
Vf(V)
1.6
1.8
2.0
2.2
4/6
Format #: COTCO-D-074
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
CLD-CT160.000
2.6
FIG.1 FORWARD CURRENT VS.
FORWARD VOLTAGE.
FORWARD CURRENT VS.
FORWARD VOLTAGE.
2.4
REV.4
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Document No. SPE/LP6-PPP1-01-N1
Rev. No.
02
Graphs
Graphs
5/6
Format #: COTCO-D-074
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
CLD-CT160.000
REV.4
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Document No. SPE/LP6-PPP1-01-N1
Rev. No.
02
Graphs
CIE Graph
the color coordinates of the mixed light can be expected within the area of the color triangle marked a).
The color coordinates of the mixed light can be expected within the area of the color triangle marked “a)”.
the
achromatic
pointpoint
(x=0.33,y=0.33)
marked“+”
The
achromatic
(x=0.33, is
y=0.33)
is marked “+”.
Items
Signatures
Date
Prepared by
WangFJ
2007-03-22
Rev.No
Checked by
XieJH
2007-03-22
02
Approved by
DavidLiu
2007-03-22
FCN#
Revision History
Date
Change Description
2007-03-22 Delete WD rank.
FCN20070086
Data is subject to change without prior notice; please refer to COTCO Website for the latest version.
Copyright@2002 Cotco International Ltd.
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
CLD-CT160.000
6/6
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Format #: COTCO-D-074
REV.4
Document No. SPE/LP6-PPP1-01-N1
Rev. No.
02
Dimension Draw ing
Mechanical Dimensions
All dimensions are in mm.
5°C
Absolute maximum
Rating
Unit
R
G
B
0
80
80
mA
00
100
100
mA
5
5
5
V
40
410
410
mW
-40 ~ + 100
°C
-40 ~ + 100
°C
10
110
110
°C
50
210
210
°C/W
00
300
300
°C/W
50
130
130
°C/W
50
160
160
°C/W
3
2
duty<=1/10* Rth test condition: Mounted on PC Board FR 4(pad size>=40mm )
ristics(Ta = 25°C)
Notes
Values
ndition RoHS Symbol
Compliance
50mA
50mA
50mA
R sensitive, persistent
G biologically toxic
B (PBT), persistent organic pollutants (POP), or
The levels of environmentally
otherwise restricted materials in this product are below the maximum concentration values (also referred to as the
threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU DirecOpeak on the restriction
620
521
468
nm
tive 2002/95/EC
of the use of certain hazardous substances in electrical and electronic equipment
(RoHS), as amended through April 21, 2006.
Odom
Vision Advisory Claim
610-625
514-534
460~480
nm
Users should
not to stare at the38
light of this LED product.
The bright
'O be cautioned 24
28
nmlight can damage the eye.
2 T½
50mA
50mA
Unit
V
120
120
120
Deg.
2.0
4.0
4.0
V
CLD-CT160.000
2.5
VF(max)
5.1
5.1
V
Copyright © 2007
Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
F(avg)
Cree logo are registered trademarks of Cree, Inc.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Kit Number System
Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage,
and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED
Lamp Packaging Standard” document for more information about shipping and packaging options.
Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following
manner:
Standard/Custom
0: Standard
C: Custom
VF
0: Full forward voltage distribution
1~9, A~Z . . . : special request *
Wd/Color
1: Full-color distribution
2~9, A~Z . . . : special request *
aaaaaaaaa-aaa-aa- x x x x x
IV
0: Full luminous intensity distribution
1~9, A~Z . . . : special request *
Packing type
0: Standard = tape pack
1~9, A~Z . . . : special request *
Product P/N
* Contact your Cree sales representative for ordering information.
Standard Available Kits*
Kit Number
LP6-PPP1-01-N1-00001
Description
SMD 120 Full Color, FULL RANK, Tape & Reel
* Please contact your Cree representative about the availability of non-standard kits.
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
CLD-CT160.000
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Similar pages