Maxim DG407C/D Improved, 16-channel/dual 8-channel, cmos analog multiplexer Datasheet

19-4729; Rev 3; 6/99
Improved, 16-Channel/Dual 8-Channel,
CMOS Analog Multiplexers
____________________________Features
Maxim’s redesigned DG406 and DG407 CMOS analog
multiplexers now feature guaranteed matching between
channels (8Ω max) and flatness over the specified signal range (9Ω max). These low on-resistance muxes
(100Ω max) conduct equally well in either direction and
feature guaranteed low charge injection (15pC max). In
addition, these new muxes offer low input off-leakage
current over temperature—less than 5nA at +85°C.
The DG406 is a 1 of 16 multiplexer/demultiplexer and
the DG407 is a dual 8-channel multiplexer/demultiplexer. Both muxes operate with a +4.5V to +30V single
supply and with ±4.5V to ±20V dual supplies. ESD protection is guaranteed to be greater than 2000V per
Method 3015.7 of MIL-STD 883. These improved muxes
are pin-compatible plug-in upgrades for the industry
standard DG406 and DG407.
♦ Pin-Compatible Plug-In Upgrade for Industry
Standard DG406/DG407
♦ Guaranteed Matching Between Channels, 8Ω Max
♦ Guaranteed On-Resistance Flatness, 9Ω Max
♦ Guaranteed Low Charge Injection, 15pC Max
♦ Low On-Resistance 100Ω Max
♦ Input Leakage, 5nA Max at +85°C
♦ Low Power Consumption, 1.25mW Max
♦ Rail-to-Rail Signal Handling
♦ Digital Input Controls TTL/CMOS Compatible
♦ ESD Protection >2000V per Method 3015.7
________________________Applications
Sample-and-Hold Circuits
Test Equipment
Guidance and Control Systems
Communications Systems
Data-Acquisition Systems
______________Ordering Information
PART
TEMP. RANGE
PIN-PACKAGE
DG406CJ
0°C to +70°C
0°C to +70°C
0°C to +70°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-55°C to +125°C
28 Plastic DIP
28 Wide SO
Dice*
28 Plastic DIP
28 Wide SO
28 PLCC
28 CERDIP
DG406CWI
DG406C/D
DG406DJ
DG406DWI
DG406DN
DG406AK
Ordering Information continued at end of data sheet.
* Contact factory for dice specifications.
Audio Signal Routing
_________________Pin Configurations
_______________Functional Diagrams
TOP VIEW
V+
V+ 1
28 D
N.C. 2
27 V-
N.C. 3
26 S8
S16 4
25 S7
S15 5
S14 6
24 S6
DG406
23 S5
S13 7
22 S4
S12 8
21 S3
S11 9
20 S2
S10 10
19 S1
S9 11
18 EN
GND 12
17 A0
N.C. 13
16 A1
A3 14
15 A2
V-
GND
S1
S2
S3
S4
S5
S6
S7
S8
S9
S10
S11
S12
S13
S14
S15
S16
D
CMOS DECODERS/DRIVERS
A0
A1
A2
A3
EN
DG406 16-CHANNEL SINGLE-ENDED MULTIPLEXER
DG407 at end of data sheet. DIP/SO
DG407 at end of data sheet.
________________________________________________________________ Maxim Integrated Products
1
For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800.
For small orders, phone 1-800-835-8769.
DG406/DG407
_______________General Description
DG406/DG407
Improved, 16-Channel/Dual 8-Channel,
CMOS Analog Multiplexers
ABSOLUTE MAXIMUM RATINGS
Voltage Referenced to VV+ ............................................................................-0.3V, 44V
GND .........................................................................-0.3V, 25V
Digital Inputs, S, D (Note 1)....................(V- - 2V) to (V+ + 2V) or
30mA (whichever occurs first)
Continuous Current (any terminal) ......................................30mA
Peak Current, S or D
(pulsed at 1ms, 10% duty cycle max) ..........................100mA
Continuous Power Dissipation (TA = +70°C)
Plastic DIP (derate 9.09mW/°C above +70°C) ............727mW
Wide SO (derate 12.50mW/°C above +70°C)............1000mW
PLCC (derate 10.53mW/°C above +70°C) ..................842mW
CERDIP (derate 16.67mW/°C above +70°C) .............1333mW
Operating Temperature Ranges
DG406/DG407C_ ...............................................0°C to +70°C
DG406/DG407D_ ............................................-40°C to +85°C
DG406/DG407AK ..........................................-55°C to +125°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10sec) .............................+300°C
Signals on S_, D_, A0, A1, A2, A3, or EN exceeding V+ or V- are clamped by internal diodes. Limit forward current to maximum current ratings.
Note 1:
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS—Dual Supplies
(V+ = 15V, V- = -15V, GND = 0V, VAH = +2.4V, VAL = +0.8V, TA = TMIN to TMAX, unless otherwise noted.)
PARAMETER
SYMBOL
MIN
CONDITIONS
TYP
MAX
(Note 2)
UNITS
SWITCH
Analog Signal Range
Drain-Source On-Resistance
VANALOG
rDS(ON)
On-Resistance Matching
Between Channels
∆rDS(ON)
On-Resistance Flatness
rFLAT
Source-Off Leakage Current
(Note 5)
Drain-Off Leakage Current
(Note 5)
IS(OFF)
(Note 3)
-15
IS = -1.0mA,
VD = ±10V
TA = +25°C
IS = -1.0mA,
VD = ±10V (Note 4)
TA = +25°C
IS = -1.0mA,
VD = ±5V or 0V
TA = +25°C
VD = +10V,
VS = ±10V,
VEN = 0V
TA = +25°C
VD = ±10V,
VS = +10V,
VEN = 0V
TA = +25°C
TA = TMIN to TMAX
1.5
TA = TMIN to TMAX
TA = TMIN
to TMAX
DG406
TA = TMIN
to TMAX
TA = TMIN
to TMAX
Drain-On Leakage Current
(Note 5)
2
ID(ON)
+
IS(ON)
DG406
TA = TMIN
to TMAX
TA = TMIN
to TMAX
0.01
-5
5
A
-50
50
-1
0.02
-40
40
A
-200
200
C, D
-20
A
-100
-1
C, D
-40
A
-200
-1
0.02
Ω
Ω
Ω
nA
1
C, D
-1
V
0.5
C, D
TA = +25°C
DG407
9
12
-0.5
TA = +25°C
VD = ±10V,
VS = ±10V,
sequence
each switch
on
8
10
1.8
TA = +25°C
DG407
100
125
TA = TMIN to TMAX
ID(OFF)
VD = +10V,
VS = ±10V,
VEN = 0V
15
60
1
nA
20
100
0.02
1
40
200
0.02
1
C, D
-20
20
A
-100
100
_______________________________________________________________________________________
nA
Improved, 16-Channel/Dual 8-Channel,
CMOS Analog Multiplexers
(V+ = 15V, V- = -15V, GND = 0V, VAH = +2.4V, VAL = +0.8V, TA = TMIN to TMAX, unless otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
(Note 2)
UNITS
INPUT
Input Current with
Input Voltage High
IAH
VA = 2.4V or 15V
-1.0
1.0
µA
Input Current with
Input Voltage Low
IAL
VEN = 0V or 2.4V,
VA = 0V
-1.0
1.0
µA
±20
30
75
0.5
1
1
10
V
SUPPLY
Power-Supply Range
±4.5
VEN = VA = 0V or 4.5V
Positive Supply Current
Negative Supply Current
I+
I-
VEN = 2.4V,
VA(ALL) = 0V or 2.4V
VEN = 2.4V,
VA(ALL) = 0V or 2.4V
TA = +25°C
TA = TMIN to TMAX
TA = +25°C
TA = TMIN to TMAX
TA = +25°C
TA = TMIN to TMAX
16
0.075
-1
-10
µA
mA
µA
DYNAMIC
Transition Time
tTRANS
Figure 2
Break-Before-Make Interval
tOPEN
Figure 4
Enable Turn-On Time
tON(EN)
Figure 3
Enable Turn-Off Time
tOFF(EN)
Figure 3
TA = +25°C
TA = TMIN to TMAX
TA = +25°C
TA = +25°C
TA = TMIN to TMAX
TA = +25°C
TA = TMIN to TMAX
110
10
40
130
55
300
400
ns
ns
200
400
150
300
ns
ns
CL = 1.0nF,
VS = 0V,
RS = 0Ω, Figure 5
TA = +25°C
2
VISO
VEN = 0V,
RL = 1kΩ,
f = 100kHz, Figure 6
TA = +25°C
-69
dB
Crosstalk Between Channels
VCT
VEN = 2.4V,
f = 100kHz,
VGEN = 1VP-P,
RL = 1kΩ, Figure 7
TA = +25°C
-92
dB
Logic Input Capacitance
CIN
f = 1MHz
TA = +25°C
8
pF
f = 1MHz,
VEN = VS = 0V,
Figure 8
TA = +25°C
8
pF
Charge Injection
(Note 3)
Q
Off Isolation
(Note 6)
Source-Off Capacitance
Drain-Off Capacitance
Drain-Source On
Capacitance
CS(OFF)
CD(OFF)
CD(ON)
+
CS(ON)
f = 1MHz,
VEN = 0.8V,
VD = 0V,
Figure 8
f = 1MHz,
VEN = 2.4V,
VD = 0V,
Figure 8
DG406
pC
130
TA = +25°C
DG407
pF
65
DG406
140
TA = +25°C
DG407
15
pF
70
_______________________________________________________________________________________
3
DG406/DG407
ELECTRICAL CHARACTERISTICS—Dual Supplies (continued)
DG406/DG407
Improved, 16-Channel/Dual 8-Channel,
CMOS Analog Multiplexers
ELECTRICAL CHARACTERISTICS—Single Supply
(V+ = 12V, V- = 0V, GND = 0V, VAH = +2.4V, VAL = +0.8V, TA = TMIN to TMAX, unless otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
(Note 2)
UNITS
SWITCH
Analog Signal Range
VANALOG
(Note 3)
0
12
V
120
175
Ω
TA = +25°C
130
450
ns
VAL = 0V,
VS1 = 5V,
Figure 3
TA = +25°C
105
600
ns
VAL = 0V,
VS1 = 5V,
Figure 3
TA = +25°C
80
300
ns
CL = 1.0nF,
VS1 = 0V,
RS = 0Ω
TA = +25°C
2
10
pC
rDS(ON)
Is = -1.0mA
VD = 3V or 10V
TA = +25°C
Transition Time
(Note 3)
tTRANS
VS1 = 8V,
VS16 = 0V,
VA = 0V,
Figure 2
Enable Turn-On Time
(Note 3)
tON(EN)
Enable Turn-Off Time
(Note 3)
tOFF(EN)
Drain-Source On-Resistance
DYNAMIC
Charge Injection
(Note 3)
Q
Note 2: The algebraic convention where the most negative value is a minimum and the most positive value a maximum is used in
this data sheet.
Note 3: Guaranteed by design.
Note 4: ∆RON = RON(MAX) - RON(MIN). On-resistance match between channels and flatness are guaranteed only with specified
voltages. Flatness is defined as the difference between the maximum and minimum value of on-resistance as measured at
the extremes of the specified analog signal range.
Note 5: Leakage parameters are 100% tested at the maximum rated hot temperature and guaranteed by correlation at +25°C.
Note 6: Off isolation = 20log VD/VS, where VD = output and VS = input to off switch.
4
_______________________________________________________________________________________
Improved, 16-Channel/Dual 8-Channel,
CMOS Analog Multiplexers
ON-RESISTANCE vs. VD AND
TEMPERATURE (DUAL SUPPLIES)
140
±5V
V+ = 15V
V- = -15V
400
100
360
320
80
±15V
60
+85°C
60
+25°C
-55°C
40
±20V
280
rDS (ON) (Ω)
±10V
100
+125°C
80
rDS (ON) (Ω)
5V
240
200
160
40
10V
120
20
20
0
-20
0
-15 -10
-5
0
5
10
15
-10
-5
VD (V)
0
5
10
15
0
5
10
VD (V)
ON-RESISTANCE vs. VD AND
TEMPERATURE (SINGLE SUPPLY)
V+ = 15V
V- = -15V
100
20
ON LEAKAGE vs. TEMPERATURE
OFF LEAKAGE vs. TEMPERATURE
1000
DG406/7 TOC-05
V+ = 15V
V- = 0V
15
VD (V)
1000
DG406/7 TOC-04
160
140
20V
40
-15
20
15V
80
DG406/7 TOC-06
rDS (ON) (Ω)
120
V+ = 15V
V- = -15V
100
+85°C
100
+25°C
80
-55°C
60
10
1
ICOM (ON)
0.1
0
ICOM (ON)
10
15
0.0001
-55 -35 -15
5
25 45
CHARGE INJECTION vs. VD
20
I+
10
I+, I- (µA)
V+ = 15V
V- = -15V
10
0
V+ = 12V
V- = 0V
-10
65
85 105 125
SUPPLY CURRENT vs. TEMPERATURE
100
DG406/7 TOC-07
30
25 45
5
TEMPERATURE (°C)
TEMPERATURE (°C)
VD (V)
Qj (pC)
-55 -35 -15
85 105 125
65
DG406/7 TOC-08
5
0.1
0.001
0.0001
0
1
INO (OFF)
0.001
20
10
0.01
0.01
40
ON LEAKAGE (nA)
OFF LEAKAGE (nA)
+125°C
120
rDS (ON) (Ω)
DG406/7 TOC-03
120
DG406/7 TOC-01
160
ON-RESISTANCE vs. VD
(SINGLE SUPPLY)
DG406/7 TOC-02
ON-RESISTANCE vs. VD
(DUAL SUPPLIES)
1
0.1
I0.01
-20
-30
V+ = +15V
V- = -15V
VEN = VA = 0V, 4.5V
0.001
-15
-10
-5
0
VD (V)
5
10
15
-55 -35 -15
5
25 45
65
85 105 125
TEMPERATURE (°C)
_______________________________________________________________________________________
5
DG406/DG407
__________________________________________Typical Operating Characteristics
(TA = +25°C, unless otherwise noted.)
DG406/DG407
Improved, 16-Channel/Dual 8-Channel,
CMOS Analog Multiplexers
_____________________________________________________________Pin Descriptions
DG406
PIN
NAME
DG407
PIN
NAME
1
V+
Positive Supply Voltage Input
1
V+
Positive Supply Voltage Input
2, 3, 13
N.C.
No Internal Connections
2
DB
Bidirectional Output B
4–11
S16–S9
3, 13, 14
N.C.
No Internal Connection
12
GND
4–11
S8B–S1B
14–17
A3–A0
12
GND
18
EN
15, 16, 17
A2, A1, A0
19–26
S1–S8
18
EN
27
V-
Negative Supply Voltage Input
19–26
S1A–S8A
28
D
Bidirectional Output
27
V-
Negative Supply Voltage Input
28
DA
Bidirectional Output A
FUNCTION
Bidirectional Analog Inputs
Ground
Address Inputs
Enable Inputs
Bidirectional Analog Inputs
__________Applications Information
Operation with Supply Voltages
Other than ±15V
FUNCTION
Bidirectional Analog Inputs
Ground
Address Inputs
Enable Input
Bidirectional Analog Inputs
signal range to 1V above V+ and 1V below V-, but low
switch resistance and low leakage characteristics are
unaffected. Device operation is unchanged, and the
difference between V+ and V- should not exceed +44V.
Using supply voltages other than ±15V reduces the
analog signal range. The DG406/DG407 switches operate with ±4.5V to ±20V bipolar supplies or with a +4.5V
to +30V single supply; connect V- to GND when operating with a single supply. Also, both device types can
operate with unbalanced supplies such as +24V and
-5V. The Typical Operating Characteristics graphs
show typical on-resistance with 20V, 15V, 10V, and 5V
supplies. (Switching times increase by a factor of two
or more for operation at 5V.)
V+
S
D
Overvoltage Protection
Proper power-supply sequencing is recommended for
all CMOS devices. Do not exceed the absolute maximum ratings because stresses beyond the listed ratings may cause permanent damage to the devices.
Always sequence V+ on first, then V-, followed by the
logic inputs and analog signals. If power-supply
sequencing is not possible, add two small signal
diodes in series with supply pins for overvoltage protection (Figure 1). Adding diodes reduces the analog
6
Vg
V-
Figure 1. Overvoltage Protection Using External Blocking
Diodes
_______________________________________________________________________________________
Improved, 16-Channel/Dual 8-Channel,
CMOS Analog Multiplexers
+15V
V+
S1
A0
A1
±10V
S2-S15
A2
DG406
A3
S16
EN
+10V
D
GND
VOUT
V-
LOGIC
INPUT
50%
35pF
50Ω
0V
300Ω
+15V
-15V
VS1
SWITCH
OUTPUT
VOUT
V+
S1B
A0
A1
±10V
+10V
tTRANS
DB
GND
tTRANS
ON
VOUT
V-
50Ω
0V
VS16
S8B
EN
90%
90%
DG407 S1A-S8A
A2
tR < 20ns
tF < 20ns
+3V
35pF
300Ω
-15V
Figure 2. Transition Time
+15V
V+
EN
S1
A0
-5V
S2-S16
A1
DG406
A2
A3
D
GND
50Ω
VOUT
V-
35pF
1kΩ
LOGIC
INPUT
-15V
S1B
-5V
90%
VOUT
DG407
A2
50Ω
10%
SWITCH
OUTPUT
S1A-S16A
S2B-S16B,
DA
A1
tOFF(EN)
0V
V+
A0
50%
0V
tON(EN)
+15V
EN
tR < 20ns
tF < 20ns
+3V
DB
GND
VOUT
V1kΩ
35pF
-15V
Figure 3. Enable Switching Time
_______________________________________________________________________________________
7
DG406/DG407
______________________________________________Test Circuits/Timing Diagrams
DG406/DG407
Improved, 16-Channel/Dual 8-Channel,
CMOS Analog Multiplexers
_________________________________Test Circuits/Timing Diagrams (continued)
+15V
+2.4V
V+
EN
A0
S1-S16
+5V
tR < 20ns
tF < 20ns
+3V
LOGIC
INPUT
50%
0V
A1
A2
VOUT
DG406
80%
A3
D
GND
SWITCH
OUTPUT
VOUT
V-
35pF
tOPEN
0V
300Ω
50Ω
-15V
Figure 4. Break-Before-Make Interval
+15V
RS
S1-S16
V+
LOGIC
INPUT
EN
VS
CHANNEL
SELECT
+3V
OFF
ON
OFF
0V
A0
D
A1
VOUT
DG406
A2
A3
CL = 1000nF
GND
V-
∆VOUT
VOUT
∆VOUT IS THE MEASURED VOLTAGE DUE TO CHARGE TRANSFER
ERROR Q WHEN THE CHANNEL TURNS OFF.
-15V
Q = CL = ∆VOUT
Figure 5. Charge Injection
8
_______________________________________________________________________________________
Improved, 16-Channel/Dual 8-Channel,
CMOS Analog Multiplexers
+15V
10nF
+15V
VOUT
VIN
S1
RS = 50Ω
V+
RL =
1kΩ
S16
10nF
V+
S1
S2
S16
A0
D
DG406
A1
VOUT
RS = 50Ω
RL = 1kΩ
A2
A0
DG406
COM
EN
V-
A1
A2
A3
GND
EN
A3
GND
V-
10nF
-15V
OFF ISOLATION = 20log
10nF
VOUT
VIN
CROSSTALK = 20log
Figure 6. Off Isolation
-15V
VOUT
VIN
Figure 7. Crosstalk
+15V
V+
A3
CHANNEL
SELECT
S1
Meter
A2
DG406
A1
S16
A0
Impedance
Analyzer
D
GND
EN
V-
f = 1MHz
-15V
Figure 8. Source/Drain Capacitance
_______________________________________________________________________________________
9
DG406/DG407
_________________________________Test Circuits/Timing Diagrams (continued)
________Pin Configurations/Functional Diagrams/Truth Tables (continued)
TOP VIEW
V+ 1
28 DA
DB 2
27 V-
N.C. 3
26 S8A
S8B 4
25 S7A
S7B 5
24 S6A
DG407
S6B 6
23 S5A
S5B 7
22 S4A
S4B 8
21 S3A
S3B 9
20 S2A
S2B 10
19 S1A
S1B 11
18 EN
GND 12
17 A0
N.C. 13
16 A1
N.C. 14
15 A2
A3
A2
A1
A0
EN
ON
Switch
X
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
X
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
X
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
X
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
None
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
DG406
LOGIC “0” VAL ≤ 0.8V, LOGIC “1” = VAH ≥ 2.4V
DB
V+
DA
3
2
1
28 27 26
S8A
N.C.
4
V-
S8B
DIP/SO
S7B
5
25
S7A
S6B
6
24
S6A
S5B
7
23
S5A
S4B
8
22
S4A
DG407
S3B
9
21
S3A
S2B
10
20
S2A
S1B
11
19
S1A
A2
A1
A0
EN
ON
Switch
X
0
0
0
0
1
1
1
1
X
0
0
1
1
0
0
1
1
X
0
1
0
1
0
1
0
1
0
1
1
1
1
1
1
1
1
None
1
2
3
4
5
6
7
8
EN
PLCC
A0
A2
N.C.
18
N.C.
16 17
A1
DG407
12 13 14 15
GND
DG406/DG407
Improved, 16-Channel/Dual 8-Channel,
CMOS Analog Multiplexers
LOGIC “0” VAL ≤ 0.8V, LOGIC “1” = VAH ≥ 2.4V
N.C. = NO INTERNAL CONNECTION
10
______________________________________________________________________________________
Improved, 16-Channel/Dual 8-Channel,
CMOS Analog Multiplexers
V+
V-
_Ordering Information (continued)
PART
GND
DG407CJ
S1A
S2A
S3A
S4A
S5A
S6A
S7A
S8A
S1B
S2B
S3B
S4B
S5B
S6B
S7B
S8B
DA
DG407CWI
DG407C/D
DG407DJ
DG407DWI
DG407DN
DG407AK
TEMP. RANGE
0°C to +70°C
0°C to +70°C
0°C to +70°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-55°C to +125°C
PIN-PACKAGE
28 Plastic DIP
28 Wide SO
Dice*
28 Plastic DIP
28 Wide SO
28 PLCC
28 CERDIP
* Contact factory for dice specifications.
DB
CMOS DECODERS/DRIVERS
A0
A1
A2
EN
DG407 8-CHANNEL DIFFERENTIAL MULTIPLEXER
______________________________________________________________________________________
11
DG406/DG407
__Functional Diagrams (continued)
DG406/DG407
Improved, 16-Channel/Dual 8-Channel,
CMOS Analog Multiplexers
__________________________________________________________Chip Topographies
DG406
EN
A0
A1
A2
DG407
A3
N.C.
EN
A0
A1
A2
N.C. N.C.
0.184"
(4.67mm)
0.184"
(4.67mm)
GND
GND
S1
S9
S1A
S1B
S2
S10
S2A
S2B
S3
S11
S3A
S3B
S4
S12
S4A
S4B
S5
S13
S5A
S5B
S6
S14
S6A
S6B
S7
S15
S7A
S7B
S8
S16
S8A
S8B
N.C.
V-
D
V+
DB
V-
0.078"
(1.98mm)
DA
V+
0.078"
(1.98mm)
N.C. = NO INTERNAL CONNECTION
TRANSISTOR COUNT: 269
TRANSISTOR COUNT: 269
SUBSTRATE IS INTERNALLY CONNECTED TO V+
SUBSTRATE IS INTERNALLY CONNECTED TO V+
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
12 ____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 1999 Maxim Integrated Products
Printed USA
is a registered trademark of Maxim Integrated Products.
Similar pages