CLARE CPC1117N 4-pin sop optomosâ® relay Datasheet

CPC1117N
4-Pin SOP OptoMOS® Relay
Parameter
Blocking Voltage
Load Current
Max On-Resistance
LED Current to Operate
Rating
60
150
16
1
Description
Units
VP
mA
Ω
mA
Features
• Designed for use in security systems complying
with EN50130-4
• Only 1mA of LED current required to operate
• Small 4-Pin SOP Package
• TTL/CMOS Compatible input
• No Moving Parts
• High Reliability
• Arc-Free With No Snubbing Circuits
• 1500Vrms Input/Output Isolation
• No EMI/RFI Generation
• Immune to radiated EM fields
• SMD Pick & Place, Wave Solderable
• Tape & Reel Version Available
The CPC1117N is a miniature 1-Form-B solid state
relay in a 4-Pin SOP package that employs optically
coupled MOSFET technology to provide 1500Vrms of
input/output isolation. The efficient MOSFET switches
and photovoltaic die use Clare’s patented OptoMOS
architecture. The optically coupled output is controlled
by the input's highly efficient GaAlAs infrared LED
using Clare’s state of the art double-molded vertical
construction packaging to produce one of the world’s
smallest relays. The CPC1117N offers board space
savings of at least 20% over the competitor’s larger
4-Pin SOP relay.
Approvals
• UL Recognized Component: File # E76270
• EN/IEC 60950-1 Compliant
• CSA Certified Component: Certificate # 1172007
Ordering Information
Applications
• Security
• Passive Infrared Detectors (PIR)
• Data Signalling
• Sensor Circuitry
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• Medical Equipment—Patient/Equipment Isolation
• Aerospace
• Industrial Controls
Part #
CPC1117N
CPC1117NTR
Description
4-Pin SOP (100/tube)
4-Pin SOP (2000/reel)
Pin Configuration
+ Control
– Control
1
4
2
3
Load
Load
Switching Characteristics of
Normally Closed (Form B) Devices
CONTROL
+
ILOAD
tOFF
Pb
RoHS
2002/95/EC
DS-CPC1117N-R03
90%
+10%
tON
e3
www.clare.com
1
CPC1117N
Absolute Maximum Ratings
Parameter
Blocking Voltage
Reverse Input Voltage
Input Control Current
Peak (10ms)
Input Power Disipation
Total Power Dissipation 1
Isolation Voltage, Input to Output
Operational Temperature
Storage Temperature
1
Ratings
60
5
50
1
70
400
1500
-40 to +85
-40 to +125
Units
VP
V
mA
A
mW
mW
Vrms
°C
°C
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
Derate Linearly 3.33 mw / ºC
Electrical absolute maximum ratings are at 25°C
Electrical Characteristics
Parameter
Output Characteristics @ 25°C
Load Current
Continuous 1
Peak
On-Resistance 2
Off-State Leakage Current
Switching Speeds
Turn-On
Turn-Off
Output Capacitance
Input Characteristics @ 25°C
Input Control Current 3
Input Dropout Current
Input Voltage Drop
Reverse Input Current
Common Characteristics @ 25°C
Capacitance Input to Output
1
2
3
2
Conditions
Symbol
Min
Typ
Max
IF=0mA
t=10ms
IL=120mA
VL=60V, IF=2mA
IL
ILPK
RON
ILEAK
-
5
-
150
350
16
1
50V; f=1MHz
tON
tOFF
COUT
-
25
1
2
-
IL=120mA
IF=5mA
VR=5V
IF
IF
VF
IR
0.3
0.9
-
0.65
0.5
1.2
-
1
1.4
10
mA
mA
V
µA
-
-
-
1
-
pF
IF=2mA, VL=10V
Units
mA
Ω
µA
ms
pF
Load current derates linearly from 150mA @ 25oC to 100mA @85oC.
Measurement taken within 1 second of on time.
For applications requiring high temperature operation (greater than 60oC) an LED drive current of 3mA is recommended.
www.clare.com
R03
CPC1117N
PERFORMANCE DATA*
35
20
15
10
5
10
20
15
10
5
0
5.0
5.1
5.2
5.3
5.4
5.5
85
5.6
CPC1117N
Typical IF for Switch Dropout
(N=50, TA=25ºC, IL=150mA)
25
Device Count (N)
15
10
5
20
15
10
5
0.45 0.50 0.55 0.60
LED Current (mA)
CPC1117N
Typical Turn-Off Time
(N=50, TA=25ºC, IL=150mA, IF=2mA)
Load Current (mArms)
225
20
15
10
5
0.40
0.45 0.50 0.55 0.60
LED Current (mA)
0.30
0.32
0.34 0.36 0.38
Turn-Off (ms)
0.40
CPC1117N
Typical Blocking Voltage vs. Temperature
(IF=2mA)
125
120
Turn-On (ms)
115
110
105
100
95
90
-40
-20
0
20
40
60
Temperature (ºC)
80
100
15
10
5
0.28
CPC1117N
Typical Load Current vs. Temperature
(IF=0mA)
0.35
175
0.30
150
125
100
75
0.30
0.32 0.34 0.36
Turn-On (ms)
0.38
0.40
CPC1117N
Typical Leakage vs. Temperature
Measured Across Pins 3 & 4
(IL=150mA, IF=2mA)
0.40
200
0.25
0.20
0.15
50
0.10
25
0.05
0
-40
0.42
20
0.65
0
0
115
0
0.35
0.65
Leakage (µA)
0.40
95
100 105 110
Blocking Voltage (VP)
CPC1117N
Typical Turn-On Time
(N=50, TA=25ºC, IL=150mA, IF=2mA)
25
0
0
0.35
90
On-Resistance (Ω)
20
Device Count (N)
15
25
0
1.19
1.21
1.23
1.25
LED Forward Voltage Drop (V)
CPC1117N
Typical IF for Switch Operation
(N=50, TA=25ºC, IL=150mA)
25
Device Count (N)
20
Device Count (N)
1.17
Blocking Voltage (VP)
25
5
0
CPC1117N
Typical Blocking Voltage Distribution
(N=50, TA=25ºC, IF=1mA)
30
Device Count (N)
25
25
35
30
Device Count (N)
Device Count (N)
30
CPC1117N
Typical On-Resistance Distribution
(N=50, TA=25ºC, IL=150mA)
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
-40
-20
0
20
40
60
80
100
120
-40
-20
0
20
40
60
80
Temperature (ºC)
Temperature (ºC)
CPC1117N
Typical Turn-On vs. Temperature
(IL=50mA)
CPC1117N
Typical Turn-Off vs. Temperature
(IL=50mA)
I F =2mA
-20
0
20
40
60
Temperature (ºC)
80
100
Turn-Off (ms)
35
CPC1117N
Typical LED Forward Voltage Drop
(N=50, TA=25ºC, IF=5mA)
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
100
I F =2mA
-40
-20
0
20
40
60
80
100
Temperature (ºC)
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please
contact our application department.
R03
www.clare.com
3
CPC1117N
PERFORMANCE DATA*
CPC1117N
Typical Turn-On vs. LED Forward Current
(IL=50mA)
CPC1117N
Typical Turn-Off vs. LED Forward Current
(IL=50mA)
0.7
1.8
0.6
1.6
I F =50mA
I F =30mA
I F =20mA
I F =10mA
I F =5mA
1.2
1.0
0.4
0.3
0.2
0.1
0
0.8
-40
-20
0
20
40
60
80
100
0
120
5
10
15
20
25
30
35
40
45
50
0.50
0.45
0.40
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0
0
5
10
15
20
25
30
35
40
45
50
Temperature (ºC)
LED Forward Current (mA)
LED Forward Current (mA)
CPC1117N
Typical On-Resistance vs. Temperature
(IL=150mA, IF=0mA)
CPC1117N
Typical IF for Switch Operation
vs. Temperature
(IL=50mA)
CPC1117N
Typical Load Current vs. Load Voltage
(TA=25ºC)
1.75
7
150
LED Current (mA)
1.50
6
5
4
3
Load Current (mA)
8
On-Resistance (Ω)
Time (ms)
0.5
1.4
Time (ms)
LED Forward Voltage Drop (V)
CPC1117N
Typical LED Forward Voltage Drop
vs. Temperature
1.25
1.00
0.75
0.25
-40
-20
0
20
40
60
80
100
Temperature (ºC)
50
0
-50
-100
0.50
2
100
-40
-20
0
20
40
60
Temperature (ºC)
80
100
-150
-1.00
-0.66
-0.33
0
0.33
0.66
1.00
Load Voltage (V)
Load Current (A)
CPC1117N
Energy Rating Curve
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
10μs 100μs 1ms 10ms 100ms
1s
10s 100s
Time
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please
contact our application department.
4
www.clare.com
R03
CPC1117N
MANUFACTURING INFORMATION
Moisture Sensitivity
Clare has characterized the moisture reflow sensitivity
of this package, and has determined that this
component must be handled in accordance with
IPC/JEDEC standard J-STD-033 moisture sensitivity
level (MSL), level 3 classification.
Pb
Soldering Reflow Profile
For proper assembly, the component must be
processed in accordance with the current revision
of IPC/JEDEC standard J-STD-020. Failure to
follow the recommended guidelines may cause
permanent damage to the device resulting in impaired
performance and/or a reduced lifetime expectancy.
e3
RoHS
2002/95/EC
Washing
Clare does not recommend ultrasonic cleaning or the
use of chlorinated solvents.
Mechanical Dimensions
4-Pin SOP Package
Recommended PCB Land Pattern
4.089 ± 0.203
(0.161 ± 0.008)
0.200 ± 0.025
(0.008 ± 0.001)
6.096 ± 0.102
(0.240 ± 0.004)
3.810 ± 0.076
(0.150 ± 0.003)
0.60
(0.0217)
0.432 ± 0.127
(0.017 ± 0.005)
1.02 ± 0.025
(0.040 ± 0.001)
Pin 1
2.54 Typ
(0.100 Typ)
5.60
(0.2205)
1.30
(0.0512)
2.54
(0.10)
2.184 Max
(0.086 Max)
0.0254 - 0.102
(0.001 - 0.004)
Dimensions
mm
(inches)
0.381 TYP.
(0.015 TYP.)
Tape and Reel Packaging for 4-Pin SOP Package
330.2 Dia
(13.00 Dia)
Top Cover
Tape Thickness
0.102 Max
(0.004 Max)
W=12.00 Max
(0.472 Max)
Pin 1
B0=4.70
(0.185)
K0=2.70
(0.106)
K1=2.30
(0.091)
P=8.00
(0.315)
A0=6.50
(0.256)
User Direction of Feed
Embossed
Carrier
Embossment
Dimensions
mm
(inches)
NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2
For additional information please visit our website at: www.clare.com
Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of
Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability,
fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental
damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice.
5
Specification: DS-CPC1117N-R03
©Copyright 2008, Clare, Inc.
OptoMOS® is a registered trademark of Clare, Inc.
All rights reserved. Printed in USA.
9/16/08
Similar pages