ONSEMI MPSA12RLRA

MPSA12
Darlington Transistors
NPN Silicon
Features
• Pb−Free Packages are Available*
http://onsemi.com
COLLECTOR 3
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Collector −Emitter Voltage
VCES
20
Vdc
Emitter Base Voltage
VEBO
10
Vdc
PD
625
5.0
mW
mW/°C
TJ, Tstg
−55 to +150
°C
Total Device Dissipation @ TA = 25°C
Derate above 25°C
Operating and Storage Junction
Temperature Range
BASE
2
EMITTER 1
MARKING
DIAGRAM
THERMAL CHARACTERISTICS
Characteristic
Symbol
Max
Unit
Thermal Resistance, Junction−to−Ambient
RqJA
200
°C/W
Maximum ratings are those values beyond which device damage can occur.
Maximum ratings applied to the device are individual stress limit values (not
normal operating conditions) and are not valid simultaneously. If these limits are
exceeded, device functional operation is not implied, damage may occur and
reliability may be affected.
2
RS
3
MPSA12 = Device Code
A
= Assembly Location
Y
= Year
WW
= Work Week
G
= Pb−Free Package
(Note: Microdot may be in either location)
in
en
TO−92
CASE 29−11
STYLE 1
1
MPS
A12
AYWW G
G
IDEAL
TRANSISTOR
ORDERING INFORMATION
Device
MPSA12
MPSA12G
Figure 1. Transistor Noise Model
MPSA12RLRA
MPSA12RLRAG
MPSA12RLRP
MPSA12RLRPG
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2006
January, 2006 − Rev. 1
1
Package
Shipping †
TO−92
5,000 Units/Box
TO−92
(Pb−Free)
5,000 Units/Box
TO−92
2,000/Tape & Reel
TO−92
(Pb−Free)
2,000/Tape & Reel
TO−92
2,000/Tape & Reel
TO−92
(Pb−Free)
2,000/Tape & Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
Publication Order Number:
MPSA12/D
MPSA12
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)
Characteristic
Symbol
Min
Max
Unit
V(BR)CES
20
−
Vdc
Collector Cutoff Current
(VCB= 15 Vdc, IE = 0)
ICBO
−
100
nAdc
Emitter Cutoff Current
(VEB= 12 Vdc, IC = 0)
IEBO
−
100
nAdc
20,000
−
OFF CHARACTERISTICS
Collector −Emitter Breakdown Voltage
(IC = 100 mAdc, IB = 0)
ON CHARACTERISTICS
hFE
Collector −Emitter Saturation Voltage
(IC = 10 mAdc, IB = 0.01 mAdc)
VCE(sat)
−
1.0
Vdc
Base −Emitter On Voltage
(IC = 10 mAdc, VCE = 5.0 Vdc)
VBE(on)
−
1.4
Vdc
r(t), TRANSIENT THERMAL
RESISTANCE (NORMALIZED)
DC Current Gain
(IC = 10 mAdc, VCE = 5.0 Vdc)
1.0
0.7
0.5
0.3
D = 0.5
0.2
0.2
0.1
0.05
SINGLE PULSE
0.1
0.07
0.05
SINGLE PULSE
0.03
ZqJC(t) = r(t) • RqJCTJ(pk) − TC = P(pk) ZqJC(t)
ZqJA(t) = r(t) • RqJATJ(pk) − TA = P(pk) ZqJA(t)
0.02
0.01
0.1
−
0.2
0.5
1.0
2.0
5.0
10
20
50
t, TIME (ms)
100
Figure 2. Thermal Response
http://onsemi.com
2
200
500
1.0k
2.0k
5.0k 10k
MPSA12
PACKAGE DIMENSIONS
TO−92 (TO−226)
CASE 29−11
ISSUE AL
A
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. CONTOUR OF PACKAGE BEYOND DIMENSION R
IS UNCONTROLLED.
4. LEAD DIMENSION IS UNCONTROLLED IN P AND
BEYOND DIMENSION K MINIMUM.
B
R
P
L
SEATING
PLANE
DIM
A
B
C
D
G
H
J
K
L
N
P
R
V
K
D
X X
G
J
H
V
C
SECTION X−X
1
N
INCHES
MIN
MAX
0.175
0.205
0.170
0.210
0.125
0.165
0.016
0.021
0.045
0.055
0.095
0.105
0.015
0.020
0.500
−−−
0.250
−−−
0.080
0.105
−−− 0.100
0.115
−−−
0.135
−−−
MILLIMETERS
MIN
MAX
4.45
5.20
4.32
5.33
3.18
4.19
0.407
0.533
1.15
1.39
2.42
2.66
0.39
0.50
12.70
−−−
6.35
−−−
2.04
2.66
−−−
2.54
2.93
−−−
3.43
−−−
STYLE 1:
PIN 1. EMITTER
2. BASE
3. COLLECTOR
N
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
N. American Technical Support: 800−282−9855 Toll Free
Literature Distribution Center for ON Semiconductor
USA/Canada
P.O. Box 61312, Phoenix, Arizona 85082−1312 USA
Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center
2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051
Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada
Phone: 81−3−5773−3850
Email: [email protected]
http://onsemi.com
3
ON Semiconductor Website: http://onsemi.com
Order Literature: http://www.onsemi.com/litorder
For additional information, please contact your
local Sales Representative.
MPSA12/D