FR101G - FR107G 1.0 AMP. Glass Passivated Fast Recovery Rectifiers DO-41 Features Glass passivated chip junction. High efficiency, Low VF High current capability High reliability High surge current capability Low power loss Mechanical Data Cases: Molded plastic Epoxy: UL 94V-0 rate flame retardant Lead: Pure tin plated, Lead free., solderable per MIL-STD-202, Method 208 guaranteed Polarity: Color band denotes cathode end High temperature soldering guaranteed: o 260 C /10 seconds/.375”,(9.5mm) lead lengths at 5 lbs.,(2.3kg) tension Weight: 0.34 gram Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25 oC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Symbol FR FR FR FR FR FR FR Units 101G 102G 103G 104G 105G 106G 107G Maximum Recurrent Peak Reverse Voltage V RRM 50 Maximum RMS Voltage V RMS V DC Maximum DC Blocking Voltage Maximum Average Forward Rectified Current .375”(9.5mm) Lead Length @T A = 75 oC Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @ 1.0A Maximum DC Reverse Current @ T A=25 oC o at Rated DC Blocking Voltage @ T A=125 C Maximum Reverse Recovery Time ( Note 1 ) Typical Junction Capacitance ( Note 2 ) Typical Thermal Resistance Operating Temperature Range 100 200 400 600 35 70 140 280 420 50 100 200 400 600 800 1000 V 560 700 V 800 1000 V I(AV) 1.0 A IFSM 30 A VF 1.3 V IR 5.0 100 uA uA nS pF o C/W o C o C Trr Cj R θJA TJ 150 250 10 70 -65 to +150 -65 to +150 Storage Temperature Range T STG 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A Notes: 2. Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C. 3. Mount on Cu-Pad Size 5mm x 5mm on P.C.B. 500 Version: A06 RATINGS AND CHARACTERISTIC CURVES (FR101G THRU FR107G) FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE FIG.2- TYPICAL REVERSE CHARACTERISTICS PER LEG 1000 Single Phase Half Wave 60Hz Resistive or Inductive Load 0.375" (9.5mm) Lead Length 1.25 1.00 INSTANTANEOUS REVERSE CURRENT. ( A) AVERAGE FORWARD CURRENT. (A) 1.50 0.75 0.50 0.25 0 0 25 50 75 100 125 150 175 o AMBIENT TEMPERATURE. ( C) 100 Tj=125 0C 10 Tj=75 0C 1 FIG.3- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT Tj=25 0C 0.1 0 40 40 60 80 100 120 140 30 Tj=25 0C 20 FIG.5- TYPICAL FORWARD CHARACTERISTICS 10 10 8.3ms Single Half Sine Wave JEDEC Method 0 1 2 4 6 8 10 20 NUMBER OF CYCLES AT 60Hz 40 60 80 100 FIG.4- TYPICAL JUNCTION CAPACITANCE 100 JUNCTION CAPACITANCE.(pF) 20 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) INSTANTANEOUS FORWARD CURRENT. (A) PEAK FORWARD SURGE CURRENT. (A) 50 Tj=25 0C 10 1.0 0.1 Tj=25oC Pulse Width=300 s 1% Duty Cycle .01 1 1 10 100 .4 .6 REVERSE VOLTAGE. (V) .8 1.0 1.2 1.4 1.6 FORWARD VOLTAGE. (V) FIG.6- REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 50W NONINDUCTIVE 10W NONINDUCTIVE trr +0.5A (-) DUT (+) 50Vdc (approx) (-) PULSE GENERATOR (NOTE 2) 1W NON INDUCTIVE OSCILLOSCOPE (NOTE 1) NOTES: 1. Rise Time=7ns max. Input Impedance= 1 megohm 22pf 2. Rise Time=10ns max. Sourse Impedance= 50 ohms 0 -0.25A (+) -1.0A 1cm SET TIME BASE FOR 5/ 10ns/ cm Version: A06