EPCOS B82141+1182K000 Sbc choke (small bobbin core) rated current 55 to 725 ma rated inductance 1 to 1000 Datasheet

Chokes and inductors
For high frequency and EMC
RF chokes, SBC series
Series/Type:
B82141A / B82141B
%BUB4IFFU
November 2005
Date:
© EPCOS AG 2005. Reproduction, publication and dissemination of this publication and the information contained therein without EPCOS’ prior express consent is prohibited.
RF chokes
B82141A
SBC series
B82141B
SBC choke (Small Bobbin Core)
Rated current 55 to 725 mA
Rated inductance 1 to 1000 NH
Construction
■ Mini ferrite drum core
■ Winding: enamel copper wire
■ Flame-retardant lacquer coating
Features
■ Small size
■ Relatively high rated current
■ RoHS-compatible (see page 6)
Applications
■ RF blocking and filtering
■ Decoupling and interference suppression
■ For electronic household appliances,
automotive and entertainment electronics
Terminals
■ Central axial leads, lead-free tinned
■ Radially bent to 5 mm lead spacing
Marking
Inductance indicated by color bands to IEC 60062
Delivery mode
Taped, Ammo and reel packing (see page 8)
Dimensional drawings
B82141A (axial leads, taped)
B82141B (central radial leads, taped)
3.5 min.
12,5
6.8 max.
(IEC 60294)
16
6±0.5
5±0.25 5±0.25
ø3 max.
ø0.6 max.
65±1
53
9.8 max.
5
lacquered/lackiert
12,7
IND0428-3
IND0116-4
Minimum lead spacing 10 mm
Schematic drawing (details page 8)
Approx. weight 0.22 g
Please read the Important notes at the end of
this document.
2
11/05
RF chokes
B82141A
SBC series
B82141B
Characteristics and ordering codes
For further technical data see page 6.
Tolerance1)
Qmin
MHz
mA
Ω
MHz
Ordering code 2)
(reel packing) 3)
± 10 %
^ K
40
7.96
725
0.19
180
B82141+1102K000
40
7.96
700
0.20
160
B82141+1122K000
1.5
40
7.96
670
0.22
155
B82141+1152K000
1.8
45
7.96
660
0.23
145
B82141+1182K000
2.2
45
7.96
630
0.25
130
B82141+1222K000
2.7
45
7.96
610
0.27
110
B82141+1272K000
3.3
50
7.96
580
0.30
90
B82141+1332K000
3.9
50
7.96
560
0.32
70
B82141+1392K000
4.7
50
7.96
530
0.36
60
B82141+1472K000
5.6
50
7.96
510
0.38
50
B82141+1562K000
6.8
50
7.96
480
0.43
40
B82141+1682K000
8.2
50
7.96
450
0.52
30
B82141+1822K000
10
55
2.52
410
0.60
25
B82141+1103K000
12
55
2.52
385
0.67
20
B82141+1123K000
15
55
2.52
365
0.74
17
B82141+1153K000
18
55
2.52
350
0.81
14
B82141+1183K000
22
55
2.52
335
0.90
12
B82141+1223K000
27
55
2.52
315
1.00
11
B82141+1273K000
33
55
2.52
300
1.12
10
B82141+1333K000
39
55
2.52
285
1.21
LR
μH
1.0
1.2
fQ
IR
Rmax
fres, min
8.5
1) Closer tolerances upon request.
2) Replace the + by code letter »A« for axial taping or by »B« for radial taping.
3) For Ammo pack the last digit has to be a »9«. Example: B82141A1102K009.
Please read the Important notes at the end of
this document.
3
11/05
B82141+1393K000
RF chokes
B82141A
SBC series
B82141B
Characteristics and ordering codes (continued)
For further technical data see page 5.
Rmax
MHz
mA
Ω
2.52
200
2.40
7.7
B82141+1473J000
55
2.52
195
2.60
6.8
B82141+1563J000
68
55
2.52
185
2.90
5.7
B82141+1683J000
82
55
2.52
175
3.20
5.5
B82141+1823J000
100
60
0.796
170
3.50
5.3
B82141+1104J000
120
60
0.796
160
3.80
5.0
B82141+1124J000
150
60
0.796
150
4.30
4.6
B82141+1154J000
180
60
0.796
135
5.30
4.2
B82141+1184J000
220
60
0.796
130
5.80
3.8
B82141+1224J000
270
60
0.796
115
7.80
3.2
B82141+1274J000
330
60
0.796
105
9.10
3.0
B82141+1334J000
390
60
0.796
95
11.0
2.7
B82141+1394J000
470
60
0.796
90
12.0
2.3
B82141+1474J000
560
60
0.796
75
16.5
2.2
B82141+1564J000
680
60
0.796
65
22.0
2.0
B82141+1684J000
820
60
0.796
60
25.0
1.8
B82141+1824J000
1000
60
0.796
55
33.0
1.5
B82141+1105J000
μH
47
56
Tolerance1)
Qmin
±5%
^ J
55
fQ
fres, min
Ordering code 2)
(reel packing)3)
IR
LR
MHz
1) Closer tolerances upon request.
2) Replace the + by code letter »A« for axial taping or by »B« for radial taping.
3) For Ammo pack the last digit has to be a »9«. Example: B82141B1473J009.
Please read the Important notes at the end of
this document.
4
11/05
RF chokes
B82141A
SBC series
B82141B
Impedance |Z |
versus frequency f
measured with impedance analyzer
HP 4191A / HP 4194A
IND0117-5
10 6
IND0118-7
10 4
B82141A/B
Ω
| Z|
Inductance L
versus DC load current IDC
measured with LCR meter
HP 4275A
B82141A/B
µH
L
10 5
1000 µH
10 3
10 4
100 µH
10 2
10 3
10 µH
10 1
1 µH
10 µH
100 µH
1000 µH
10 2
10 1
10 0 6
10
10
7
10
8
Hz 10
f
10
9
_1
10
Q factor
versus frequency f
measured with impedance analyzer
HP 4194A
_2
10
_1
10 0
A 10 1
I DC
Current derating Iop/IR
versus ambient temperature TA
(rated temperature TR = 40 °C)
IND0119-9
100
1 µH
10 0
IND0552-S-E
1.2
B82141A/B
I op
IR
Q
1000 µH
100 µH
10 µH
1 µH
1.0
0.8
0.6
50
0.4
0.2
0
10 4
10 5
10 6
10 7
0
Hz 10 8
f
Please read the Important notes at the end of
this document.
0
20
40
60
80
100
˚C 140
TA
5
11/05
RF chokes
B82141A
SBC series
B82141B
General technical data
Rated inductance LR
Measuring frequency: L ≤ 10 μH
= 1 MHz
10 μH < L ≤ 4700 μH = 100 kHz
L > 4700 μH
= 10 kHz
Measuring current:
≤ 1 mA
Distance between
measuring clamps:
25.4 mm
Q factor Qmin
Measured with HP 4342A
Rated current IR
Maximum permissible DC current
referred to 40 °C ambient temperature,
for derating see below
Inductance decrease ΔL/L0
≤10% (referred to initial value) at IR
at 20 °C ambient temperature
DC resistance Rmax
Measured at 20 °C ambient temperature,
distance between measuring clamps: 25.4 mm
Resonance frequency fres, min
Measured with Scalar Network Analyzer ZAS
from Rohde & Schwarz
Climatic category
55/125/56 (–55 °C/+125 °C/56 days damp heat test)
to IEC 60068-1
Solderability
235 °C, 2 s, ≥90% wetting
to IEC 60068-2–20, test Ta
Resistance to soldering heat
To IEC 60068-2-20, test Tb 260 °C, 10 s
Tensile strength of leads
To IEC 60068-2-21, test Ua ≥20 N
RoHS-compatible
RoHS-compatible is defined as compatible with the following documents:
DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 13 February 2003 on the
restriction of the use of certain hazardous substances in
electrical and electronic equipment COM (2004) 606 final
Proposal for a COUNCIL DECISION amending Directive
2002/95/EC of the European Parliament and of the Council
for the purposes of establishing the maximum concentration values for certain hazardous substances in electrical
and electronic equipment.
Mounting information
When bending the leads, take care that the start-of-winding
areas at the face ends (protected by glue and
lacquer) are not subjected to any mechanical stress.
Please read the Important notes at the end of
this document.
6
11/05
RF chokes
B82141A
SBC series
B82141B
Color coding of the inductance value
The inductance value and tolerance are encoded by means of colored bands in accordance with
IEC 60062. The basic unit is μH.
1st band
2nd band
3rd band
4th band
1st digit of inductance value
2nd digit of inductance value
multiplier, i.e. the power of ten, by which the first two digits have to be multiplied.
tolerance of the inductance value.
Color code
1st band =
1st digit
2nd band =
2nd digit
3rd band =
multiplier
Colorless
—
—
—
Silver
—
—
× 10-2 μH =
Gold
—
—
Black
—
0
4th band =
tolerance
± 20 % (M)
0.01 μH
± 10 % (K)
× 10-1 μH =
0.1 μH
± 5 % (J)
× 100 μH =
1,01 μH
—
Brown
1
1
×
μH =
10,01 μH
Red
2
2
× 102 μH =
100,01 μH
Orange
3
3
× 103 μH =
1000,01 μH
Yellow
4
4
× 104 μH = 10000,01 μH
Green
5
5
× 105 μH = 100000,01 μH
Blue
6
6
Violet
7
7
Grey
8
8
White
9
9
101
± 2 % (G)
Special
designs
manufactured
to
customer specifications are identified
by a white tolerance
band.
Examples:
1st band
2nd band
3rd band
Yellow
4
Violet
7
Gold
Silver
× 0.1 μH ± 10 %
= 47 ×
Brown
1
Green
5
Red
Gold
× 100,0 μH ± 5 %
= 15 × 100,0 μH ± 5 % = 1500,0 μH ± 5 %
Please read the Important notes at the end of
this document.
4th band
7
Decoding
11/05
0.1 μH ± 10 % =
4.7 μH ± 10 %
RF chokes
B82141A
SBC series
B82141B
Taping and packing
Axially taped (to IEC 60286-1)
6.8 max.
(IEC 60294)
3.5 min.
6±0.5
5±0.25 5±0.25
ø3 max.
ø0.6 max.
65±1
53
9.8 max.
lacquered/lackiert
IND0428-3
_ 0.5
9 +0.75
6 min.
_ 0.5
18 +1
0.5 max.
0.6 max.
1.3 max.
insulated
isoliert
29 max.
2 max.
9.8 max.
lacquered/lackiert
2 max.
16±0.5
ø3 max.
1.3 max.
6.8 max.
(IEC 60294)
Radially taped (to IEC 60286-2)
_ 0.1
5 +0.6
3.8±0.7
4±0.2
0.7±0.2
12.7±0.3
Please read the Important notes at the end of
this document.
IND0445-5
8
11/05
RF chokes
B82141A
SBC series
B82141B
30
ø90
30
ø82+1
ø360 _ 1
ø30.5±0.15
Reel packing
30
Axial
n
Label
Etikett
w
IND0452-V
Radial
n (mm)
72 +1
42 +1
w (mm)
84 max.
54 max.
Ammo pack
H
Axial
L (mm)
L
B (mm)
H (mm
B
SSB1858-W
Packing units
Reel packing
pcs./reel
Ammo pack
pcs./pack.
Axial
5000
5000
Radial
2000
2500
Please read the Important notes at the end of
this document.
9
11/05
Radial
310 max. 340 max.
75 max.
50 max.
120 max. 210 max.
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements
about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with
them than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of passive electronic components
or failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the
malfunction or failure of a passive electronic component could endanger human life or health
(e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of
protective circuitry or redundancy) that no injury or damage is sustained by third parties in the
event of malfunction or failure of a passive electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as “hazardous”). Useful information on this will be found in our Material
Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed
questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version
of the “General Terms of Delivery for Products and Services in the Electrical Industry”
published by the German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, CeraDiode, CSSP, PhaseCap, PhaseMod, SilverCap, SIFI, SIMID,
SIKOREL, SIOV, SIP5D, SIP5K, TOPcap, UltraCap, WindCap are trademarks registered or
pending in Europe and in other countries. Further information will be found on the Internet at
www.epcos.com/trademarks.
10
11/05
Similar pages