Vishay AGP15-400 Miniature glass passivated junction plastic controlled avalanche rectifier Datasheet

AGP15 Series
Vishay Semiconductors
formerly General Semiconductor
Miniature Glass Passivated Junction
Plastic Controlled Avalanche Rectifiers
Features
0.034 (0.86)
0.028 (0.71)
Dia.
DO-204AC
(DO-15)
Reverse Voltage
400 to 800V
Forward Current 1.5A
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
• High temp. metallurgically bonded constructed rectifiers
• Controlled Avalanche characteristic combined with the
ability to dissipate reverse power
• Glass passivated cavity-free junction in DO-15 package
• 1.5 Ampere operation at TA=55°C with no thermal runaway
• Typical IR less than 0.1µA
• Capable of meeting environmental standards of MIL-S-19500
• High temperature soldering guaranteed: 350°C/10 seconds,
0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension
*
d
e
t
n
e
t
Pa
1.0 (25.4)
min.
®
Dimensions in inches
and (millimeters)
0.300 (7.6)
0.230 (5.8)
Mechanical Data
0.140 (3.6)
0.104 (2.6)
Dia.
*Glass-plastic encapsulation
technique is covered by
Patent No. 3,996,602 of 1976;
1.0 (25.4)
brazed-lead assembly by
min.
Patent No. 3,930,306 of 1976
and glass composition by
Patent No. 3,752,701 of 1973
Case: Molded plastic over glass
Terminals: Plated axial leads, solderable per
MIL-STD-202, Method 208
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.0154 oz., 0.4 g
Maximum Ratings & Thermal Characteristics
Parameter
Ratings at 25°C ambient temperature unless otherwise specified.
Symbol
AGP15-400 AGP15-600 AGP15-800
Unit
Maximum Recurrent Peak Reverse Voltage
VRRM
400
600
800
V
Maximum RMS voltage
VRMS
280
420
560
V
VDC
400
600
800
V
Maximum DC blocking voltage
Maximum Peak Power Dissipation in the
Avalanch Region 20 µs Pulse
PRM
500
W
Max. Average Forward Rectified Current 0.375” (9.5mm)
Lead Lengths at TA = 55°C
IAV
1.5
A
Peak forward surge current 8.3ms single half sine-wave
superimposed on rated load (JEDEC Method)
IFSM
50
A
Maximum full load reverse current, full cycle average
0.375" (9.5mm) lead length at TA = 55°C
IR(AV)
100
µA
Typical thermal resistance (Note 1)
RθJA
25
°C/W
TJ, TSTG
–65 to +175
°C
Operating and storage temperature range
Electrical Characteristics
Ratings at 25°C ambient temperature unless otherwise specified.
Minimum Avalanche Breakdown Voltage at 100µA
VBR
450
675
880
V
Maximum Avalanche Breakdown Voltage at 100µA
VBR
750
1000
1200
V
Maximum instantaneous forward voltage at 1.5A
VF
1.1
V
Maximum reverse current at rated DC blocking voltage
IR
5.0
µA
Typical reverse recovery time IF=0.5A, IR=1.0A, Irr=0.25A
trr
2.0
µs
Typical junction capacitance at 4.0V, 1MHz
CJ
15
pF
Note: (1) Thermal resistance from junction to ambient at 0.375” (9.5mm) lead length, P.C. Board mounted
Document Number 88535
08-Jul-02
www.vishay.com
1
AGP15 Series
Vishay Semiconductors
formerly General Semiconductor
Ratings and
Characteristic Curves (TA = 25°C unless otherwise noted)
Fig. 2 – Typical Instantaneous
Forward Characteristics
Fig. 1 – Maximum Forward Current
Derating Curve
10
Instantaneous Forward Current (A)
Average Forward Rectified Current (A)
1.5
1.25
1.0
0.75
0.5
Single Phase Half Wave
60HZ Resistive or Inductive Load
0.375” (9.5mm) Lead Length
0.25
0
25
50
75
100
125
150
175
0.1
TJ = 25°C
Pulse Width = 300µs
2% Duty Cycle
0.01
.4
.6
.8
1.0
1.2
1.4
Ambient Temperature (°C)
Instantaneous Forward Voltage (V)
Fig. 3 – Maximum Non-Repetitive Peak
Forward Surge Current
Fig. 4 – Typical Reverse Leakage
Characteristics
Instantaneous Reverse Leakage Current
(µA)
100
Peak Forward Surge Current (A)
1.0
10
TA = 55°C
8.3ms Single Half Sine-Wave
(JEDEC Method)
1.6
10
TJ = 125°C
1
TJ = 75°C
0.1
TJ = 25°C
0.01
1
1
10
100
Number of Cycles at 60HZ
0
20
40
60
80
100
Percent of Rated Peak Reverse Voltage (%)
Fig. 5 – Maximum Non-Repetitive
Reverse Avalanche Power Dissipation
Peak Reverse Avalanche Power (W)
1,000
TJ = 25°C
100
10
10
100
1,000
10,000
Pulse Duration (µs)
www.vishay.com
2
Document Number 88535
08-Jul-02
Similar pages