D4SB10 ~ D4SB100
100 V ~ 1000 V
6.0 Amp High Current Glass Passivated
Molding Single-Phase Bridge Rectifier
Elektronische Bauelemente
RoHS Compliant Product
A suffix of “-C” specifies halogen-free and RoHS Compliant
D3-4SB
FEATURES
Plastic Package has Underwriters
Laboratory Flammability Classification 94V-0
This Series is UL listed under the Recognized Component index,
file number E231047
Single-in-line package
High current capacity with small package
Superior thermal conductivity
High temperature soldering guaranted：
260°C / 10 seconds
High IFSM
C
R
A
J
N
F
H
Q
S
B
G
K
D
P
E
L L L
Millimeter
Min.
Max.
24.7
25.3
14.7
15.3
4.58
4.62
17.0
18.0
0.50
0.90
4.50 REF.
3.50
3.90
9.3
9.7
REF.
A
B
C
D
E
G
J
F
MAXIMUM RATINGS (TA=25℃ unless otherwise noted)
REF.
K
L
N
P
Q
R
S
H
Millimeter
Min.
Max.
2.50
2.90
7.30
7.70
3 X 45°
0.90
1.10
1.50 REF.
3.00
3.40
0.8
1.2
3.0
4.0
PART NUMBERS
PARAMETERS
Maximum repetitive voltage
Maximum DC reverse current at @TA=25°C
rated DC blocking voltage
@TA=125°C
Average rectified forward
@TC=100°C
current 60Hz Sine wave
@TA=25°C
Resistance load
Peak Forward Surge Current 10ms single half
sine-wave superimposed on rated load
Maximum Instantaneous
Forward Voltage @ 3.0A
Dielectric strength terminals to case,
AC 1 minute Current 1mA
Maximum thermal on P.C.B without heat-sink
Resistance per leg
on AI plate heat-sink
Operating and Storage Temperature Range
SYMBOL
VRM
IR
IO
D4SB
10
100
D4SB
20
200
D4SB D4SB
40
60
400
600
10
D4SB
80
800
D4SB
100
1000
UNITS
V
A
500
6 (1)
A
2.8 (2)
IFSM
150
A
VF
1.1
V
Vdia
2.5
KV
RθJA
22 (2)
RθJC
3.4 (1)
TJ , TSTG
150 , -40 ~ 150
°C / W
°C
Notes：
(1) Unit case mounted on AI plate heat-sink
(2) Unites mounted on P.C.B. without heat-sink
(3) Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat
transfer with #6 screw {heat-sink size：6.5 * 4.0 * 0.3cm}
http://www.SeCoSGmbH.com/
05-Aug-2010 Rev. A
Any changes of specification will not be informed individually.
Page 1 of 2
D4SB10 ~ D4SB100
Elektronische Bauelemente
100 V ~ 1000 V
6.0 Amp High Current Glass Passivated
Molding Single-Phase Bridge Rectifier
CHARACTERISTIC CURVES
http://www.SeCoSGmbH.com/
05-Aug-2010 Rev. A
Any changes of specification will not be informed individually.
Page 2 of 2