Freescale MC8640DTVU1000H Integrated host processor hardware specifications addendum for the mc8640xtxxyyyyac sery Datasheet

Freescale Semiconductor
Technical Data
Document Number: MPC8640DECS01AD
Rev. 0, 12/2008
MPC8640 and MPC8640D
Integrated Host Processor
Hardware Specifications Addendum
for the MC8640xTxxyyyyaC Series
This document describes part-number-specific changes to
recommended operating conditions and revised electrical
specifications, as applicable, from those described in the
general MPC8640 and MPC8640D Integrated Host
Processor Hardware Specifications
(Document No. MPC8640DEC).
Specifications provided in this document supersede those in
the MPC8640 and MPC8640D Integrated Host Processor
Hardware Specifications, Rev. 1 or later, for the part
numbers listed in Table A only. Specifications not addressed
herein are unchanged.
Because this document is frequently updated, refer to the
website listed on the back page of this document or contact
your Freescale sales office for the latest version.
Note that headings and table numbers in this document are
not consecutively numbered. They are intended to
correspond to the heading or table affected in the general
hardware specification.
© Freescale Semiconductor, Inc., 2008. All rights reserved.
Freescale Part Numbers Affected:
MC8640DTHX1250HC
MC8640DTHX1000HC
MC8640DTHX1067NC
MC8640DTVU1250HC
MC8640DTVU1000HC
MC8640DTVU1067NC
MC8640THX1250HC
MC8640THX1000HC
MC8640THX1067NC
MC8640TVU1250HC
MC8640TVU1000HC
MC8640TVU1067NC
General Parameters
Part numbers addressed in this document are listed in Table A.
Table A. Part Numbers Addressed by This Data Sheet
Operating Conditions
Freescale
Part Number
Significant Differences from
Hardware Specification
CPU
Frequency
(MHz)
VDD_Coren
Tj
(°C)
MC8640DTHX1250HC
1250
1.05 V ± 50 mV
–40 to 105
MC8640DTHX1000HC
1000
1.05 V ± 50 mV
MC8640DTHX1067NC
1067
0.95 V ± 50 mV
MC8640DTVU1250HC
1250
1.05 V ± 50 mV
MC8640DTVU1000HC
1000
1.05 V ± 50 mV
MC8640DTVU1067NC
1067
0.95 V ± 50 mV
MC8640THX1250HC
1250
1.05 V ± 50 mV
MC8640THX1000HC
1000
1.05 V ± 50 mV
MC8640THX1067NC
1067
0.95 V ± 50 mV
MC8640TVU1250HC
1250
1.05 V ± 50 mV
MC8640TVU1000HC
1000
1.05 V ± 50 mV
MC8640TVU1067NC
1067
0.95 V ± 50 mV
2
Modified JTAG AC timing; extended junction
temperature range.
General Parameters
This section summarizes changes to the general parametersof the MPC8640 described in the MPC8640
and MPC8640D Integrated Host Processor Hardware Specifications.
• Modified JTAG AC timing
— tJTDVKH (min) = 15 ns
• Extended junction temperature range
— TJ = –40 to 105 °C
2.1
2.1.2
Overall DC Electrical Characteristics
Recommended Operating Conditions
Table 2 provides the recommended operating conditions for the MPC8640 part numbers described herein.
Table 2. Recommended Operating Conditions
Characteristic
Junction temperature range
Symbol
Recommended
Value
Unit
Notes
TJ
–40 to 105
°C
—
MPC8640 and MPC8640D Integrated Host Processor Hardware Specifications Addendum for the MC8640xTxxyyyyaC
Series, Rev. 0
2
Freescale Semiconductor
General Parameters
11.2
JTAG AC Electrical Specifications
Table 43 provides the JTAG AC electrical specifications for the MPC8640 part numbers described herein.
Table 43. JTAG AC Timing Specifications (Independent of SYSCLK) 1
At recommended operating conditions (see Table 3).
Parameter
Symbol 2
Min
Max
tJTDVKH
tJTIVKH
15
0
—
—
Unit
Notes
ns
Input setup times:
Boundary-scan data
TMS, TDI
4
Notes:
1. All outputs are measured from the midpoint voltage of the falling/rising edge of tTCLK to the midpoint of the signal
in question. The output timings are measured at the pins. All output timings assume a purely resistive 50-Ω load
(see Figure 32). Time-of-flight delays must be added for trace lengths, vias, and connectors in the system.
2. The symbols used for timing specifications herein follow the pattern of t(first two letters of functional block)(signal)(state)
(reference)(state) for inputs and t(first two letters of functional block)(reference)(state)(signal)(state) for outputs. For example,
tJTDVKH symbolizes JTAG device timing (JT) with respect to the time data input signals (D) reaching the valid state
(V) relative to the tJTG clock reference (K) going to the high (H) state or setup time. Also, tJTDXKH symbolizes JTAG
timing (JT) with respect to the time data input signals (D) went invalid (X) relative to the tJTG clock reference (K)
going to the high (H) state. Note that, in general, the clock reference symbol representation is based on three letters
representing the clock of a particular functional. For rise and fall times, the latter convention is used with the
appropriate letter: R (rise) or F (fall).
4. Non-JTAG signal input timing with respect to tTCLK.
MPC8640 and MPC8640D Integrated Host Processor Hardware Specifications Addendum for the MC8640xTxxyyyyaC
Series, Rev. 0
Freescale Semiconductor
3
Ordering Information
21 Ordering Information
21.1 Part Numbers Addressed by This Specification
Table 73 provides the ordering information for the MPC8640 parts described in this document.
Table 73. Part Numbering Nomenclature
uu
nnnn
Product
Part
Code
Identifier
D
Core
Count
w
Temp
Blank =
Single Core
MC5
8640
D=
Dual Core
T:
–40°C to
105°C
xx
Package
1
yyyy
a
z
Core
Processor
Frequency 2
(MHz)
DDR speed
(MHz)
Product Revision Level
Revision C = 2.1
System Version Register
Value for Rev C:
4
1000, 1067, N = 533 MHz 0x8090_0021 - MPC8640
1250
VU = RoHS lead-f
H = 500 MHz
0x8090_0121 - MPC8640D
ree HCTE
FC-CBGA
HX = High-lead
HCTE FC-CBGA
Notes:
1. See Section 16, “Package,” for more information on available package types.
2. Processor core frequencies supported by parts addressed by this specification only. Not all parts described in this specification
support all core frequencies. Additionally, parts addressed by part number specifications may support other maximum core
frequencies.
3. The P prefix in a Freescale part number designates a “Pilot Production Prototype” as defined by Freescale SOP 3-13. These parts
have only preliminary reliability and characterization data. Before pilot production prototypes may be shipped, written
authorization from the customer must be on file in the applicable sales office acknowledging the qualification status and the fact
that product changes may still occur while shipping pilot production prototypes.
4. Part Number MC8640xxx1067NC is our low VDD_Coren device. VDD_Coren = 0.95 V and VDD_PLAT = 1.05 V.
5. MC - Qualified production
Document Revision History
Table B provides a revision history for this hardware specification addendum.
Table B. Document Revision History
Rev.
Number
Date
0
12/2008
Substantive Change(s)
Initial release.
MPC8640 and MPC8640D Integrated Host Processor Hardware Specifications Addendum for the MC8640xTxxyyyyaC
Series, Rev. 0
4
Freescale Semiconductor
Ordering Information
THIS PAGE INTENTIONALLY LEFT BLANK
MPC8640 and MPC8640D Integrated Host Processor Hardware Specifications Addendum for the MC8640xTxxyyyyaC
Series, Rev. 0
Freescale Semiconductor
5
Ordering Information
THIS PAGE INTENTIONALLY LEFT BLANK
MPC8640 and MPC8640D Integrated Host Processor Hardware Specifications Addendum for the MC8640xTxxyyyyaC
Series, Rev. 0
6
Freescale Semiconductor
Ordering Information
MPC8640 and MPC8640D Integrated Host Processor Hardware Specifications Addendum for the MC8640xTxxyyyyaC
Series, Rev. 0
Freescale Semiconductor
7
How to Reach Us:
Home Page:
www.freescale.com
Web Support:
http://www.freescale.com/support
USA/Europe or Locations Not Listed:
Freescale Semiconductor, Inc.
Technical Information Center, EL516
2100 East Elliot Road
Tempe, Arizona 85284
1-800-521-6274 or
+1-480-768-2130
www.freescale.com/support
Europe, Middle East, and Africa:
Freescale Halbleiter Deutschland GmbH
Technical Information Center
Schatzbogen 7
81829 Muenchen, Germany
+44 1296 380 456 (English)
+46 8 52200080 (English)
+49 89 92103 559 (German)
+33 1 69 35 48 48 (French)
www.freescale.com/support
Information in this document is provided solely to enable system and software
implementers to use Freescale Semiconductor products. There are no express or
implied copyright licenses granted hereunder to design or fabricate any integrated
circuits or integrated circuits based on the information in this document.
Freescale Semiconductor reserves the right to make changes without further notice to
any products herein. Freescale Semiconductor makes no warranty, representation or
guarantee regarding the suitability of its products for any particular purpose, nor does
Freescale Semiconductor assume any liability arising out of the application or use of
any product or circuit, and specifically disclaims any and all liability, including without
limitation consequential or incidental damages. “Typical” parameters which may be
provided in Freescale Semiconductor data sheets and/or specifications can and do
vary in different applications and actual performance may vary over time. All operating
parameters, including “Typicals” must be validated for each customer application by
customer’s technical experts. Freescale Semiconductor does not convey any license
Japan:
Freescale Semiconductor Japan Ltd.
Headquarters
ARCO Tower 15F
1-8-1, Shimo-Meguro, Meguro-ku
Tokyo 153-0064
Japan
0120 191014 or
+81 3 5437 9125
[email protected]
under its patent rights nor the rights of others. Freescale Semiconductor products are
Asia/Pacific:
Freescale Semiconductor China Ltd.
Exchange Building 23F
No. 118 Jianguo Road
Chaoyang District
Beijing 100022
China
+86 10 5879 8000
[email protected]
claims, costs, damages, and expenses, and reasonable attorney fees arising out of,
For Literature Requests Only:
Freescale Semiconductor
Literature Distribution Center
P.O. Box 5405
Denver, Colorado 80217
1-800 441-2447 or
+1-303-675-2140
Fax: +1-303-675-2150
LDCForFreescaleSemiconductor
@hibbertgroup.com
Document Number: MPC8640DECS01AD
Rev. 0
12/2008
not designed, intended, or authorized for use as components in systems intended for
surgical implant into the body, or other applications intended to support or sustain life,
or for any other application in which the failure of the Freescale Semiconductor product
could create a situation where personal injury or death may occur. Should Buyer
purchase or use Freescale Semiconductor products for any such unintended or
unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor
and its officers, employees, subsidiaries, affiliates, and distributors harmless against all
directly or indirectly, any claim of personal injury or death associated with such
unintended or unauthorized use, even if such claim alleges that Freescale
Semiconductor was negligent regarding the design or manufacture of the part.
Freescale and the Freescale logo are trademarks or registered trademarks
of Freescale Semiconductor, Inc. in the U.S. and other countries. All other
product or service names are the property of their respective owners. The
Power Architecture and Power.org word marks and the Power and
Power.org logos and related marks are trademarks and service marks
licensed by Power.org.
© Freescale Semiconductor, Inc., 2008. All rights reserved.
Similar pages