MOTOROLA MHL19926 Pcs band rf linear ldmos amplifier Datasheet

MOTOROLA
Freescale Semiconductor, Inc.
Order this document
by MHL19926/D
SEMICONDUCTOR TECHNICAL DATA
The RF Line
PCS Band
RF Linear LDMOS Amplifier
MHL19926
Freescale Semiconductor, Inc...
Designed for ultra--linear amplifier applications in 50 Ohm systems operating
in the PCS frequency band. A silicon FET Class A design provides outstanding
linearity and gain. In addition, the excellent group delay and phase linearity
characteristics are ideal for digital modulation systems, such as TDMA, EDGE
and CDMA.
• Third Order Intercept Point: 50 dBm Typ
• Power Gain: 29.4 dB Typ (@ f = 1960 MHz)
• Excellent Phase Linearity and Group Delay Characteristics
• Ideal for Feedforward Base Station Application
1930--1990 MHz, 10 W, 29.4 dB
RF LINEAR LDMOS AMPLIFIER
CASE 301AY--01, STYLE 1
ABSOLUTE MAXIMUM RATINGS (TC = 25°C unless otherwise noted)
Symbol
Value
Unit
DC Supply Voltage
VDD
30
Vdc
RF Input Power
Pin
+17
dBm
Storage Temperature Range
Tstg
--40 to +100
°C
Operating Case Temperature Range
TC
--20 to +100
°C
Rating
ELECTRICAL CHARACTERISTICS (TC = +25°C; VDD = 26 Vdc; 50 Ω System)
Characteristic
Supply Current
Symbol
Min
Typ
Max
Unit
IDD
—
1
1.05
A
Power Gain
(f = 1960 MHz)
Gp
28.4
29.4
30.4
dB
Gain Flatness
(f = 1930--1990 MHz)
GF
—
0.3
0.5
dB
Power Output @ 1 dB Compression
(f = 1960 MHz)
P1 dB
39
40
—
dBm
Input VSWR
(f = 1930--1990 MHz)
VSWRin
—
1.2:1
1.5:1
Third Order Intercept
(f1 =1957 MHz, f2=1962 MHz)
ITO
49.5
50
—
dBm
Noise Figure
(f = 1990 MHz)
NF
—
4.2
5
dB
NOTE -- CAUTION -- MOS devices are susceptible to damage from electrostatic charge. Reasonable precautions in handling and
packaging MOS devices should be observed.
REV 2
MOTOROLA
RF DEVICE DATA
 Motorola,
Inc. 2003
For More Information On This Product,
Go to: www.freescale.com
MHL19926
1
Freescale Semiconductor, Inc.
PACKAGE DIMENSIONS
A
G
B
0.51 (0.020)
A
B
T A
M
S
M
R
DIM
A
B
C
D
E
F
G
H
J
K
L
M
N
P
Q
R
S
W
S
1
2
3 4
5
J
5X
Freescale Semiconductor, Inc...
NOTES:
1. CONTROLLING DIMENSION: MILLIMETER.
2. INTERPRET DIMENSIONS AND TOLERANCES
PER ANSI Y14.5M, 1982.
3. DIMENSION F TO CENTER LINE OF LEADS.
2X
W
K
Q
0.2 (0.008)
M
T S
M
A
M
M
N
L
H
5X
D
0.51 (0.020)
M
T B
M
STYLE 1:
PIN 1.
2.
3.
4.
5.
CASE:
T
C
5X
SEATING PLANE
P
0.51 (0.020)
M
T B
E
MILLIMETERS
MIN
MAX
44.7
45.21
34.8
35.31
6.22
6.73
0.43
0.58
2.03
2.54
2.18 BSC
41.91 BSC
32.77 BSC
6.76
7.11
3.18
4.19
25.15 BSC
7.37 BSC
9.91 BSC
0.2
0.33
3
3.35
13.59
14.1
11.3
11.81
2.29 BSC
INCHES
MIN
MAX
1.760
1.780
1.370
1.390
0.245
0.265
0.017
0.023
0.080
0.100
0.086 BSC
1.650 BSC
1.290 BSC
0.266
0.280
0.125
0.165
0.990 BSC
0.290 BSC
0.390 BSC
0.008
0.013
0.118
0.132
0.535
0.555
0.445
0.465
0.090 BSC
RF INPUT
VDD1
VDD2
VDD3
RF OUTPUT
GROUND
F
M
CASE 301AY--01
ISSUE O
Information in this document is provided solely to enable system and software implementers to use Motorola products. There are no express or implied copyright
licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document.
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters that may be provided in Motorola
data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including
“Typicals”, must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the
rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other
applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury
or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola
and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that
Motorola was negligent regarding the design or manufacture of the part.
MOTOROLA and the Stylized M Logo are registered in the US Patent and Trademark Office. All other product or service names are the property of their respective
owners. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer.
E Motorola Inc. 2003
HOW TO REACH US:
USA/EUROPE/LOCATIONS NOT LISTED:
Motorola Literature Distribution
P.O. Box 5405, Denver, Colorado 80217
1--800--521--6274 or 480--768--2130
JAPAN: Motorola Japan Ltd.; SPS, Technical Information Center,
3--20--1, Minami--Azabu, Minato--ku, Tokyo 106--8573, Japan
81--3--3440--3569
ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Centre,
2 Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong
852--26668334
HOME PAGE: http://motorola.com/semiconductors
MHL19926
2
MOTOROLA RF DEVICE DATA
◊For More Information On This Product,
Go to: www.freescale.com
MHL19926/D
Similar pages