Ecliptek EB13D1E2H-40000M Oscillator Datasheet

Marketing Bulletin
DATE:
January 1st, 2006
TO:
All Sales Personnel
FROM:
Mark Stoner
RE:
Product Termination
To all concerned parties,
This bulletin is to notify all customers of the discontinuation of the following Ecliptek
series effective January 1st, 2006:
Series
EB13D1
Description
3.3V 5 x 3.2mm SMD Oscillator
Recommended Replacement
EC36
In compliance with our End of Life (EOL) policy, this will serve as advanced notice of
product termination. New orders will not be accepted after April 1st, 2006, with delivery
to conclude by July 1st 2006.
If there are any questions pertaining to this bulletin, please fell free to contact me.
Thank you again for your cooperation.
Best Regards,
Mark W. Stoner
Director of Marketing
Ecliptek Corporation
3545 CADILLAC AVENUE • COSTA MESA, CA 92626-1401 • (714) 433-1200 • Fax (714) 433-1234
EB13D1 Series
EB13D1
• RoHS Compliant (Pb-Free)
• Low Jitter
• Ceramic SMD package
• 3.3V supply voltage
• LVHCMOS
• Stability to 20ppm
• Standby Function
• Available in tube or tape and reel
H 1.3
L 5.0
W 3.2
OSCILLATOR
NOTES
OBSOLETE
__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
ELECTRICAL SPECIFICATIONS
Frequency Range
Operating Temperature Range
Storage Temperature Range
Supply Voltage (VDD)
Input Current
Frequency Tolerance / Stability
19.440MHz to 100.000MHz
0°C to 70°C
-40°C to 85°C
-55°C to 125°C
3.3VDC ±10%
10mA Maximum
25mA Maximum
35mA Maximum
±100ppm, ±50ppm, ±25ppm or
±20ppm Maximum
19.440MHz to 34.999MHz
35.000MHz to 49.999MHz
50.000MHz to 100.000MHz
Inclusive of all conditions: Calibration Tolerance at 25°C,
Frequency Stability over the Operating Temperature Range,
Supply Voltage Change, Output Load Change, First Year Aging
at 25°C, Shock, and Vibration
Output Voltage Logic High (VOH)
Output Voltage Logic Low (VOL)
Rise / Fall Time
20% to 80% of Waveform from 19.440MHz to 35.000MHz
20% to 80% of Waveform from 35.001MHz to 80.000MHz
20% to 80% of Waveform from 80.001MHz to 100.000MHz
Duty Cycle
at 50% of Waveform
at 50% of Waveform
Load Drive Capability
< 35.000MHz
> 35.001MHz
Tri-State Input Voltage
No Connection
VIH :≥90% of VDD
VIL :≤10% of VDD
Standby Current
Disabled Output: High Impedance
Start Up Time
RMS Phase Jitter
19.440MHz to 40.000MHz, FJ = 12kHz to 20MHz
40.001MHz to 70.000MHz, FJ = 12kHz to 20MHz
70.001MHz to 100.000MHz, FJ = 12kHz to 20MHz
90% of VDD Min. IOH= -8mA
10% of VDD Max. IOL= +8mA
6 nSec Maximum
4 nSec Maximum
2 nSec Maximum
50 ±10(%)
50 ±5(%)
30pF HCMOS Load Maximum
15pF HCMOS Load Maximum
Enables Output
Enables Output
Disables Output: High Impedance
10µA Maximum
10 mSec Maximum
5 pSec Maximum
3 pSec Maximum
1 pSec Maximum
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
REV.DATE
ECLIPTEK CORP.
OSCILLATOR
EB13D1
CERAMIC
3.3V
OS2U
12/03
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
PART NUMBERING GUIDE
EB13D1 F 2 H - 40.000M TR
PACKAGING OPTIONS
Blank=Bulk, TR=Tape and Reel (Standard)
FREQUENCY TOLERANCE / STABILITY
C=±100ppm Maximum over 0°C to +70°C
D=±50ppm Maximum over 0°C to +70°C
E=±25ppm Maximum over 0°C to +70°C
F=±20ppm Maximum over 0°C to +70°C
G=±100ppm Maximum over -40°C to +85°C
H=±50ppm Maximum over -40°C to +85°C
J=±25ppm Maximum over -40°C to +85°C
K=±20ppm Maximum over -40°C to +85°C
FREQUENCY
OUTPUT CONTROL FUNCTION
H=Tri-State
DUTY CYCLE
1=50 ±10(%)
2=50 ±5(%)
OBSOLETE
MECHANICAL DIMENSIONS
SUGGESTED SOLDER PAD LAYOUT
ALL DIMENSIONS IN MILLIMETERS
ALL DIMENSIONS IN MILLIMETERS
Pin 1: Tri-State
Pin 2: Case Ground
TAPE AND REEL DIMENSIONS
Pin 3: Output
Pin 4: Supply Voltage
Tolerances = ±0.1
ALL DIMENSIONS IN MILLIMETERS
TAPE
F
8.0±0.1
A
B
C
D
E
12.0±0.2
5.5±0.1
6.5±0.1
4.0±0.1
2.0±0.1
G
H
B0* 1.5 +0.1-0.0
F
M
N
1.5 MIN
50 MIN
REEL
O
P
20.2 MIN 13.0±0.2
J
K
L
R
S
T
U
V
A0*
0.30 ±0.05
K0*
2.5 MIN
10 MIN
18.4 MAX
180 MAX
12.4+2-0
Q
40 MIN
QTY/REEL
1,000
*Compliant to EIA 481A
MARKING SPECIFICATIONS
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
Characteristic
Specification
Fine Leak Test
Gross Leak Test
Mechanical Shock
Vibration
Solderability
Temperature Cycling
Resistance to Soldering Heat
Resistance to Solvents
MIL-STD-883, Method 1014, Condition A
MIL-STD-883, Method 1014, Condition C
MIL-STD-202, Method 213, Condition C
MIL-STD-883, Method 2007, Condition A
MIL-STD-883, Method 2002
MIL-STD-883, Method 1010
MIL-STD-202, Method 210
MIL-STD-202, Method 215
Line 1: E XX.XXX
Frequency in MHz (5 Digits Maximum + Decimal)
Line 2: XX Y ZZ
Week of Year
Last Digit of Year
Ecliptek Manufacturing Identifier
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
REV.DATE
ECLIPTEK CORP.
OSCILLATOR
EB13D1
CERAMIC
3.3V
OS2U
12/03
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
Similar pages