ONSEMI DA121TT1G

DA121TT1G
Silicon Switching Diode
Features
 These Devices are Pb--Free, Halogen Free/BFR Free and are RoHS
Compliant
http://onsemi.com
MAXIMUM RATINGS (TA = 25C)
Rating
Symbol
Max
Unit
Continuous Reverse Voltage
VR
80
V
Recurrent Peak Forward Current
IF
200
mA
IFM(surge)
500
mA
Symbol
Max
Unit
Peak Forward Surge Current
Pulse Width = 10 ms
3
CATHODE
3
THERMAL CHARACTERISTICS
Characteristic
Total Device Dissipation,
FR--4 Board (Note 1)
TA = 25C
Derated above 25C
Thermal Resistance,
Junction--to--Ambient (Note 1)
Total Device Dissipation,
FR--4 Board (Note 2)
TA = 25C
Derated above 25C
Thermal Resistance,
Junction--to--Ambient (Note 2)
Junction and Storage Temperature
Range
PD
225
mW
1.8
mW/C
555
C/W
360
mW
2.9
mW/C
RθJA
345
C/W
TJ, Tstg
--55 to +150
C
RθJA
PD
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1. FR--4 @ Minimum Pad
2. FR--4 @ 1.0  1.0 Inch Pad
1
ANODE
1
2
SOT--416 / SC--75
CASE 463
STYLE 2
MARKING DIAGRAM
6A M G
G
1
6A
= Specific Device Code
M
= Date Code*
G
= Pb--Free Package
(Note: Microdot may be in either location)
*Date Code orientation and/or orientation may
vary depending upon manufacturing location.
ORDERING INFORMATION
Device
DA121TT1G
Package
Shipping†
SOT--416
(Pb--Free)
3000 / Tape & Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
 Semiconductor Components Industries, LLC, 2010
October, 2010 -- Rev. 3
1
Publication Order Number:
DA121TT1/D
DA121TT1G
ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted)
Symbol
Min
Max
-----
715
866
1000
1250
----
1.0
50
30
CD
--
2.0
pF
trr
--
6.0
ns
Stored Charge -- (IF = 10 mA to VR = 6.0 V, RL = 500 Ω) (Figure 2)
QS
--
45
PC
Forward Recovery Voltage -- (IF = 10 mA, tr = 20 ns) (Figure 3)
VFR
--
1.75
V
Characteristic
Forward Voltage -(IF = 1.0 mA)
(IF = 10 mA)
(IF = 50 mA)
(IF = 150 mA)
VF
Reverse Current -(VR = 75 V)
(VR = 75 V, TJ = 150C)
(VR = 25 V, TJ = 150C)
IR
Capacitance -- (VR = 0, f = 1.0 MHz)
Reverse Recovery Time -- (IF = IR = 10 mA, RL = 50 Ω) (Figure 1)
1 ns MAX
mV
mA
DUT
500 Ω
t
10%
Unit
trr
tif
50 Ω
DUTY CYCLE = 2%
90%
VF
Irr
100 ns
Figure 1. Reverse Recovery Time Equivalent Test Circuit
VC
500 Ω
DUT
VCM
20 ns MAX
D1
t
10%
VCM =
Qa
C
243 pF
100 KΩ
DUTY CYCLE = 2%
OSCILLOSCOPE
R  10 MΩ
C  7 pF
t
90%
Vf
BAW62
400 ns
Figure 2. Recovery Charge Equivalent Test Circuit
V
120 ns
V
1 KΩ
450 Ω
90%
DUT
Vfr
t
10%
DUTY CYCLE = 2%
2 ns MAX
Figure 3. Forward Recovery Voltage Equivalent Test Circuit
http://onsemi.com
2
50 Ω
DA121TT1G
10
IR , REVERSE CURRENT (A)
IF, FORWARD CURRENT (mA)
100
10
TA = 85C
TA = 25C
1.0
TA = -- 40C
0.1
0.2
0.4
0.6
0.8
1.0
VF, FORWARD VOLTAGE (VOLTS)
TA = 125C
1.0
TA = 85C
0.1
TA = 55C
0.01
0.001
1.2
TA = 150C
TA = 25C
0
10
Figure 4. Forward Voltage
20
30
40
VR, REVERSE VOLTAGE (VOLTS)
50
Figure 5. Leakage Current
CD , DIODE CAPACITANCE (pF)
0.68
0.64
0.60
0.56
0.52
0
2
4
6
VR, REVERSE VOLTAGE (VOLTS)
8
r(t), NORMALIZED TRANSIENT THERMAL RESISTANCE
Figure 6. Capacitance
1.0
0.1
D = 0.5
0.2
0.1
0.05
0.02
0.01
0.01
SINGLE PULSE
0.001
0.00001
0.0001
0.001
0.01
0.1
t, TIME (s)
1.0
Figure 7. Normalized Thermal Response
http://onsemi.com
3
10
100
1000
DA121TT1G
PACKAGE DIMENSIONS
SC--75 (SOT--416)
CASE 463--01
ISSUE F
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
--E-2
3
b 3 PL
0.20 (0.008)
e
DIM
A
A1
b
C
D
E
e
L
HE
--D--
1
M
D
0.20 (0.008) E
HE
C
INCHES
NOM MAX
0.031 0.035
0.002 0.004
0.008 0.012
0.006 0.010
0.063 0.067
0.031 0.035
0.04 BSC
0.004 0.006 0.008
0.061 0.063 0.065
MIN
0.027
0.000
0.006
0.004
0.059
0.027
STYLE 2:
PIN 1. ANODE
2. N/C
3. CATHODE
A
L
MILLIMETERS
MIN
NOM MAX
0.70
0.80
0.90
0.00
0.05
0.10
0.15
0.20
0.30
0.10
0.15
0.25
1.55
1.60
1.65
0.70
0.80
0.90
1.00 BSC
0.10
0.15
0.20
1.50
1.60
1.70
A1
SOLDERING FOOTPRINT*
0.356
0.014
1.803
0.071
0.787
0.031
0.508
0.020
1.000
0.039
SCALE 10:1
mm 
inches
*For additional information on our Pb--Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent
rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other
applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur.
Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries,
affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury
or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an
Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303--675--2175 or 800--344--3860 Toll Free USA/Canada
Fax: 303--675--2176 or 800--344--3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800--282--9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81--3--5773--3850
http://onsemi.com
4
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
DA121TT1/D