1PMT5.0AT1/T3 Series Zener Transient Voltage Suppressor POWERMITE® Package The 1PMT5.0AT1/T3 Series is designed to protect voltage sensitive components from high voltage, high energy transients. Excellent clamping capability, high surge capability, low Zener impedance and fast response time. The advanced packaging technique provides for a highly efficient micro miniature, space saving surface mount with its unique heatsink design. The POWERMITE has the same thermal performance as the SMA while being 50% smaller in footprint area, and delivering one of the lowest height profiles (1.1 mm) in the industry. Because of its small size, it is ideal for use in cellular phones, portable devices, business machines, power supplies and many other industrial/consumer applications. http://onsemi.com PLASTIC SURFACE MOUNT ZENER OVERVOLTAGE TRANSIENT SUPPRESSOR 5 − 58 V 200 W PEAK POWER 1 2 1: CATHODE 2: ANODE Specification Features: • Stand−off Voltage: 5.0 V − 58 V • Peak Power − 200 W @ 1 ms (1PMT5.0A − 1PMT36A) • • • • • • • • • • • • − 175 W @ 1 ms (1PMT40A − 1PMT58A) Maximum Clamp Voltage @ Peak Pulse Current Low Leakage Response Time is Typically < 1 ns ESD Rating of Class 3 (> 16 kV) per Human Body Model Low Profile − Maximum Height of 1.1 mm Integral Heatsink/Locking Tabs Full Metallic Bottom Eliminates Flux Entrapment Small Footprint − Footprint Area of 8.45 mm2 POWERMITE is JEDEC Registered as DO−216AA Lead Orientation in Tape: Cathode (Short) Lead to Sprocket Holes Cathode Indicated by Polarity Band Pb−Free Packages are Available 1 POWERMITE CASE 457 PLASTIC 2 MARKING DIAGRAM 1 CATHODE M Mxx Mechanical Characteristics: G CASE: Void-free, transfer-molded, thermosetting plastic FINISH: All external surfaces are corrosion resistant and leads are M MxxG 2 ANODE = Date Code = Specific Device Code (See Table on Page 3) = Pb−Free Package ORDERING INFORMATION readily solderable MOUNTING POSITION: Any MAXIMUM CASE TEMPERATURE FOR SOLDERING PURPOSES: 260°C for 10 Seconds Device Package Shipping † 1PMTxxAT1 POWERMITE 3,000/Tape & Reel 1PMTxxAT1G POWERMITE (Pb−Free) 3,000/Tape & Reel 1PMTxxAT3 POWERMITE 12,000/Tape & Reel 1PMTxxAT3G POWERMITE 12,000/Tape & Reel (Pb−Free) †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. © Semiconductor Components Industries, LLC, 2005 July, 2005 − Rev. 9 1 Publication Order Number: 1PMT5.0AT3/D 1PMT5.0AT1/T3 Series MAXIMUM RATINGS Symbol Value Unit Maximum Ppk Dissipation, (PW−10/1000 ms) (Note 1) (1PMT5.0A − 1PMT36A) Rating Ppk 200 W Maximum Ppk Dissipation, (PW−10/1000 ms) (Note 1) (1PMT40A − 1PMT58A) Ppk 175 W Maximum Ppk Dissipation, (PW−8/20 ms) (Note 1) Ppk 1000 W °PD° 500 4.0 248 °mW mW/°C °C/W DC Power Dissipation @ TA = 25°C (Note 2) Derate above 25°C Thermal Resistance, Junction−to−Ambient RqJA Thermal Resistance, Junction−to−Lead (Anode) RqJanode 35 °C/W Maximum DC Power Dissipation (Note 3) Thermal Resistance, Junction−to−Tab (Cathode) °PD° RqJcathode 3.2 23 W °C/W TJ, Tstg −55 to +150 °C Operating and Storage Temperature Range Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1. Nonrepetitive current pulse at TA = 25°C. 2. Mounted with recommended minimum pad size, DC board FR−4. 3. At Tab (Cathode) temperature, Ttab = 75°C ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted, VF = 3.5 V Max. @ IF (Note 4) = 35 A) Symbol Maximum Reverse Peak Pulse Current VC Clamping Voltage @ IPP IR VBR IF Parameter IPP VRWM I VC VBR VRWM Working Peak Reverse Voltage IR VF IT Maximum Reverse Leakage Current @ VRWM Breakdown Voltage @ IT IT Test Current IF Forward Current VF Forward Voltage @ IF IPP Uni−Directional TVS http://onsemi.com 2 V 1PMT5.0AT1/T3 Series ELECTRICAL CHARACTERISTICS (TL = 30°C unless otherwise noted, VF = 1.25 Volts @ 200 mA) VRWM VBR @ IT (V) (Note 6) IT IR @ VRWM VC @ IPP IPP (A) Device* Marking (Note 5) Min Nom Max (mA) (mA) (V) (Note 7) 1PMT5.0AT1, T3, G MKE 5.0 6.4 6.7 7.0 10 50 9.2 21.7 1PMT7.0AT1, T3, G MKM 7.0 7.78 8.2 8.6 10 30 12 16.7 1PMT12AT1, T3, G MLE 12 13.3 14.0 14.7 1.0 1.0 19.9 10.1 1PMT16AT1, T3, G MLP 16 17.8 18.75 19.7 1.0 1.0 26 7.7 1PMT18AT1, T3 MLT 18 20.0 21.0 22.1 1.0 1.0 29.2 6.8 1PMT22AT1, T3 MLX 22 24.4 25.6 26.9 1.0 1.0 35.5 5.6 1PMT24AT1, T3 MLZ 24 26.7 28.1 29.5 1.0 1.0 38.9 5.1 1PMT26AT1, T3 MME 26 28.9 30.4 31.9 1.0 1.0 42.1 4.8 1PMT28AT1, T3, G MMG 28 31.1 32.8 34.4 1.0 1.0 45.4 4.4 1PMT30AT1, T3, G MMK 30 33.3 35.1 36.8 1.0 1.0 48.4 4.1 1PMT33AT1, T3, G MMM 33 36.7 38.7 40.6 1.0 1.0 53.3 3.8 1PMT36AT1, T3 MMP 36 40.0 42.1 44.2 1.0 1.0 58.1 3.4 1PMT40AT1, T3 MMR 40 44.4 46.8 49.1 1.0 1.0 64.5 2.7 1PMT48AT1, T3 MMX 48 53.3 56.1 58.9 1.0 1.0 77.4 2.3 1PMT51AT1, T3 MMZ 51 56.7 59.7 62.7 1.0 1.0 82.4 2.1 1PMT58AT1, T3 MNG 58 64.4 67.8 71.2 1.0 1.0 93.6 1.9 4. 1/2 sine wave (or equivalent square wave), PW = 8.3 ms, duty cycle = 4 pulses per minute maximum. 5. A transient suppressor is normally selected according to the Working Peak Reverse Voltage (VRWM) which should be equal to or greater than the DC or continuous peak operating voltage level. 6. VBR measured at pulse test current IT at ambient temperature of 25°C. 7. Surge current waveform per Figure 2 and derate per Figure 4. *The “G’’ suffix indicates Pb−Free package available. http://onsemi.com 3 1PMT5.0AT1/T3 Series TYPICAL PROTECTION CIRCUIT Zin LOAD Vin VL 10,000 PULSE WIDTH (tP) IS DEFINED AS THAT POINT WHERE THE PEAK CURRENT DECAYS TO 50% OF IRSM. 100 1000 PEAK VALUE − IRSM VALUE (%) PP, PEAK POWER (WATTS) tr I HALF VALUE − RSM 2 50 100 tr≤ 10 ms tP 100 10 tr 90 % OF PEAK PULSE CURRENT 1.0 1000 100 3 4 Figure 2. 10 X 1000 ms Pulse Waveform 160 PEAK VALUE IRSM @ 8 ms 60 HALF VALUE IRSM/2 @ 20 ms 50 40 tP 10 0 2 Figure 1. Pulse Rating Curve 70 0 1 t, TIME (ms) PULSE WIDTH (tP) IS DEFINED AS THAT POINT WHERE THE PEAK CURRENT DECAY = 8 ms 20 0 tP, PULSE WIDTH (ms) 80 30 0 10,000 PEAK PULSE DERATING IN % OF PEAK POWER OR CURRENT @ TA = 25° C 10 20 40 60 140 120 100 80 60 40 20 0 80 0 25 50 75 100 125 TA, AMBIENT TEMPERATURE (°C) t, TIME (ms) Figure 3. 8 X 20 ms Pulse Waveform Figure 4. Pulse Derating Curve http://onsemi.com 4 150 P D , MAXIMUM POWER DISSIPATION (W) 1PMT5.0AT1/T3 Series 1 0.7 DERATING FACTOR 0.5 0.3 0.2 PULSE WIDTH 10 ms 0.1 0.07 0.05 1 ms 0.03 100 ms 0.02 10 ms 0.01 0.1 0.2 0.5 1 2 5 10 20 50 100 3.5 3 2.5 2 TL 1.5 1 0.5 0 25 D, DUTY CYCLE (%) 75 100 125 150 175 T, TEMPERATURE (°C) Figure 5. Typical Derating Factor for Duty Cycle Figure 6. Steady State Power Derating 10,000 1.2 1.0 C, CAPACITANCE (pF) V F, TYPICAL FORWARD VOLTAGE (VOLTS) 50 0.8 0.6 0.4 1000 MEASURED @ ZERO BIAS MEASURED @ 50% VRWM 100 0.2 10 0 −55 25 85 150 1 T, TEMPERATURE (°C) 10 WORKING PEAK REVERSE VOLTAGE (VOLTS) Figure 7. Forward Voltage Figure 8. Capacitance versus Working Peak Reverse Voltage http://onsemi.com 5 100 1PMT5.0AT1/T3 Series OUTLINE DIMENSIONS POWERMITE CASE 457−04 ISSUE D F 0.08 (0.003) C −A− J T B M S C S S NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSION A DOES NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS. MOLD FLASH, PROTRUSIONS OR GATE BURRS SHALL NOT EXCEED 0.15 (0.006) PER SIDE. DIM A B C D F H J K L R S TERM. 1 −B− K TERM. 2 R L J MILLIMETERS INCHES MIN MAX MIN MAX 1.75 2.05 0.069 0.081 1.75 2.18 0.069 0.086 0.85 1.15 0.033 0.045 0.40 0.69 0.016 0.027 0.70 1.00 0.028 0.039 −0.05 +0.10 −0.002 +0.004 0.10 0.25 0.004 0.010 3.60 3.90 0.142 0.154 0.50 0.80 0.020 0.031 1.20 1.50 0.047 0.059 0.50 REF 0.019 REF D H −T− 0.08 (0.003) M T B S C S SOLDERING FOOTPRINT* 0.635 0.025 2.67 0.105 0.762 0.030 2.54 0.100 1.27 0.050 SCALE 10:1 mm Ǔ ǒinches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. POWERMITE is a registered trademark of and used under a license from Microsemi Corporation. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: N. American Technical Support: 800−282−9855 Toll Free Literature Distribution Center for ON Semiconductor USA/Canada P.O. Box 61312, Phoenix, Arizona 85082−1312 USA Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada Phone: 81−3−5773−3850 Email: [email protected] http://onsemi.com 6 ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. 1PMT5.0AT3/D