GOOD-ARK ES2A Surface mount glass passivated superfast rectifier Datasheet

ES2A thru ES2J
Surface Mount Glass Passivated Superfast Rectifier
Reverse Voltage 50 to 600V Forward Current 2A
Features
• Glass passivated superfast recovery Rectifiers
• Low leakage current
• Moisture sensitivity: level 1, per J-STD-020
• Solder dip 260 °C, 10 s
• Plastic package has Underwriters Laboratory Flammability
Classification 94V-0
DO-214AA SMB
Typical Applications
For use of general purpose rectification in lighting, cellular phone, portable device,
power supplies and other consumer applications.
Maximum Ratings
(TA = 25 °C unless otherwise noted)
Parameter
Symbol
ES2A
ES2B
ES2C
ES2D
ES2F
ES2G
ES2J
Unit
Maximum repetitive peak reverse voltage
VRRM
50
100
150
200
300
400
600
V
Maximum RMS voltage
VRMS
35
70
105
140
210
280
420
V
Maximum DC blocking voltage
VDC
50
100
150
200
300
400
600
Maximum average output rectified current
IF(AV)
2.0
A
Peak forward surge current 8.3 ms single
half sine-wave superimposed on rated load
IFSM
50
A
It
2
10.0
A2sec
TJ, TSTG
-55 to +150
°C
Rating for fusing(t<8.3ms)
Operating junction and storage temperature
range
Electrical Characteristics
Parameter
Maximum instantaneous
forward voltage
Maximum DC reverse
current at rated DC
blocking voltage
Test
Conditions
IF=2.0A
TA=25
(TA = 25 °C unless otherwise noted)
Symbol
ES2A
ES2B
VF
TA=25
V
ES2C
ES2D
ES2F
0.95
ES2G
1.3
ES2J
Unit
1.7
Volts
10.0
IR
µA
TA=100
100
Maximum reverse recovery IF=0.5A,IR=1.0A,
time
IRR=0.25A
trr
Typical junction
capacitance
CJ
4.0 V, 1 MHz
35
nS
25
20
pF
Thermal Characteristics
Parameter
Typical thermal resistance(1)
Symbol
ES2A
ES2B
ES2C
ES2D
R
JA
75
R
Jl
25
ES2F
ES2G
ES2J
Unit
/W
Notes:1. The thermal resistance from junction to ambient,case or mount,mounted on P.C.B with 5×5mm copper pads,2 OZ,FR4 PCB
www.goodark.com
1/5
2015.08-Rev.B
ES2A thru ES2J
Surface Mount Glass Passivated Superfast Rectifier
Reverse Voltage 50 to 600V Forward Current 2A
Ratings and Characteristics Curves
(TA = 25
unless otherwise noted)
www.goodark.com
2/5
2015.08-Rev.B
ES2A thru ES2J
Surface Mount Glass Passivated Superfast Rectifier
Reverse Voltage 50 to 600V Forward Current 2A
Package Outline Dimensions
Packing Information
3000 pcs/Reel, 18 Reels/Box; 12mm Tape, 13" Reel
Tape & Reel Specification
www.goodark.com
Symbo
SMB(mm)
W
E
F
D0
D1
P0
P1
P2
A0
B0
12±0.2
1.75±0.1
5.5±0.05
1.5±0.1
1.50 +0.1/-0
4.0±0.1
8.0±0.1
2.0±0.05
3.95±0.1
5.74±0.1
3/5
2015.08-Rev.B
ES2A thru ES2J
Surface Mount Glass Passivated Superfast Rectifier
Reverse Voltage 50 to 600V Forward Current 2A
Soldering Parameters
Reflow Soldering
- Temperature Min
Pre Heat
- Temperature Max
- Time (min to max) (ts)
Average ramp up rate (Liquidus Temp (TL) to peak
TS(max) to TL - Ramp-up Rate
- Temperature (TL)
Reflow
- Time (min to max) (ts)
Peak Temperature (TP)
Time within 5°C of actual peak Temperature (tp)
Ramp-down Rate
Time 25°C to peak Temperature (TP)
Do not exceed
Wave Soldering
Peak Temperature :
Dipping Time :
Soldering :
www.goodark.com
Sn-Pb Eutectic Assembly
100°C
150°C
60 – 120 secs
3°C/second max
3°C/second max
183°C
60 – 150 seconds
240+0/-5 °C
10 –30 seconds
6°C/second max
6 minutes Max.
260°C
Pb-Free assembly
150°C
200°C
60 – 180 secs
3°C/second max
3°C/second max
217°C
60 – 150 seconds
240+0/-5°C
20 – 40 seconds
6°C/second max
8 minutes Max.
260°C
260+0/-5°C
10 seconds
1 time
4/5
2015.08-Rev.B
ES2A thru ES2J
Surface Mount Glass Passivated Superfast Rectifier
Reverse Voltage 50 to 600V Forward Current 2A
Disclaimers
These materials are intended as a reference to assist our customers in the selection of the Suzhou Good-Ark
product best suited to the customer ’ s application; they do not convey any license under any intellectual
property rights, or any other rights, belonging to Suzhou Good-Ark Electronics Co., Ltd.or a third party.
Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of any
third-party ’s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or
circuit application examples contained in these materials.
All information contained in these materials, including product data, diagrams, charts, programs and
algorithms represents information on products at the time of publication of these materials, and are subject
to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements or other
reasons. It is therefore recommended that customers contact Suzhou Good-Ark Electronics Co., Ltd. or an
authorized Suzhou Good-Ark Electronics Co., Ltd. for the latest product information before purchasing a
product listed herein. The information described here may contain technical inaccuracies or typographical
errors. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability, or other
loss rising from these inaccuracies or errors. Please also pay attention to information published by Suzhou
Good-Ark Electronics Co., Ltd. by various means, including our website home page.
(http://www.goodark.com)
When using any or all of the information contained in these materials, including product data, diagrams,
charts, programs, and algorithms, Please be sure to evaluate all information as a total system before making
a final decision on the applicability of the information and products. Suzhou Good-Ark Electronics Co., Ltd.
assumes no responsibility for any damage, liability or other loss resulting from the information contained
herein.
The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or reproduce in
whole or in part these materials.
Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on
these materials or the products contained herein.
www.goodark.com
5/5
2015.08-Rev.B
Similar pages