Renesas HD74HC534RPEL Octal d-type flip-flops (with 3-state outputs) Datasheet

To our customers,
Old Company Name in Catalogs and Other Documents
On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology
Corporation, and Renesas Electronics Corporation took over all the business of both
companies. Therefore, although the old company name remains in this document, it is a valid
Renesas Electronics document. We appreciate your understanding.
Renesas Electronics website: http://www.renesas.com
April 1st, 2010
Renesas Electronics Corporation
Issued by: Renesas Electronics Corporation (http://www.renesas.com)
Send any inquiries to http://www.renesas.com/inquiry.
Notice
1.
2.
3.
4.
5.
6.
7.
All information included in this document is current as of the date this document is issued. Such information, however, is
subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please
confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to
additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.
Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights
of third parties by or arising from the use of Renesas Electronics products or technical information described in this document.
No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights
of Renesas Electronics or others.
You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.
Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of
semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software,
and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by
you or third parties arising from the use of these circuits, software, or information.
When exporting the products or technology described in this document, you should comply with the applicable export control
laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas
Electronics products or the technology described in this document for any purpose relating to military applications or use by
the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and
technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations.
Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics
does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages
incurred by you resulting from errors in or omissions from the information included herein.
Renesas Electronics products are classified according to the following three quality grades: “Standard”, “High Quality”, and
“Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as
indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior
written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for
which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way
liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an
application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written
consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise
expressly specified in a Renesas Electronics data sheets or data books, etc.
“Standard”:
8.
9.
10.
11.
12.
Computers; office equipment; communications equipment; test and measurement equipment; audio and visual
equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots.
“High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anticrime systems; safety equipment; and medical equipment not specifically designed for life support.
“Specific”:
Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or
systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare
intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life.
You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics,
especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation
characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or
damages arising out of the use of Renesas Electronics products beyond such specified ranges.
Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have
specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further,
Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to
guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a
Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire
control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because
the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system
manufactured by you.
Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental
compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable
laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS
Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with
applicable laws and regulations.
This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas
Electronics.
Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this
document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majorityowned subsidiaries.
(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
HD74HC374, HD74HC534
Octal D-type Flip-Flops (with 3-state outputs)
Octal D-type Flip-Flops (with inverted 3-state outputs)
REJ03D0620-0200
(Previous ADE-205-499)
Rev.2.00
Mar 30, 2006
Description
These devices are positive edge triggered flip-flops. The difference between HD74HC374 and HD74HC534 is only
that the former is a true outputs and the latter is a false outputs. Data at the D inputs, meeting the setup and hold time
requirements, are transferred to the Q outputs on positive going transitions of the clock (CK) input. When a high logic
level is applied to the output control (OC) input, all outputs go to a high impedance state, regardless of what signals are
present at the other inputs and the state of the storage elements.
Features
• High Speed Operation: tpd (Clock to Q) = 18 ns typ (CL = 50 pF)
• High Output Current: Fanout of 15 LSTTL Loads
• Wide Operating Voltage: VCC = 2 to 6 V
• Low Input Current: 1 µA max
• Low Quiescent Supply Current: ICC (static) = 4 µA max (Ta = 25°C)
• Ordering Information
Part Name
HD74HC374P
HD74HC534P
HD74HC374FPEL
HD74HC534FPEL
Package Type
DILP-20 pin
SOP-20 pin (JEITA)
Package Code
(Previous Code)
PRDP0020AC-B
(DP-20NEV)
PRSP0020DD-B
(FP-20DAV)
Package
Abbreviation
P
—
FP
EL (2,000 pcs/reel)
PRSP0020DC-A
RP
(FP-20DBV)
PTSP0020JB-A
HD74HC374TELL
TSSOP-20 pin
T
(TTP-20DAV)
Note: Please consult the sales office for the above package availability.
HD74HC534RPEL
Taping Abbreviation
(Quantity)
EL (1,000 pcs/reel)
SOP-20 pin (JEDEC)
ELL (2,000 pcs/reel)
Function Table
Output Control
L
L
L
Note:
Clock
L
D
H
HD74HC374
Q
H
HD74HC534
Q
L
L
X
L
No change
H
No change
Z
Z
H
X
X
1. H; High level, L; Low level, X; Irrelevant, Z; High impedance
Rev.2.00 Mar 30, 2006 page 1 of 8
HD74HC374, HD74HC534
Pin Arrangement
HD74HC374
Output
Control 1
20 VCC
1Q 2
19 8Q
1D 3
18 8D
2D 4
17 7D
2Q 5
16 7Q
3Q 6
15 6Q
3D 7
14 6D
4D 8
13 5D
4Q 9
12 5Q
GND 10
11 Clock
(Top view)
HD74HC534
Output
Control 1
20 VCC
1Q 2
19 8Q
1D 3
18 8D
2D 4
17 7D
2Q 5
16 7Q
3Q 6
15 6Q
3D 7
14 6D
4D 8
13 5D
4Q 9
12 5Q
GND 10
11 Clock
(Top view)
Rev.2.00 Mar 30, 2006 page 2 of 8
HD74HC374, HD74HC534
Logic Diagram
HD74HC374
1D
2D
3D
4D
5D
6D
7D
8D
D Q
D Q
D Q
D Q
D Q
D Q
D Q
D Q
C Q
C Q
C Q
C Q
C Q
C Q
C Q
C Q
Clock
Output
Control
1Q
2Q
3Q
4Q
2D
3D
4D
5D
5Q
6Q
7Q
8Q
HD74HC534
1D
6D
7D
8D
D Q
D Q
D Q
D Q
D Q
D Q
D Q
D Q
C Q
C Q
C Q
C Q
C Q
C Q
C Q
C Q
Clock
Output
Control
1Q
2Q
3Q
4Q
5Q
6Q
7Q
8Q
Absolute Maximum Ratings
Item
Supply voltage range
Symbol
VCC
Ratings
–0.5 to 7.0
Unit
V
Input / Output voltage
Input / Output diode current
VIN, VOUT
IIK, IOK
–0.5 to VCC +0.5
±20
V
mA
Output current
VCC, GND current
IOUT
ICC or IGND
±35
±75
mA
mA
PT
Tstg
500
–65 to +150
mW
°C
Power dissipation
Storage temperature
Note: The absolute maximum ratings are values, which must not individually be exceeded, and furthermore, no two of
which may be realized at the same time.
Rev.2.00 Mar 30, 2006 page 3 of 8
HD74HC374, HD74HC534
Recommended Operating Conditions
Item
Symbol
Ratings
Unit
Supply voltage
Input / Output voltage
VCC
VIN, VOUT
2 to 6
0 to VCC
V
V
Operating temperature
Ta
–40 to 85
0 to 1000
°C
tr , tf
0 to 500
0 to 400
ns
Input rise / fall time
Note:
*1
Conditions
VCC = 2.0 V
VCC = 4.5 V
VCC = 6.0 V
1. This item guarantees maximum limit when one input switches.
Waveform: Refer to test circuit of switching characteristics.
Electrical Characteristics
Ta = 25°C
Item
Input voltage
Symbol VCC (V)
VIH
VIL
Output voltage
VOH
VOL
Ta = –40 to+85°C
Unit
Test Conditions
2.0
Min
1.5
Typ
—
Max
—
Min
1.5
Max
—
4.5
6.0
3.15
4.2
—
—
—
—
3.15
4.2
—
—
2.0
4.5
—
—
—
—
0.5
1.35
—
—
0.5
1.35
6.0
2.0
—
1.9
—
2.0
1.8
—
—
1.9
1.8
—
4.5
6.0
4.4
5.9
4.5
6.0
—
—
4.4
5.9
—
—
4.5
6.0
4.18
5.68
—
—
—
—
4.13
5.63
—
—
2.0
4.5
—
—
0.0
0.0
0.1
0.1
—
—
0.1
0.1
6.0
4.5
—
—
0.0
—
0.1
0.26
—
—
0.1
0.33
—
—
—
—
0.26
±0.5
—
—
0.33
±5.0
IOL = 7.8 mA
µA Vin = VIH or VIL,
Vout = VCC or GND
—
—
—
—
±0.1
4.0
—
—
±1.0
40
µA Vin = VCC or GND
µA Vin = VCC or GND, Iout = 0 µA
Off-state output
current
IOZ
6.0
6.0
Input current
Quiescent supply
current
Iin
ICC
6.0
6.0
Rev.2.00 Mar 30, 2006 page 4 of 8
V
V
V
Vin = VIH or VIL IOH = –20 µA
IOH = –6 mA
IOH = –7.8 mA
V
Vin = VIH or VIL IOL = 20 µA
IOL = 6 mA
HD74HC374, HD74HC534
Switching Characteristics (CL = 50 pF, Input tr = tf = 6 ns)
Ta = 25°C
Item
Symbol VCC (V)
2.0
Min
—
Typ
—
Max
6
Min
—
Max
5
4.5
6.0
—
—
—
—
30
35
—
—
24
28
tPHL
tPLH
2.0
4.5
—
—
—
18
140
28
—
—
175
35
tZL
6.0
2.0
—
—
—
—
24
150
—
—
30
190
4.5
6.0
—
—
11
—
30
26
—
—
38
33
2.0
4.5
—
—
—
14
150
30
—
—
190
38
6.0
2.0
—
—
—
—
26
150
—
—
33
190
4.5
6.0
—
—
13
—
30
26
—
—
38
33
2.0
4.5
—
—
—
16
150
30
—
—
190
38
6.0
2.0
—
100
—
—
26
—
—
125
33
—
4.5
6.0
20
17
1
—
—
—
25
21
—
—
2.0
4.5
25
5
—
1
—
—
31
6
—
—
6.0
2.0
5
80
—
—
—
—
6
100
—
—
4.5
6.0
16
14
6
—
—
—
20
17
—
—
Maximum clock
frequency
fmax
Propagation delay
time
Output enable
time
tZH
Output disable
time
tLZ
tHZ
Setup time
Ta = –40 to +85°C
tsu
Hold time
th
Pulse width
tw
Output rise/fall
time
tTLH
tTHL
2.0
4.5
—
—
—
4
60
12
—
—
75
15
Input capacitance
Cin
6.0
—
—
—
—
5
10
10
—
—
13
10
Unit
Test Conditions
MHz
ns
ns
ns
ns
ns
ns
Data to Clock
ns
Clock to Data
ns
Clock or Output control
ns
pF
Test Circuit
VCC
VCC
Output
Pulse Generator
Zout = 50 Ω
Input
Pulse Generator
Zout = 50 Ω
OC
See Function Table
Input
1Q to 8Q
or
1Q to 8Q
S1
OPEN
GND
CL =
50 pF
VCC
1D to 8D
Clock
Note : 1. CL includes probe and jig capacitance.
Rev.2.00 Mar 30, 2006 page 5 of 8
1 kΩ
TEST
t PLH / t PHL
S1
OPEN
t ZH/ t HZ
t ZL / t LZ
GND
VCC
HD74HC374, HD74HC534
Waveforms
• Waveform – 1
tf
tr
VCC
90 % 90 %
50 %
Input CLK
50 %
10 %
tr
10 %
tf
VCC
90 %
90 %
Input D
0V
10 %
10 %
0V
t PHL
t PLH
Output Q
VOH
50 %
50 %
VOL
Output Q
• Waveform – 2
tf
tr
VCC
90 % 90 %
50 %
50 %
Input CLK
10 %
tw
tsu
50 %
10 %
tw
0V
th
VCC
Input D
50 %
50 %
0V
• Waveform – 3
Input OC
tf
tr
90 %
50 %
10 %
VCC
90 %
50 %
10 %
t LZ
t ZL
0V
VOH
50 %
Waveform - A
t ZH
Waveform - B
10 %
VOL
t HZ
50 %
90 %
VOH
VOL
Notes : 1. Input waveform : PRR ≤ 1 MHz, duty cycle 50%, tr ≤ 6 ns, tf ≤ 6 ns
2. Waveform - A is for an output with internal conditions such that the
output is low except when disabled by the output control.
3. Waveform - B is for an output with internal conditions such that the
output is high except when disabled by the output control.
4. The output are measured one at a time with one transition per measurement.
Rev.2.00 Mar 30, 2006 page 6 of 8
HD74HC374, HD74HC534
Package Dimensions
JEITA Package Code
P-DIP20-6.3x24.5-2.54
RENESAS Code
PRDP0020AC-B
Previous Code
DP-20NEV
MASS[Typ.]
1.26g
D
11
E
20
1
10
b3
0.89
A1
A
Z
Reference
Symbol
L
e1
D
E
A
A1
bp
b3
c
θ
e
Z
L
θ
bp
e
c
e1
( Ni/Pd/Au plating )
JEITA Package Code
P-SOP20-5.5x12.6-1.27
RENESAS Code
PRSP0020DD-B
*1
Previous Code
FP-20DAV
Min
Nom Max
7.62
24.50 25.40
6.30 7.00
5.08
0.51
0.40 0.48 0.56
1.30
0.19 0.25 0.31
0°
15°
2.29 2.54 2.79
1.27
2.54
MASS[Typ.]
0.31g
D
NOTE)
1. DIMENSIONS"*1 (Nom)"AND"*2"
DO NOT INCLUDE MOLD FLASH.
2. DIMENSION"*3"DOES NOT
INCLUDE TRIM OFFSET.
F
20
Dimension in Millimeters
11
c
HE
*2
E
bp
Index mark
Terminal cross section
( Ni/Pd/Au plating )
1
Z
10
e
*3
bp
x
Reference
Symbol
M
A
L1
A1
θ
y
L
Detail F
Rev.2.00 Mar 30, 2006 page 7 of 8
D
E
A2
A1
A
bp
b1
c
c1
θ
HE
e
x
y
Z
L
L1
Dimension in Millimeters
Min Nom Max
12.60 13.0
5.50
0.00 0.10 0.20
2.20
0.34 0.40 0.46
0.15 0.20 0.25
0°
8°
7.50 7.80 8.00
1.27
0.12
0.15
0.80
0.50 0.70 0.90
1.15
HD74HC374, HD74HC534
JEITA Package Code
P-SOP20-7.5x12.8-1.27
RENESAS Code
PRSP0020DC-A
*1
Previous Code
FP-20DBV
MASS[Typ.]
0.52g
D
F
20
NOTE)
1. DIMENSIONS"*1 (Nom)"AND"*2"
@ DO NOT INCLUDE MOLD FLASH.
2. DIMENSION"*3"DOES NOT
@ INCLUDE TRIM OFFSET.
11
c
*2
E
HE
bp
Index mark
Terminal cross section
( Ni/Pd/Au plating )
1
Reference
Symbol
10
e
*3
bp
x
M
L1
A
Z
A1
θ
L
y
Detail F
JEITA Package Code
P-TSSOP20-4.4x6.5-0.65
RENESAS Code
PTSP0020JB-A
*1
Previous Code
TTP-20DAV
D
E
A2
A1
A
bp
b1
c
c1
θ
HE
e
x
y
Z
L
L1
Dimension in Millimeters
Min Nom Max
12.80 13.2
7.50
0.10 0.20 0.30
2.65
0.34 0.40 0.46
0.20 0.25 0.30
0°
8°
10.00 10.40 10.65
1.27
0.12
0.15
0.935
0.40 0.70 1.27
1.45
MASS[Typ.]
0.07g
D
F
20
NOTE)
1. DIMENSIONS"*1 (Nom)"AND"*2"
DO NOT INCLUDE MOLD FLASH.
2. DIMENSION"*3"DOES NOT
INCLUDE TRIM OFFSET.
11
c
HE
*2
E
bp
Terminal cross section
( Ni/Pd/Au plating )
Index mark
Reference
Symbol
1
e
*3
bp
L1
x
M
A
Z
10
A1
θ
L
y
Detail F
Rev.2.00 Mar 30, 2006 page 8 of 8
D
E
A2
A1
A
bp
b1
c
c1
θ
HE
e
x
y
Z
L
L1
Dimension in Millimeters
Min Nom Max
6.50 6.80
4.40
0.03 0.07 0.10
1.10
0.15 0.20 0.25
0.10 0.15 0.20
0°
8°
6.20 6.40 6.60
0.65
0.13
0.10
0.65
0.4 0.5 0.6
1.0
Sales Strategic Planning Div.
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Keep safety first in your circuit designs!
1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble
may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage.
Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary
circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap.
Notes regarding these materials
1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's
application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party.
2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data,
diagrams, charts, programs, algorithms, or circuit application examples contained in these materials.
3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of
publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is
therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product
information before purchasing a product listed herein.
The information described here may contain technical inaccuracies or typographical errors.
Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors.
Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor
home page (http://www.renesas.com).
4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to
evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes
no responsibility for any damage, liability or other loss resulting from the information contained herein.
5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life
is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a
product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater
use.
6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials.
7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and
cannot be imported into a country other than the approved destination.
Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.
8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein.
http://www.renesas.com
RENESAS SALES OFFICES
Refer to "http://www.renesas.com/en/network" for the latest and detailed information.
Renesas Technology America, Inc.
450 Holger Way, San Jose, CA 95134-1368, U.S.A
Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501
Renesas Technology Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.
Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900
Renesas Technology (Shanghai) Co., Ltd.
Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120
Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7898
Renesas Technology Hong Kong Ltd.
7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong
Tel: <852> 2265-6688, Fax: <852> 2730-6071
Renesas Technology Taiwan Co., Ltd.
10th Floor, No.99, Fushing North Road, Taipei, Taiwan
Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999
Renesas Technology Singapore Pte. Ltd.
1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632
Tel: <65> 6213-0200, Fax: <65> 6278-8001
Renesas Technology Korea Co., Ltd.
Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea
Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145
Renesas Technology Malaysia Sdn. Bhd
Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia
Tel: <603> 7955-9390, Fax: <603> 7955-9510
© 2006. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon .6.0
Similar pages