EPCOS C61157-A7-A72 Saw rf low loss filter satellite css Datasheet

SAW Components
SAW RF low loss filter
Satellite CSS
Series/type:
Ordering code:
B1657
B39162-B1657-B510
Date:
Version:
September 15, 2009
2.0
 EPCOS AG 2009. Reproduction, publication and dissemination of this data sheet, enclosures
hereto and the information contained therein without EPCOS’ prior express consent is prohibited.
SAW Components
B1657
1586.36 MHz
SAW RF low loss filter
Data Sheet
Application
■ Low loss RF filter for satellite CSS
■ Usable passband 40.0 MHz
■ Balanced to balanced operation
Features
0.6
1
1.5
1.5
3
7
5
side view
top view
3.0
Pin configuration
■
■
■
■
■
■
1
2
5
6
3,7
4,8
Input
Input
Output
Output
To be grounded
Case ground
Please read cautions and warnings and
important notes at the end of this document.
2
bottom view
1.8
1.1
Package size 3.0 x 3.0 x 1.1 mm3
Maximum height of 1.225 mm
Package code QCC8F
RoHS compatible
Approximate weight 0.037 g
Package for Surface Mount Technology (SMT)
Ni, gold-plated terminals
Electrostatic Sensitive Device (ESD)
3.0
■
■
■
■
■
■
■
■
September 15, 2009
SAW Components
B1657
1586.36 MHz
SAW RF low loss filter
Data Sheet
Characteristics
Temperature range for specification:
Terminating source impedance:
Terminating load impedance:
T = –40 ˚C to +85 ˚C
ZS = 150 Ω (balanced) and matching network
ZL = 150 Ω (balanced) and matching network
min.
Nominal frequency
fN
—
typ.
@ 25 ˚C
1586.36
max.
—
MHz
Maximum insertion attenuation
αmax
1566.36 ... 1606.36 MHz
—
4.0
Pass bandwidth
αrel < 1.5 dB
—
58.0
Amplitude ripple (p-p)
∆α
1566.36 ... 1606.36 MHz
—
1.5
2.0
dB
Input return loss
8.0
11.0
—
dB
Output return loss
8.0
11.0
—
dB
Group delay ripple (p-p)
∆τ
1566.36 ... 1606.36 MHz
—
15.0
30.0
ns
Differential to common mode ratio
(|Sdd21/Scd21|)
1566.36 ... 1606.36 MHz
22.0
30.0
—
dB
Deviation from linear phase (rms)
in any 30 MHz band
1566.36 ... 1606.36 MHz
—
7.0
8.0
˚
Relative attenuation
50.00
1670.00
1700.00
3400.00
B1.5 dB
5.0
—
dB
MHz
α
...
...
...
...
1484.30
1700.00
3400.00
6000.00
MHz
MHz
MHz
MHz
Please read cautions and warnings and
important notes at the end of this document.
47.0
31.0
37.0
17.0
3
50.0
34.0
42.0
—
September 15, 2009
—
—
—
—
dB
dB
dB
dB
SAW Components
B1657
1586.36 MHz
SAW RF low loss filter
Data Sheet
Matching network (element values depend on PCB layout)
Lp1 = 47nH
Lp2 = 47nH
Lp1
Lp2
Maximum ratings
Operable temperature range T
Storage temperature range Tstg
DC voltage
ESD voltage
VDC
VESD
–40/+85
–40/+85
˚C
˚C
0
501)
V
V
machine model, 1 pulse
dBm
source impedance 150 Ω
Input power at
1566.36... 1606.36 MHz PIN
1)
0
acc. to JESD22-A115A (machine model), 1 negative & 1 positive pulse.
Transfer function
Please read cautions and warnings and
important notes at the end of this document.
4
September 15, 2009
SAW Components
B1657
1586.36 MHz
SAW RF low loss filter
Data Sheet
Transfer function (passband)
Please read cautions and warnings and
important notes at the end of this document.
5
September 15, 2009
SAW Components
B1657
1586.36 MHz
SAW RF low loss filter
Data Sheet
References
Type
B1657
Ordering code
B39162-B1657-B510
Marking and package
C61157-A7-A72
Packaging
F61074-V8168-Z000
Date codes
L_1126
S-parameters
B1657_NB.s4p
See file header for port/pin assignment table.
Soldering profile
S_6001
RoHS compatible
defined as compatible with the following documents:
"DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT
AND OF THE COUNCIL of 27 January 2003 on the restriction
of the use of certain hazardous substances in electrical and
electronic equipment. 2005/618/EC from April 18th, 2005,
amending Directive 2002/95/EC of the European Parliament
and of the Council for the purposes of establishing the maximum concentration values for certain hazardous substances in
electrical and electronic equipment."
For further information please contact your local EPCOS sales office or visit our webpage at
www.epcos.com .
Published by EPCOS AG
Surface Acoustic Wave Components Division
P.O. Box 80 17 09, 81617 Munich, GERMANY
 EPCOS AG 2009. This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
the type in question please also contact one of our Sales Offices.
Please read cautions and warnings and
important notes at the end of this document.
6
September 15, 2009
Important notes
The following applies to all products named in this publication:
1.
2.
3.
4.
5.
6.
7.
Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately
incumbent on the customer to check and decide whether an EPCOS product with the
properties described in the product specification is suitable for use in a particular customer
application.
We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained
by third parties in the event of malfunction or failure of an electronic component.
The warnings, cautions and product-specific notes must be observed.
In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be
available. The aforementioned does not apply in the case of individual agreements deviating
from the foregoing for customer-specific products.
Unless otherwise agreed in individual contracts, all orders are subject to the current
version of the “General Terms of Delivery for Products and Services in the Electrical
Industry” published by the German Electrical and Electronics Industry Association
(ZVEI).
The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DSSP, MiniBlue,
MiniCell, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap,
SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K,
ThermoFuse, WindCap are trademarks registered or pending in Europe and in other
countries. Further information will be found on the Internet at www.epcos.com/trademarks.
7
September 15, 2009
Similar pages