Kingbright ACPSC04-41PBWA/A Surface mount display Datasheet

SURFACE MOUNT DISPLAY
PRELIMINARY SPEC
Part Number: ACPSC04-41PBWA/A
BLUE
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Features
Description
0.4 INCH CHARACTER HEIGHT.
The Blue source color devices are made with InGaN on SiC
LOW CURRENT OPERATION.
Light Emitting Diode.
HIGH CONTRAST AND LIGHT OUTPUT.
Static electricity and surge damage the LEDS.
EASY MOUNTING ON P.C. BOARDS OR SOCKETS.
It is recommended to use a wrist band or anti-electrostatic
CATEGORIZED FOR LUMINOUS INTENSITY.
glove when handling the LEDs.
MECHANICALLY RUGGED.
All devices, equipment and machinery must be electrically
GRAY FACE,WHITE SEGMENT.
grounded.
PACKAGE : 400PCS / REEL.
MOISTURE SENSITIVITY LEVEL : LEVEL 4.
RoHS COMPLIANT.
Package Dimensions & Internal Circuit Diagram
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. Specifications are subject to change without notice.
3.The gap between the reflector and PCB shall not exceed 0.25mm
SPEC NO: DSAG1425
REV NO: V.2
DATE: MAY/30/2006
PAGE: 1 OF 5
APPROVED: J. Lu
CHECKED: Joe Lee
DRAWN: W.J.ZHU
ERP: 1361000047
Selection Guide
Part No.
Dice
ACPSC04-41PBWA/A
Iv (ucd) [1]
@ 10mA
Lens Type
BLUE (InGaN)
WHITE DIFFUSED
Min.
Typ.
800
2900
Description
Common Cathode, Rt.
Hand Decimal.
Note:
1.Luminous Intensity / Luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
λpeak
Peak Wavelength
Blue
λD [1]
Dominant Wavelength
∆λ1/2
Typ.
Max.
Units
Test Conditions
468
nm
IF=20mA
Blue
470
nm
IF=20mA
Spectral Line Half-width
Blue
21
nm
IF=20mA
C
Capacitance
Blue
100
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Blue
3.3
3.8
V
IF=20mA
IR
Reverse Current
Blue
10
uA
VR = 5V
Notes:
1.Wavelength: +/-1nm.
2.Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
Blue
Units
Power dissipation
114
mW
DC Forward Current
30
mA
Peak Forward Current [1]
100
mA
5
V
Reverse Voltage
Operating/Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAG1425
REV NO: V.2
DATE: MAY/30/2006
PAGE: 2 OF 5
APPROVED: J. Lu
CHECKED: Joe Lee
DRAWN: W.J.ZHU
ERP: 1361000047
Blue
ACPSC04-41PBWA/A
SPEC NO: DSAG1425
REV NO: V.2
DATE: MAY/30/2006
PAGE: 3 OF 5
APPROVED: J. Lu
CHECKED: Joe Lee
DRAWN: W.J.ZHU
ERP: 1361000047
ACPSC04-41PBWA/A
Recommended Soldering Pattern
(Units : mm; Tolerance: ±0.15)
Reel Dimension
Tape Specifications
(Units : mm)
SPEC NO: DSAG1425
REV NO: V.2
DATE: MAY/30/2006
PAGE: 4 OF 5
APPROVED: J. Lu
CHECKED: Joe Lee
DRAWN: W.J.ZHU
ERP: 1361000047
PACKING & LABEL SPECIFICATIONS
ACPSC04-41PBWA/A
SPEC NO: DSAG1425
REV NO: V.2
DATE: MAY/30/2006
PAGE: 5 OF 5
APPROVED: J. Lu
CHECKED: Joe Lee
DRAWN: W.J.ZHU
ERP: 1361000047
Similar pages