Emerson Network Power LDO03C-005W05-VJ Ldo03c sery Datasheet

Embedded Power for
Business-Critical Continuity
SXX06E
Rev. 08.01.06
Page 1 of 2
Rev. 01.29.09
LDO03C
1 of 4
LDO03C Series
15 Watts
Total Power:
15 Watts
Input Voltage: 3-13.8 Vdc
No. of Outputs: Single
Electrical Specifications
Output
Output voltage
See Note 5
Output setpoint accuracy
0.1% trim resistors
±1.0%
Line regulation
Low line to high line
±0.5%
Load regulation
Full load to min. load
Min./max. load
Special Features
• 3 A output current rating
• Input voltage range:
3-13.8 Vdc
• Adjustable out voltage:
0.59-5.1 V
• Optional factory setting with
power good
• Excellent transient response
• Power enable
• Minimum airflow
• Small package
• Termination voltage
capability
• RoHS compliant
0.59-5.1 V
±0.5%
0 A/3 A
Overshoot
At turn-on
0.5% max.
Undershoot
At turn-off
100 mV max.
Ripple and noise
5 Hz to 20 MHz
See Note 1
25 mV
Vin=5 V, Vout=2.5 V
Transient response
See Notes 1, 2
235 mV max. deviation
20 μs recovery to within
regulation band
Input
Input voltage range
Input current
3-13.8 Vdc
Minimum load
Remote OFF
Input current (max.)
See Note 3
Start-up time
Power up
Remote ON/OFF
50 mA
5 mA
3 A @ lo max.
3 ms
2 ms
General
Efficiency (high input)
Vin=5 V, Vo=2.5 V, lo=3 A
Switching frequency
Fixed
Material flammability
UL, cUL 60950-1
TÜV Product Service (EN60950)
Certificate No. TBD
CB Report and
Certificate to IEC60950
1.5 MHz
UL94V-0
Weight
Safety
90%
1.7 g (0.06 oz.)
MTBF
12 V @ 40 °C, 100% load
Bellcore 332
Coplanarity
Surface mount models
10,000,000 hours
150μm
Embedded Power for
Business-Critical Continuity
Rev.01.29.09
LDO03C
2 of 4
Environmental Specifications
Thermal performance
See Note 5
Operating ambient
Non-operating ambient
-40 °C to +85 °C
-40 °C to +125 °C
Protection
Short-circuit
Hiccup, non-latching
Overvoltage protection
Hiccup, non-latching
Recommended System Capacitance
Input
See Note 6
0 μF
Output
See Note 7
0 μF
Ordering Information
Output
Power
(Max.)
Input
Voltage
Output
Voltage
Output
Current
(Min.)
Output
Current
(Max.)
Efficiency
(Typical)
15W
3-13.8 Vdc
0.59-5.1 V
0A
3A
90%
±0.2%
±0.5%
LDO03C-005W05-VJ
15W
3-13.8 Vdc
0.59-5.1 V
0A
3A
90%
±0.2%
±0.5%
LDO03C-005W05-HJ
15W
3-13.8 Vdc
0.59-5.1 V
0A
3A
90%
±0.2%
±0.5%
LDO03C-005W05-SJ
Regulation
Line
Load
Model
Number (3,5)
Part Number System with Options
Product Family
LDO
Product Family
LDO = LDO Series
Rated Output
Current
Performance
03
C
Rated Output
Current
03 = 3 Amp
Performance
C = Cost
Optimized
Input Voltage
-
Number of Pins
Type of Output
00
5W
Input Voltage
00 = 3-13.8 V
Type of Output
5W = 5 Pins and
Wide Output
Output Voltage Adjustment of the LDO03C Series
The ultra-wide output voltage trim range offers major advantages to users who select the
LDO03C series. It is no longer necessary to purchase a variety of modules in order to cover
different output voltages. The output voltage can be trimmed in a range of 0.59-5.1 Vdc.
When the LDO03C converter leaves the factory, the output has been adjusted to the default
voltage of 0.59 V.
Notes:
1. Measured as per recommended system capacitance. See Technical Reference Note.
2. di/dt = 10 A/μs, Vin = Nom, Tc = 25 °C, load change = 0.50 lo to full lo and full lo to 0.50.
3. External input fusing is recommended.
4. Additional part numbers may be available with different output voltages.
5. Airflow dependent, 100 LFM minimum required.
6. No capacitors needed for ripple current stability.
7. No capacitors needed for stability.
8. TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request,
please consult your local sales representative for details.
9. NOTICE: Some models do not support all options. Please contact your local Emerson
Network Power representative or use the on-line model number search tool at http://
www.powerconversion.com/powergroup/products.htm to find a suitable alternative.
Output Voltage
05
Output Voltage
05 = 0.59-5.1 V
Mounting Option
-
V
Mounting Option
V = Vertical
H = Horizontal
S = Horizontal SMT
VS = Vertical SMT
Custom Option
RoHS Compliance
X
J
Custom Option
RoHS Compliance
J = Pb free (RoHS
6/6 compliant)
Embedded Power for
Business-Critical Continuity
Rev. 01.29.09
LDO03C
3 of 4
Mechanical Drawings
Vertical Mount
Dimensions in inches (mm). Tolerances es (unless otherwise specified) 2 Places ±0.030 (±0.76) 3 Places ±0.010 (±0.25)
.212
.370
.610
LDO03C-005W05-VJ
D/C: ZYWWRR
Pin 1
.16
.025 SQ. PIN
.051
.067
TYP
.050
Horizontal Mount
.292
.370
.131
.610
LDO03C-005W05-HJ
D/C: ZYWWRR
.540
.025 SQ PIN
Pin 1
.051
.125
.067
TYP
.120
Embedded Power for
Business-Critical Continuity
SXX06E
Mechanical Drawings (Cont'd)
Rev. 08.01.06
Page 1 of 2
Americas
Rev. 01.29.09
LDO03C
4 of 4
5810 Van Allen Way
Carlsbad, CA 92008
USA
Telephone: +1 760 930 4600
Facsimile: +1 760 930 0698
Horizontal Surface Mount
.025
TYP
Europe (UK)
Waterfront Business Park
Merry Hill, Dudley
West Midlands, DY5 1LX
United Kingdom
Telephone: +44 (0) 1384 842 211
Facsimile: +44 (0) 1384 843 355
.315 MAX
.370
.131
.610
Asia (HK)
LDO03C-005W05-SJ
D/C: ZYWWRR
16th - 17th Floors, Lu Plaza
2 Wing Yip Street, Kwun Tong
Kowloon, Hong Kong
Telephone: +852 2176 3333
Facsimile: +852 2176 3888
.540
For global contact, visit:
www.powerconversion.com
.051
Pin 1
.067
TYP
.040 TYP
NOTE:
1. 9300161-0000 PACKAGING AND MATERIAL HANDLING PROCEDURE.
2. COSMETIC AND WORKMANSHIP PER 9300152-0000.
3. LABEL SHOWN FOR REFERENCE PLACEMENT ONLY.
Pin Assignments
Single Output
1. Enable
2. Vin
3. Common/RTN
4. Vout
5. PG/Trim
6. Mech Pin (Horz/SMT only)
For technical support, visit:
http://www.powerconversion.
com/support/product/technical-support.php
While every precaution has been taken to ensure
accuracy and completeness in this literature, Emerson
Network Power assumes no responsibility, and disclaims
all liability for damages resulting from use of this
information or for any errors or omissions.
Printed in U.S.A.
Issue SF3
Emerson Network Power.
The global leader in enabling
business-critical continuity.
AC Power
Connectivity
DC Power
Embedded Power
Inbound Power
Integrated Cabinet Solutions
Outside Plant
Precision Cooling
Site Monitoring and Services
EmersonNetworkPower. com
*This is a Preliminary Datasheet. Emerson Network
Power reserves the right to make changes to the
information contained herein without notice and
assumes no liability as a result of its use or application.
Emerson Network Power and the Emerson
Network Power logo are trademarks and
service marks of Emerson Electric Co.
©2008 Emerson Electric Co.
Similar pages