Fairchild HCPL-2503 High speed transistor optocoupler Datasheet

Single-Channel: 6N135, 6N136, HCPL-2503, HCPL-4502
Dual-Channel: HCPL-2530, HCPL-2531
High Speed Transistor Optocouplers
tm
Features
Description
■ High speed–1MBit/s
The HCPL-4502/HCPL-2503, 6N135/6 and HCPL-2530/
HCPL-2531 optocouplers consist of an AlGaAs LED optically coupled to a high speed photodetector transistor.
■ Superior CMR-10kV/µs
■ Dual-Channel HCPL-2530/HCPL-2531
■ Double working voltage–480V RMS
■ CTR guaranteed 0–70°C
■ U.L. recognized (File # E90700)
Applications
■ Line receivers
■ Pulse transformer replacement
■ Output interface to CMOS-LSTTL-TTL
A separate connection for the bias of the photodiode
improves the speed by several orders of magnitude over
conventional phototransistor optocouplers by reducing
the base-collector capacitance of the input transistor.
An internal noise shield provides superior common mode
rejection of 10kV/µs. An improved package allows superior insulation permitting a 480V working voltage compared to industry standard of 220V.
■ Wide bandwidth analog coupling
Package
Schematic
N/C 1
8 VCC
+ 1
V
8
+ 2
1
7 VB
F1
_
2
7 V01
3
6 V02
VF
_
3
6 VO
_
V
N/C 4
8
8 VCC
5 GND
F2
+ 4
5 GND
8
1
1
6N135, 6N136, HCPL-2503, HCPL-4502
HCPL-2530/HCPL-2531
Pin 7 is not connected in
Part Number HCPL-4502
1
©2005 Fairchild Semiconductor Corporation
Single-Channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 Rev. 1.0.5
www.fairchildsemi.com
Single-Channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 High Speed Transistor Optocouplers
July 2006
Symbol
Parameter
Condition
Value
Units
TSTG
Storage Temperature
-55 to +125
°C
TOPR
Operating Temperature
-55 to +100
°C
TSOL
Lead Solder Temperature
260 for 10 sec
°C
IF (avg)
DC/Average Forward Input
Current Each Channel(1)
25
mA
IF (pk)
Peak Forward Input Current
Each Channel(2)
50% duty cycle, 1ms P.W.
50
mA
IF (trans)
Peak Transient Input Current
Each Channel
≤1 µs P.W., 300pps
1.0
A
VR
Reverse Input Voltage Each
Channel
5
V
PD
Input Power Dissipation Each
Channel
6N135/6N136 and HCPL-2503/4502
100
mW
HCPL-2530/253(3)
45
EMITTER
DETECTOR
IO (avg)
Average Output Current Each
Channel
8
mA
IO (pk)
Peak Output Current Each
Channel
16
mA
VEBR
Emitter-Base Reverse Voltage
5
V
VCC
Supply Voltage
-0.5 to 30
V
VO
Output Voltage
IB
Base Current
6N135, 6N136 and HCPL-2503 only
PD
Output Power Dissipation
Each Channel
6N135, 6N136 and HCPL-2503 only
-0.5 to 20
V
5
mA
6N135, 6N136, HCPL-2503, HCPL-4502(4)
100
mW
HCPL-2530, HCPL-2531
35
mW
Notes:
1. Derate linearly above 70°C free-air temperature at a rate of 0.8mA/°C.
2. Derate linearly above 70°C free-air temperature at a rate of 1.6mA/°C.
3. Derate linearly above 70°C free-air temperature at a rate of 0.9 mW/°C.
4. Derate linearly above 70°C free-air temperature at a rate of 2.0 mW/°C.
2
Single-Channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 Rev. 1.0.5
www.fairchildsemi.com
Single-Channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 High Speed Transistor Optocouplers
Absolute Maximum Ratings (TA = 25°C unless otherwise specified)
Individual Component Characteristics
Symbol
Parameter
Test Conditions
Device
Min.
Typ.*
Max.
Unit
1.45
1.7
V
EMITTER
VF
Input Forward Voltage
IF = 16mA, TA =25°C
IF = 16mA
BVR
Input Reverse Breakdown
Voltage
IR = 10 µA
∆VF/∆TA Temperature Coefficient of
Forward Voltage
IF = 16mA
1.8
5.0
V
-1.6
mV/°C
DETECTOR
IOH
ICCL
ICCH
Logic High Output Current
Logic Low Supply Current
Logic High Supply Current
IF = 0mA, VO = VCC = 5.5V,
TA =25°C
All
0.001
0.5
IF = 0mA, VO = VCC = 15V,
TA =25°C
6N135
6N136
HCPL-4502
HCPL-2503
0.005
1
IF = 0mA, VO = VCC = 15V
All
µA
50
IF = 16mA, VO = Open,
VCC = 15V
6N135
6N136
HCPL-4502
HCPL-2503
120
200
IF1 = IF2 = 16mA,
VO = Open, VCC = 15V
HCPL-2530
HCPL-2531
200
400
IF = 0mA, VO = Open,
VCC = 15V, TA =25°C
6N135
6N136
HCPL-4502
HCPL-2503
1
IF = 0mA, VO = Open,
VCC = 15V
6N135
6N136
HCPL-4502
HCPL-2503
2
IF = 0mA, VO = Open,
VCC = 15V
HCPL-2530
HCPL-2531
0.02
µA
µA
4
*All Typicals at TA = 25°C
3
Single-Channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 Rev. 1.0.5
www.fairchildsemi.com
Single-Channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 High Speed Transistor Optocouplers
Electrical Characteristics (TA = 0 to 70°C Unless otherwise specified)
Symbol
Parameter
Test Conditions
Device
Min. Typ.* Max. Unit
COUPLED
CTR
Current Transfer
Ratio(5)
IF = 16mA, VO = 0.4 V,
VCC = 4.5V, TA =25°C
IF = 16mA,
VCC = 4.5V
VOL
Logic LOW Output
Voltage
6N135
HCPL-2530
7
18
50
%
6N136
HCPL-4502
HCPL-2531
19
27
50
%
HCPL-2503
12
27
%
VOL = 0.4V
6N135
5
21
%
VOL = 0.5V
HCPL-2530
VOL = 0.4V
6N136
HCPL-4502
15
30
%
VOL = 0.5V
HCPL-2531
VOL = 0.4V
HCPL-2503
9
30
%
IF = 16mA, IO = 1.1mA,
VCC = 4.5V, TA =25°C
6N135
0.18
0.4
HCPL-2530
0.18
0.5
IF = 16mA, IO = 3mA,
VCC = 4.5V, TA =25°C
6N136
HCPL-2503
0.25
0.4
HCPL-2531
0.25
0.5
IF = 16mA, IO = 0.8mA,
VCC = 4.5V
6N135
HCPL-2530
0.5
IF = 16mA, IO = 2.4mA,
VCC = 4.5V
HCPL-4502
HCPL-2531
0.5
V
*All Typicals at TA = 25°C
Note:
5. Current Transfer Ratio is defined as a ratio of output collector current, IO, to the forward LED input current, IF,
times 100%.
4
Single-Channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 Rev. 1.0.5
www.fairchildsemi.com
Single-Channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 High Speed Transistor Optocouplers
Transfer Characteristics (TA = 0 to 70°C Unless otherwise specified)
Symbol Parameter
TPHL
TPLH
|CMH|
|CML|
Propagation Delay
Time to Logic LOW
Propagation Delay
Time to Logic HIGH
Common Mode
Transient
Immunity at
Logic High
Common Mode
Transient
Immunity at
Logic Low
Test Conditions
Device
Min.
Typ.*
Max.
Unit
TA = 25°C, RL = 4.1kΩ,
IF = 16mA(6) (Fig. 7)
6N135
HCPL-2530
0.45
1.5
µs
RL = 1.9kΩ, IF = 16mA,
TA = 25°C(7) (Fig. 7)
6N136
HCPL-4502
HCPL-2503
HCPL-2531
0.45
0.8
µs
RL = 4.1kΩ, IF = 16mA(6) (Fig. 7)
6N135
HCPL-2530
2.0
µs
RL = 1.9kΩ, IF = 16mA(7) (Fig. 7)
6N136
HCPL-4502
HCPL-2503
HCPL-2531
1.0
µs
TA = 25°C, (RL = 4.1kΩ,
IF = 16mA(6) (Fig. 7)
6N135
HCPL-2530
0.5
1.5
µs
RL = 1.9kΩ, IF = 16mA(7) (Fig. 7)
TA = 25°C
6N136
HCPL-4502
HCPL-2503
HCPL-2531
0.3
0.8
µs
RL = 4.1kΩ, IF = 16mA(6) (Fig. 7)
6N135
HCPL-2530
2.0
µs
RL = 1.9kΩ, IF = 16mA(7) (Fig. 7)
6N136
HCPL-4502
HCPL-2503
HCPL-2531
1.0
µs
IF = 0mA, VCM = 10VP-P,,
RL = 4.1kΩ, TA = 25°C(8) (Fig. 8)
6N135
HCPL-2530
10,000
V/µs
IF = 0mA, VCM = 10VP-P,
RL = 1.9kΩ, TA = 25°C(8) (Fig. 8)
6N136
HCPL-4502
HCPL-2503
HCPL-2531
10,000
V/µs
IF = 16mA, VCM = 10 VP-P,
RL = 4.1kΩ, TA = 25°C(8) (Fig. 8)
6N135
HCPL-2530
10,000
V/µs
IF = 16mA, VCM = 10 VP-P,
RL = 1.9kΩ(8) (Fig. 8)
6N136
HCPL-4502
HCPL-2503
HCPL-2531
10,000
V/µs
** All Typicals at TA = 25°C
Notes:
6. The 4.1kΩ load represents 1 LSTTL unit load of 0.36mA and 6.1kΩ pull-up resistor.
7. The 1.9kΩ load represents 1 TTL unit load of 1.6mA and 5.6kΩ pull-up resistor.
8. Common mode transient immunity in logic high level is the maximum tolerable (positive) dVcm/dt on the leading edge
of the common mode pulse signal VCM, to assure that the output will remain in a logic high state (i.e., VO > 2.0V).
Common mode transient immunity in logic low level is the maximum tolerable (negative) dVcm/dt on the trailing edge
of the common mode pulse signal, VCM, to assure that the output will remain in a logic low state (i.e., VO < 0.8V).
5
Single-Channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 Rev. 1.0.5
www.fairchildsemi.com
Single-Channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 High Speed Transistor Optocouplers
Switching Characteristics (TA = 0 to 70°C unless otherwise specified., VCC = 5V)
Symbol
II-O
Characteristics
Test Conditions
Input-Output Insulation
Leakage Current
Relative humidity = 45%,
TA = 25°C, t = 5s,
VI-O = 3000 VDC(9)
VISO
Withstand Insulation Test
Voltage
RH ≤ 50%, TA = 25°C, II-O ≤ 2 µA,
t = 1 min.(9)
RI-O
Resistance (Input to Output)
VI-O = 500VDC(9)
MHz(9)
CI-O
Capacitance (Input to Output)
f=1
HFE
DC Current Gain
IO = 3mA, VO = 5V(9)
II-I
Input-Input Insulation Leakage RH ≤ 45%, VI-I = 500VDC(10)
Current
t = 5 s, (HCPL-2530/2531 only)
RI-I
Input-Input Resistance
CI-I
Input-Input Capacitance
Min
Typ**
2500
Max
Unit
1.0
µA
VRMS
1012
Ω
0.6
pF
150
0.005
µA
VI-I = 500 VDC(10)
(HCPL-2530/2531 only)
1011
Ω
f = 1MHz)(10)
(HCPL-2530/2531 only)
0.03
pF
Notes:
9. Device is considered a two terminal device: Pins 1, 2, 3 and 4 are shorted together and Pins 5, 6, 7 and 8 are
shorted together.
10. Measured between pins 1 and 2 shorted together, and pins 3 and 4 shorted together.
I
6
Single-Channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 Rev. 1.0.5
www.fairchildsemi.com
Single-Channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 High Speed Transistor Optocouplers
Isolation Characteristics (TA = 0 to 70°C Unless otherwise specified)
1.0
1.0
NORMALIZED CTR
NORMALIZED CTR
Fig. 2 Normalized CTR vs. Temperature
1.2
0.8
0.6
0.4
VO = 0.4 V
VCC = 5 V
TA = 25°C
Normalized to:
IF = 16 mA
0.2
0.0
0.1
1
0.8
0.6
0.4
10
0.0
-60
100
-40
-20
IF - FORWARD CURRENT (mA)
20
40
60
80
100
80
100
Fig. 4 Logic High Output Current
vs. Temperature
1000
TA = 25°C
VCC = 5 V
14
IOH - LOGIC HIGH OUTPUT CURRENT (nA)
16
IO - OUTPUT CURRENT (mA)
0
TA - TEMPERATURE (°C)
Fig. 3 Output Current vs. Output Voltage
IF = 40 mA
IF = 35 mA
12
IF = 30 mA
10
IF = 25 mA
8
IF = 20 mA
6
IF = 15 mA
4
IF = 10 mA
2
IF = 5 mA
0
2
4
6
8
10
12
14
16
18
IF = 0 mA
VCC = 5 V
VO = 5 V
100
10
1
0.1
-60
0
20
-40
-20
20
40
60
Fig. 6 Propagation Delay vs. Load Resistance
Fig. 5 Propagation Delay vs. Temperature
800
10000
700
RL = 4.1 K (TPLH)
TP - PROPAGATION DELAY (ns)
600
0
TA - TEMPERATURE (°C)
VO - OUTPUT VOLTAGE (V)
Tp - PROPAGATION DELAY (ns)
IF = 16mA
VCC = 5 V
VO = 0.4 V
Normalized to:
TA = 25°C
0.2
RL = 4.1 K (TPLH)
500
400
300
200
RL = 1.9 K (TPHL)
IF = 16 mA
VCC = 5 V
RL = 1.9 K (TPLH)
100
IF - 16 mA (TPHL)
IF - 10 mA (TPHL)
1000
IF - 16 mA (TPLH)
IF - 10 mA (TPLH)
0
-60
-40
-20
0
20
40
TA - TEMPERATURE (°C)
60
80
100
VCC = 5 V
TA = 25°C
100
1
10
RL = LOAD RESISTANCE (kΩ)
7
Single-Channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 Rev. 1.0.5
www.fairchildsemi.com
Single-Channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 High Speed Transistor Optocouplers
Fig. 1 Normalized CTR vs. Forward Current
1.2
Noise
Shield
8
+
2
7
VF
-
3
6
VCC
VB
+5 V
4
5
IF
MONITOR
1
8
VCC
+5 V
RL
VF1
-
7
2
V01
VO
C L = 1.5 µF
3
6
4
5
VF2
+
Rm
C L = 1.5 µF
GND
Noise
Shield
+
-
VO
0.1 µF
Rm
IF
10% DUTY CYCLE
I/f < 100µS
RL
VO
I F Monitor
Pulse
Generator
tr = 5ns
Z O = 50 Ω
V02
0.1 µF
GND
Test Circuit for HCPL-2530 and HCPL-2531
Test Circuit for 6N135, 6N136, HCPL-2503 and HCPL- 4502
IF
0
5V
VO
1.5 V
1.5 V
VOL
TPHL
TPLH
Fig. 7 Switching Time Test Circuit
IF
1
Noise
Shield
8
+
2
A
B
7
VCC
+
+5 V
IF
VB
VF1
-
RL
Noise
Shield
1
8
VCC
+5 V
RL
2
7
3
6
4
5
V01
VO
A
VF
-
3
6
VO
B
VO
VFF
0.1 µF
VFF
5
4
+
GND
VF2
+
-
V02
0.1 µF
GND
VCM
-
+
Pulse Gen
VCM
-
Pulse Gen
Test Circuit for 6N135, 6N136, HCPL-2503 and HCPL-4502
Test Circuit for HCPL-2530 and HCPL-2531
VCM 10 V
0V
90%
90%
10%
tr
VO
10%
tf
5V
Switch at A : IF = 0 mA
VO
VOL
Switch at A : IF = 16 mA
Fig. 8 Common Mode Immunity Test Circuit
8
Single-Channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 Rev. 1.0.5
www.fairchildsemi.com
Single-Channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 High Speed Transistor Optocouplers
Pulse
Generator I
F
tr = 5ns
Z O = 50 Ω
10% D.C.
I/f < 100µs
1
Through Hole
Surface Mount
0.390 (9.91)
0.370 (9.40)
4
PIN 1
ID.
4
3
2
3
2
1
1
0.270 (6.86)
0.250 (6.35)
0.270 (6.86)
0.250 (6.35)
5
6
8
7
5
6
7
SEATING PLANE
0.390 (9.91)
0.370 (9.40)
8
0.070 (1.78)
0.045 (1.14)
0.070 (1.78)
0.045 (1.14)
0.154 (3.90)
0.120 (3.05)
0.022 (0.56)
0.016 (0.41)
0.016 (0.40)
0.008 (0.20)
0.100 (2.54) TYP
0.022 (0.56)
0.016 (0.41)
15° MAX
0.300 (7.62)
TYP
0.4” Lead Spacing
3
0.300 (7.62)
TYP
0.020 (0.51)
MIN
0.020 (0.51) MIN
0.200 (5.08)
0.140 (3.55)
4
PIN 1
ID.
0.100 (2.54)
TYP
Lead Coplanarity : 0.004 (0.10) MAX
0.016 (0.41)
0.008 (0.20)
0.045 [1.14]
0.315 (8.00)
MIN
0.405 (10.30)
MIN
Recommend Pad Layout for Surface
Mount Leadform
2
PIN 1
ID.
1
0.070 (1.78)
0.270 (6.86)
0.250 (6.35)
0.060 (1.52)
5
6
7
8
SEATING PLANE
0.390 (9.91)
0.370 (9.40)
0.100 (2.54)
0.295 (7.49)
0.070 (1.78)
0.045 (1.14)
0.415 (10.54)
0.030 (0.76)
0.004 (0.10) MIN
0.200 (5.08)
0.140 (3.55)
0.154 (3.90)
0.120 (3.05)
0.022 (0.56)
0.016 (0.41)
0.016 (0.40)
0.008 (0.20)
0.100 (2.54) TYP
0° to 15°
0.400 (10.16)
TYP
9
Single-Channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 Rev. 1.0.5
www.fairchildsemi.com
Single-Channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 High Speed Transistor Optocouplers
Package Dimensions All dimensions are in inches (millimeters)
Option
Example Part Number
Description
S
6N135S
SD
6N135SD
W
6N135W
0.4" Lead Spacing
V
6N135V
VDE0884
WV
6N135WV
VDE0884; 0.4” lead spacing
SV
6N135SV
VDE0884; surface mount
SDV
6N135SDV
Surface Mount Lead Bend
Surface Mount; Tape and reel
VDE0884; surface mount; tape and reel
Marking Information
1
V
3
2503
2
XX YY T1
6
4
5
Definitions
1
Fairchild logo
2
Device number
3
VDE mark (Note: Only appears on parts ordered with VDE option –
See order entry table)
4
Two digit year code, e.g., ‘03’
5
Two digit work week ranging from ‘01’ to ‘53’
6
Assembly package code
10
Single-Channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 Rev. 1.0.5
www.fairchildsemi.com
Single-Channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 High Speed Transistor Optocouplers
Ordering Information
12.0 ±0.1
4.0 ±0.1
4.90 ±0.20
Ø1.55 ±0.05
4.0 ±0.1
0.30 ±0.05
1.75 ±0.10
7.5 ±0.1
16.0 ±0.3
13.2 ±0.2
10.30 ±0.20
Ø1.6 ±0.1
10.30 ±0.20
0.1 MAX
User Direction of Feed
Reflow Profile
Temperature (°C)
300
215 C, 10–30 s
250
225 C peak
200
150
Time above 183C, 60–150 sec
100
50
Ramp up = 3C/sec
0
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
Time (Minute)
• Peak reflow temperature: 225C (package surface temperature)
• Time of temperature higher than 183C for 60–150 seconds
• One time soldering reflow is recommended
11
Single-Channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 Rev. 1.0.5
www.fairchildsemi.com
Single-Channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 High Speed Transistor Optocouplers
Carrier Tape Specifications
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not
intended to be an exhaustive list of all such trademarks.
FACT Quiet Series™
GlobalOptoisolator™
GTO™
HiSeC™
I2C™
i-Lo™
ImpliedDisconnect™
IntelliMAX™
ISOPLANAR™
LittleFET™
MICROCOUPLER™
MicroFET™
MicroPak™
MICROWIRE™
MSX™
MSXPro™
Across the board. Around the world.™
The Power Franchise®
Programmable Active Droop™
ACEx™
ActiveArray™
Bottomless™
Build it Now™
CoolFET™
CROSSVOLT™
DOME™
EcoSPARK™
E2CMOS™
EnSigna™
FACT™
FAST®
FASTr™
FPS™
FRFET™
OCX™
OCXPro™
OPTOLOGIC®
OPTOPLANAR™
PACMAN™
POP™
Power247™
PowerEdge™
PowerSaver™
PowerTrench®
QFET®
QS™
QT Optoelectronics™
Quiet Series™
RapidConfigure™
RapidConnect™
µSerDes™
ScalarPump™
SILENT SWITCHER®
SMART START™
SPM™
Stealth™
SuperFET™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
SyncFET™
TCM™
TinyBoost™
TinyBuck™
TinyPWM™
TinyPower™
TinyLogic®
TINYOPTO™
TruTranslation™
UHC™
UniFET™
UltraFET®
VCX™
Wire™
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS
HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE
APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER
ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S
WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR
SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems which,
(a) are intended for surgical implant into the body, or (b) support or
sustain life, or (c) whose failure to perform when properly used in
accordance with instructions for use provided in the labeling, can be
reasonably expected to result in significant injury to the user.
2. A critical component is any component of a life support device or
system whose failure to perform can be reasonably expected to
cause the failure of the life support device or system, or to affect its
safety or effectiveness.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Definition
Advance Information
Formative or In Design
This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.
Preliminary
First Production
This datasheet contains preliminary data, and
supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice to improve
design.
No Identification Needed
Full Production
This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice to improve design.
Obsolete
Not In Production
This datasheet contains specifications on a product
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.
Rev. I20
12
Single-Channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 Rev. 1.0.5
www.fairchildsemi.com
Single-Channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 High Speed Transistor Optocouplers
TRADEMARKS
Similar pages