NSC OPA244UA2K5E4 Micropower, single-supply micropower, single-supply microamplifier â ¢ sery Datasheet

®
OPA
OPA244
OPA2244
OPA4244
OPA
244
224
4
OPA
OPA
244
®
424
OPA
4
224
4
MicroPower,
Single-Supply
OPERATIONAL AMPLIFIERS
MicroAmplifier ™ Series
FEATURES
DESCRIPTION
● MicroSIZE PACKAGES
OPA244 (Single): SOT-23-5
OPA2244 (Dual): MSOP-8
OPA4244 (Quad): TSSOP-14
● MicroPOWER: IQ = 50µA/channel
● SINGLE SUPPLY OPERATION
● WIDE BANDWIDTH: 430kHz
● WIDE SUPPLY RANGE:
Single Supply: 2.2V to 36V
Dual Supply: ±1.1V to ±18V
The OPA244 (single), OPA2244 (dual), and OPA4244 (quad)
op amps are designed for very low quiescent current
(50µA/channel), yet achieve excellent bandwidth. Ideal for
battery powered and portable instrumentation, all versions are
offered in micro packages for space-limited applications.
The dual and quad versions feature completely independent
circuitry for lowest crosstalk and freedom from interaction, even
when overdriven or overloaded.
The OPA244 series is easy to use and free from phase
inversion and overload problems found in some other op amps.
These amplifiers are stable in unity gain and excellent performance is maintained as they swing to their specified limits.
They can be operated from single (+2.2V to +36V) or dual
supplies (±1.1V to ±18V). The input common-mode voltage
range includes ground—ideal for many single supply applications. All versions have similar performance. However, there
are some differences, such as common-mode rejection. All
versions are interchangeable in most applications.
All versions are offered in miniature, surface-mount packages.
OPA244 (single version) comes in the tiny 5-lead SOT-23-5
surface mount, SO-8 surface mount, and 8-pin DIP. OPA2244
(dual version) is available in the MSOP-8 surface mount,
SO-8 surface-mount, and 8-pin DIP. The OPA4244 (quad)
comes in the TSSOP-14 surface mount. They are fully specified
from –40°C to +85°C and operate from –55°C to +125°C.
A SPICE Macromodel is available for design analysis.
APPLICATIONS
●
●
●
●
●
BATTERY POWERED SYSTEMS
PORTABLE EQUIPMENT
PCMCIA CARDS
BATTERY PACKS AND POWER SUPPLIES
CONSUMER PRODUCTS
OPA244
Out 1
5
V+
4
–In
V– 2
+In 3
OPA4244
SOT-23-5
OPA2244
OPA244
NC
1
8
NC
Out A
1
–In
2
7
V+
–In A
2
+In
3
6
Output
+In A
3
V–
4
5
NC
V–
4
8-Pin DIP, SO-8
A
B
8
V+
7
Out B
6
–In B
5
+In B
8-Pin DIP, SO-8, MSOP-8
Output A
1
14
Output D
–Input A
2
13
–Input D
+Input A
3
12
+Input D
+V
4
11
–V
+Input B
5
10
+Input C
–Input B
6
9
–Input C
Output B
7
8
Output C
TSSOP-14
International Airport Industrial Park • Mailing Address: PO Box 11400, Tucson, AZ 85734 • Street Address: 6730 S. Tucson Blvd., Tucson, AZ 85706 • Tel: (520) 746-1111
Twx: 910-952-1111 • Internet: http://www.burr-brown.com/ • Cable: BBRCORP • Telex: 066-6491 • FAX: (520) 889-1510 • Immediate Product Info: (800) 548-6132
© 1999 Burr-Brown Corporation
SBOS088
PDS-1437C
Printed in U.S.A. December, 1999
SPECIFICATIONS: VS = +2.6V to +36V
Boldface limits apply over the specified temperature range, TA = –40°C to +85°C
At TA = +25°C, RL = 20kΩ connected to ground, unless otherwise noted.
OPA244NA, PA, UA
PARAMETER
CONDITION
OFFSET VOLTAGE
Input Offset Voltage
TA = –40°C to 85°C
vs Temperature
vs Power Supply
TA = –40°C to 85°C
OUTPUT
Voltage Output, Positive
TA = –40°C to 85°C
Voltage Output, Negative
TA = –40°C to 85°C
Voltage Output, Positive
TA = –40°C to 85°C
Voltage Output, Negative
TA = –40°C to 85°C
Short-Circuit Current
Capacitive Load Drive
POWER SUPPLY
Specified Voltage Range
Minimum Operating Voltage
Quiescent Current
TA = –40°C to 85°C
TEMPERATURE RANGE
Specified Range
Operating Range
Storage Range
Thermal Resistance
SOT-23-5 Surface-Mount
SO-8 Surface-Mount
8-Pin DIP
UNITS
±1.5
±2
±0.7
dVOS/dT
PSRR
TA = –40°C to 85°C
VS = +2.6V to +36V
VS = +2.6V to +36V
±4
5
50
50
mV
mV
µV/°C
µV/V
µV/V
VCM = VS /2
VCM = VS /2
–10
±1
–25
±10
nA
nA
IB
IOS
VCM
CMRR
VS = ±18V, VCM = –18V to +17.1V
VS = ±18V, VCM = –18V to +17.1V
VO = 0.5V to (V+) – 0.9
VO = 0.5V to (V+) – 0.9
AOL
GBW
SR
VO
µVp-p
nV/√Hz
fA/√Hz
0.4
22
40
en
in
0
84
84
INPUT IMPEDANCE
Differential
Common-Mode
FREQUENCY RESPONSE
Gain-Bandwidth Product
Slew Rate
Settling Time 0.01%
Overload Recovery Time
MAX
VS = ±7.5V, VCM = 0
NOISE
Input Voltage Noise, f = 0.1kHz to 10kHz
Input Voltage Noise Density, f = 1kHz
Current Noise Density, f = 1kHz
OPEN-LOOP GAIN
Open-Loop Voltage Gain
TA = –40°C to 85°C
TYP(1)
VOS
INPUT BIAS CURRENT
Input Bias Current
Input Offset Current
INPUT VOLTAGE RANGE
Common-Mode Voltage Range
Common-Mode Rejection
TA = –40°C to 85°C
MIN
86
86
G=1
10V Step
VIN • Gain = VS
AOL ≥ 80dB, RL = 20kΩ to VS/2
AOL ≥ 80dB, RL = 20kΩ to VS/2
AOL ≥ 80dB, RL = 20kΩ to VS/2
AOL ≥ 80dB, RL = 20kΩ to VS/2
AOL ≥ 80dB, RL = 20kΩ to Ground
AOL ≥ 80dB, RL = 20kΩ to Ground
AOL ≥ 80dB, RL = 20kΩ to Ground
AOL ≥ 80dB, RL = 20kΩ to Ground
(V+) – 0.9
(V+) – 0.9
0.5
0.5
TA = –40°C to 85°C
+2.6
ISC
CLOAD
VS
IQ
98
(V+) – 0.9
V
dB
dB
106 || 2
109 || 2
Ω || pF
Ω || pF
106
dB
dB
430
–0.1/+0.16
150
8
kHz
V/µs
µs
µs
(V+) – 0.75
(V+) – 0.75
0.2
0.2
(V+) – 0.75
(V+) – 0.75
0.1
0.1
–25/+12
See Typical Curve
V
V
V
V
V
V
V
V
mA
+36
+2.2
50
IO = 0
IO = 0
–40
–55
–65
θJA
200
150
100
60
70
V
V
µA
µA
85
125
150
°C
°C
°C
°C/W
°C/W
°C/W
NOTE: (1) VS = +15V.
The information provided herein is believed to be reliable; however, BURR-BROWN assumes no responsibility for inaccuracies or omissions. BURR-BROWN assumes
no responsibility for the use of this information, and all use of such information shall be entirely at the user’s own risk. Prices and specifications are subject to change
without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. BURR-BROWN does not authorize or warrant
any BURR-BROWN product for use in life support devices and/or systems.
®
OPA244, 2244, 4244
2
SPECIFICATIONS: VS = +2.6V to +36V
Boldface limits apply over the specified temperature range, TA = –40°C to +85°C
At TA = +25°C, RL = 20kΩ connected to ground, unless otherwise noted.
OPA2244EA, PA, UA
PARAMETER
OFFSET VOLTAGE
Input Offset Voltage
TA = –40°C to 85°C
vs Temperature
vs Power Supply
TA = –40°C to 85°C
Channel Separation
CONDITION
OUTPUT
Voltage Output, Positive
TA = –40°C to 85°C
Voltage Output, Negative
TA = –40°C to 85°C
Voltage Output, Positive
TA = –40°C to 85°C
Voltage Output, Negative
TA = –40°C to 85°C
Short-Circuit Current
Capacitive Load Drive
POWER SUPPLY
Specified Voltage Range
Minimum Operating Voltage
Quiescent Current (per amplifier)
TA = –40°C to 85°C
TEMPERATURE RANGE
Specified Range
Operating Range
Storage Range
Thermal Resistance
MSOP-8 Surface-Mount
SO-8 Surface-Mount
8-Pin DIP
UNITS
±1.5
±2
mV
mV
µV/°C
µV/V
µV/V
dB
±0.7
dVOS/dT
PSRR
TA = –40°C to 85°C
VS = +2.6V to +36V
VS = +2.6V to +36V
±4
5
50
50
140
IB
IOS
VCM = VS /2
VCM = VS /2
–10
±1
VCM
CMRR
AOL
GBW
SR
VO
VS = ±18V, VCM = –18V to +17.1V
VS = ±18V, VCM = –18V to +17.1V
0
72
72
VO = 0.5V to (V+) – 0.9
VO = 0.5V to (V+) – 0.9
86
86
G=1
10V Step
VIN • Gain = VS
AOL ≥ 80dB, RL = 20kΩ to VS/2
AOL ≥ 80dB, RL = 20kΩ to VS/2
AOL ≥ 80dB, RL = 20kΩ to VS/2
AOL ≥ 80dB, RL = 20kΩ to VS/2
AOL ≥ 80dB, RL = 20kΩ to Ground
AOL ≥ 80dB, RL = 20kΩ to Ground
AOL ≥ 80dB, RL = 20kΩ to Ground
AOL ≥ 80dB, RL = 20kΩ to Ground
(V+) – 0.9
(V+) – 0.9
0.5
0.5
TA = –40°C to 85°C
+2.6
ISC
CLOAD
VS
IQ
–25
±10
98
(V+) – 0.9
V
dB
dB
106 || 2
109 || 2
Ω || pF
Ω || pF
106
dB
dB
430
–0.1/+0.16
150
8
kHz
V/µs
µs
µs
(V+) – 0.75
(V+) – 0.75
0.2
0.2
(V+) – 0.75
(V+) – 0.75
0.1
0.1
–25/+12
See Typical Curve
V
V
V
V
V
V
V
V
mA
+36
+2.2
40
IO = 0
IO = 0
nA
nA
µVp-p
nV/√Hz
fA/√Hz
0.4
22
40
en
in
INPUT IMPEDANCE
Differential
Common-Mode
FREQUENCY RESPONSE
Gain-Bandwidth Product
Slew Rate
Settling Time 0.01%
Overload Recovery Time
MAX
VS = ±7.5V, V CM = 0
NOISE
Input Voltage Noise, f = 0.1kHz to 10kHz
Input Voltage Noise Density, f = 1kHz
Current Noise Density, f = 1kHz
OPEN-LOOP GAIN
Open-Loop Voltage Gain
TA = –40°C to 85°C
TYP(1)
VOS
INPUT BIAS CURRENT
Input Bias Current
Input Offset Current
INPUT VOLTAGE RANGE
Common-Mode Voltage Range
Common-Mode Rejection
TA = –40°C to 85°C
MIN
–40
–55
–65
50
63
V
V
µA
µA
85
125
150
°C
°C
°C
θJA
200
150
100
°C/W
°C/W
°C/W
NOTE: (1) VS = +15V.
®
3
OPA244, 2244, 4244
SPECIFICATIONS: VS = +2.6V to +36V
Boldface limits apply over the specified temperature range, TA = –40°C to +85°C
At TA = +25°C, RL = 20kΩ connected to ground, unless otherwise noted.
OPA4244EA
PARAMETER
CONDITION
OFFSET VOLTAGE
Input Offset Voltage
TA = –40°C to 85°C
vs Temperature
vs Power Supply
TA = –40°C to 85°C
Channel Separation
OUTPUT
Voltage Output, Positive
TA = –40°C to 85°C
Voltage Output, Negative
TA = –40°C to 85°C
Voltage Output, Positive
TA = –40°C to 85°C
Voltage Output, Negative
TA = –40°C to 85°C
Short-Circuit Current
Capacitive Load Drive
POWER SUPPLY
Specified Voltage Range
Minimum Operating Voltage
Quiescent Current (per amplifier)
TA = –40°C to 85°C
TEMPERATURE RANGE
Specified Range
Operating Range
Storage Range
Thermal Resistance
TSSOP-14 Surface Mount
UNITS
±1.5
±2
mV
mV
µV/°C
µV/V
µV/V
dB
±0.7
dVOS/dT
PSRR
TA = –40°C to 85°C
VS = +2.6V to +36V
VS = +2.6V to +36V
±4
5
50
50
140
VCM = VS /2
VCM = VS /2
IB
IOS
–10
±1
VCM
CMRR
VS = ±18V, VCM = –18V to +17.1V
VS = ±18V, VCM = –18V to +17.1V
VO = 0.5V to (V+) – 0.9
VO = 0.5V to (V+) – 0.9
AOL
GBW
SR
VO
–25
±10
0
82
82
86
86
G=1
10V Step
VIN • Gain = VS
AOL ≥ 80dB, RL = 20kΩ to VS/2
AOL ≥ 80dB, RL = 20kΩ to VS/2
AOL ≥ 80dB, RL = 20kΩ to VS/2
AOL ≥ 80dB, RL = 20kΩ to VS/2
AOL ≥ 80dB, RL = 20kΩ to Ground
AOL ≥ 80dB, RL = 20kΩ to Ground
AOL ≥ 80dB, RL = 20kΩ to Ground
AOL ≥ 80dB, RL = 20kΩ to Ground
(V+) – 0.9
(V+) – 0.9
0.5
0.5
TA = –40°C to 85°C
+2.6
ISC
CLOAD
VS
IQ
104
(V+) – 0.9
V
dB
dB
106 || 2
109 || 2
Ω || pF
Ω || pF
106
dB
dB
430
–0.1/+0.16
150
8
kHz
V/µs
µs
µs
(V+) – 0.75
(V+) – 0.75
0.2
0.2
(V+) – 0.75
(V+) – 0.75
0.1
0.1
–25/+12
See Typical Curve
V
V
V
V
V
V
V
V
mA
+36
+2.2
40
IO = 0
IO = 0
–40
–55
–65
θJA
100
NOTE: (1) VS = +15V.
®
OPA244, 2244, 4244
4
nA
nA
µVp-p
nV/√Hz
fA/√Hz
0.4
22
40
en
in
INPUT IMPEDANCE
Differential
Common-Mode
FREQUENCY RESPONSE
Gain-Bandwidth Product
Slew Rate
Settling Time 0.01%
Overload Recovery Time
MAX
VS = ±7.5V, VCM = 0
NOISE
Input Voltage Noise, f = 0.1kHz to 10kHz
Input Voltage Noise Density, f = 1kHz
Current Noise Density, f = 1kHz
OPEN-LOOP GAIN
Open-Loop Voltage Gain
TA = –40°C to 85°C
TYP(1)
VOS
INPUT BIAS CURRENT
Input Bias Current
Input Offset Current
INPUT VOLTAGE RANGE
Common-Mode Voltage Range
Common-Mode Rejection
TA = –40°C to 85°C
MIN
60
70
V
V
µA
µA
85
125
150
°C
°C
°C
°C/W
ABSOLUTE MAXIMUM RATINGS(1)
ELECTROSTATIC
DISCHARGE SENSITIVITY
Supply Voltage, V+ to V– .................................................................... 36V
Input Voltage Range(2) ................................... (V–) – 0.3V to (V+) + 0.3V
Input Current(2) ................................................................................. 10mA
Output Short-Circuit(3) .............................................................. Continuous
Operating Temperature .................................................. –55°C to +125°C
Storage Temperature ..................................................... –65°C to +150°C
Junction Temperature ...................................................................... 150°C
Lead Temperature (soldering, 10s) ................................................. 300°C
ESD Capability ................................................................................ 2000V
This integrated circuit can be damaged by ESD. Burr-Brown
recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling
and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits
may be more susceptible to damage because very small
parametric changes could cause the device not to meet its
published specifications.
NOTES: (1) Stresses above these ratings may cause permanent damage.
Exposure to absolute maximum conditions for extended periods may degrade device reliability. (2) Inputs are diode-clamped to the supply rails and
should be current-limited to 10mA or less if input voltages can exceed rails
by more than 0.3V. (3) Short-circuit to ground, one amplifier per package.
PACKAGE /ORDERING INFORMATION
PRODUCT
PACKAGE
PACKAGE
DRAWING
NUMBER
Single
OPA244NA
SOT-23-5 Surface-Mount
331
–40°C to +85°C
A44
"
"
"
"
8-Pin DIP
SO-8 Surface-Mount
006
182
–40°C to +85°C
–40°C to +85°C
OPA244PA
OPA244UA
"
OPA244PA
OPA244UA
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
MARKING
ORDERING
NUMBER(1)
TRANSPORT
MEDIA
OPA244NA/250
OPA244NA/3K
OPA244PA
OPA244UA
OPA244UA/2K5
Tape and Reel
Tape and Reel
Rails
Rails
Tape and Reel
OPA2244EA/250
OPA2244EA/2K5
OPA2244PA
OPA2244UA
OPA2244UA/2K5
Tape and Reel
Tape and Reel
Rails
Rails
Tape and Reel
OPA4244EA/250
OPA4244EA/2K5
Tape and Reel
Tape and Reel
"
"
"
"
"
Dual
OPA2244EA
MSOP-8 Surface-Mount
337
–40°C to +85°C
A44
"
"
"
"
"
OPA2244PA
OPA2244UA
8-Pin DIP
SO-8 Surface-Mount
006
182
–40°C to +85°C
–40°C to +85°C
OPA2244PA
OPA2244UA
"
"
"
"
"
Quad
OPA4244EA
TSSOP-14 Surface-Mount
357
–40°C to +85°C
OPA4244EA
"
"
"
"
"
NOTE: (1) Products followed by a slash (/) are only available in Tape and Reel in the quantities indicated (e.g., /250 indicates 250 devices per reel). Ordering 3000
pieces of “OPA244NA/3K” will get a single 3000 piece Tape and Reel.
®
5
OPA244, 2244, 4244
TYPICAL PERFORMANCE CURVES
At TA = 25°C, VS = +15V, and RL = 20kΩ connected to Ground, unless otherwise noted.
CHANNEL SEPARATION
OPEN-LOOP GAIN AND PHASE vs FREQUENCY
180
160
140
120
–60
130
Phase
100
–80
–100
80
60
–120
Gain
Separation (dB)
150
–40
All Models
Phase(°)
–20
140
160
AOL (dB)
0
120
–140
20
–160
80
0
–180
70
–20
–200
60
10
100
10k
1k
100k
OPA4244
100
40
1
OPA244
110
OPA2244
90
1M
1
10
100
10k
1k
100k
Frequency (Hz)
Frequency (Hz)
POWER SUPPLY AND COMMON-MODE REJECTION vs FREQUENCY
110
120
100
110
100
90
PSRR, CMRR (dB)
PSRR, CMRR (dB)
OPA244
80
OPA2244
CMRR
70
OPA4244
60
50
90
80
CMRR
70
60
50
40
PSRR
PSRR
40
30
30
10
100
1k
10k
100k
1
1M
10
100
OPEN-LOOP GAIN vs LOAD RESISTANCE
100k
1M
OUTPUT VOLTAGE SWING vs OUTPUT CURRENT
15
120
VO = ±5V
Output Voltage Swing (V)
110
100
Gain(dB)
10k
1k
Frequency (Hz)
Frequency (Hz)
90
80
70
14
RL to VS /2
13
25°C
12
125°C
11
–55°C
10
–10
–11
–55°C
–12
125°C
–13
–14
25°C
–15
60
10
1
100
0
Load (kΩ)
±4
±6
±8
Output Current (mA)
®
OPA244, 2244, 4244
±2
6
±10
±12
±14
TYPICAL PERFORMANCE CURVES (Cont.)
At TA = 25°C, VS = +15V, and RL = 20kΩ connected to Ground, unless otherwise noted.
INPUT BIAS CURRENT
vs INPUT COMMON-MODE VOLTAGE
INPUT BIAS CURRENT vs TEMPERATURE
–12
–12
–11
Bias Current (nA)
Bias Current (nA)
–10
–8
–6
–10
–IB
–9
+IB
–8
–7
–4
–6
–2
–15
–10
–5
0
5
10
–5
–75
15
–50
–25
0
Common-Mode Voltage (V)
AOL, CMRR, PSRR vs TEMPERATURE
0.20
120
0.18
Slew Rate (V/µs)
110
CMRR
100
95
AOL
90
100
125
0.14
0.12
–SR
0.10
0.08
VS = ±7.5, RL = 20kΩ,
CL = 100pF, Gain = +1
0.06
0.04
85
0.02
0.00
–75
–50
0
–25
25
75
50
100
–75
125
–25
75
25
175
125
Temperature(°C)
Temperature (°C)
COMMON-MODE REJECTION
vs SUPPY VOLTAGE
QUIESCENT CURRENT AND SHORT-CIRCUIT
vs SUPPLY VOLTAGE
52
100
48
Quiescent Current (µA)
120
80
60
40
20
0
35
IQ
30
44
25
–ISC
40
20
36
15
+ISC
32
10
28
5
24
0
4
8
12
16
20
24
28
32
36
0
0
Suppy Voltage (V)
Short-Circuit Current (mA)
80
CMRR (dB)
75
+SR
0.16
PSRR
105
50
SLEW RATE vs TEMPERATURE
125
115
25
Temperature (°C)
4
8
12
16
20
24
28
32
36
Supply Voltage (V)
®
7
OPA244, 2244, 4244
TYPICAL PERFORMANCE CURVES (Cont.)
At TA = 25°C, VS = +15V, and RL = 20kΩ connected to Ground, unless otherwise noted.
50
–ISC
45
40
±10
+ISC
35
25
–75
–50
–25
0
25
50
75
100
0
125
–75
–50
0
–25
100
Voltage Noise
10
Output Voltage (Vp-p)
Current Noise
Current Noise (fA√Hz)
Voltage Noise (nV√Hz)
50
75
100
0
125
MAXIMUM OUTPUT VOLTAGE vs FREQUENCY
100
VS = 36V
30
25
20
VS =15V
15
10
5
1
1k
10k
1
100k
VS = 2.7V
0
100
1k
10k
100k
1M
Frequency(Hz)
Frequency (Hz)
SMALL SIGNAL OVERSHOOT vs LOAD CAPACITANCE
70%
60
OPA244
OPA4244
60%
G = +1
G = –2
OPA2244
50%
40
Overshoot (%)
Overshoot (%)
25
40
35
50
+10
20
1000
100
+15
+ISC
Temperature (°C)
1000
10
–15
IQ
+5
INPUT VOLTAGE AND CURRENT NOISE
SPECTRAL DENSITY vs FREQUENCY
1
–20
30
Temperature (°C)
10
–25
–ISC
35
±5
30
–30
OPA4244
G = –1
30
G = +3
20
40%
G = +1, RL = ∞
30%
20%
G = +1, RL = 20kΩ
G = +2, RL = 20kΩ
10
10%
G = +3, RL = 20kΩ
0%
0
100
1k
10
10k
®
OPA244, 2244, 4244
100
1k
Load Capacitance (pF)
Load Capacitance (pF)
8
10k
Short-Circuit Current (mA)
55
Quiescent Current (µA)
Quiescent Current (µA)
60
Short-Circuit Current (mA)
QUIESCENT AND SHORT-CIRCUIT CURRENT vs TEMPERATURE
±40
60
OPA244
±35
55
OPA2244
±30
50
±25
45
±20
IQ
40
±15
65
TYPICAL PERFORMANCE CURVES (Cont.)
At TA = 25°C, VS = +15V, and RL = 20kΩ connected to Ground, unless otherwise noted.
LARGE-SIGNAL STEP RESPONSE, G = 1, CL = 100pF
OPA244
OPA4244
2V/div
2V/div
OPA2244
50µs/div
25µs/div
SMALL-SIGNAL STEP RESPONSE, G = 1, CL = 100pF
OPA244
OPA4244
50mV/div
50mV/div
OPA2244
10µs/div
10µs/div
OFFSET VOLTAGE PRODUCTION DISTRIBUTION
30
12
OPA4244
OPA244
25
1800
1500
1200
900
600
300
0
–1500
1500
1300
900
1100
700
500
300
–100
0
100
–300
–500
–700
0
–900
0
–1100
5
–1300
2
–300
10
–600
4
15
–900
6
20
–1200
Percent of Amplifiers (%)
OPA2244
8
–1500
Percent of Amplifiers (%)
10
Offset Voltage (µV)
Offset Voltage (µV)
®
9
OPA244, 2244, 4244
TYPICAL PERFORMANCE CURVES (Cont.)
At TA = 25°C, VS = +15V, and RL = 20kΩ connected to Ground, unless otherwise noted.
OFFSET VOLTAGE PRODUCTION DISTRIBUTION
70
OPA244
60
OPA2244
50
35
Percent of Amplifiers (%)
Percent of Amplifiers (%)
30
25
20
15
10
40
30
20
5
10
0
0
0
1
2
3
4
5
6
7
8
9
10
0
VOS Drift (µV/°C)
0.5
1
1.5
2
2.5
3
3.5
VOS Drift (µV/°C)
®
OPA244, 2244, 4244
OPA4244
10
4
4.5
5.0 5.5
APPLICATIONS INFORMATION
This allows a designer to have the same assured performance at any supply voltage within this range. In addition,
many key parameters are guaranteed over the specified
temperature range, –40°C to +85°C. Most behavior remains
unchanged throughout the full operating voltage range. Parameters which vary significantly with operating voltage or
temperature are shown in typical performance curves.
The OPA244 is unity-gain stable and suitable for a wide
range of general purpose applications. Power supply pins
should be bypassed with 0.01µF ceramic capacitors.
OPERATING VOLTAGE
The OPA244 can operate from single supply (+2.2V to
+36V) or dual supplies (±1.1 to ±18V) with excellent
performance. Unlike most op amps which are specified at
only one supply voltage, the OPA244 is specified for real
world applications; a single set of specifications applies
throughout the +2.6V to +36V (±1.3 to ±18V) supply range.
Useful information on solder pad design for printed circuit
boards can be found in Burr-Brown's Application Bulletin
AB-132B, “Solder Pad Recommendations for SurfaceMount Devices,” easily found at Burr-Brown's web site
(http://www.burr-brown.com).
RH
10Ω
To Load
IH
R1
38.3kΩ
R5
383kΩ
High-Side
Current Sense
R3
38.3kΩ
V+
–In
A1
+In OPA244
V+ for A1, A2
R4
20kΩ
+
2.2V to 36V
(±1.1V to ±18V)
R8
100kΩ
Out
VO = 10 • IH • RH
V–
R2
19.1kΩ
R2 and R4 divide down the
common-mode input to A1.
V– for A1, A2
V+
–In
A2
+In OPA244
V–
R7
9.09kΩ
R6
10kΩ
RL
10Ω
Out
VO = 10 • IL • RL
Low-Side
Current Sense
Common-mode range of A2
extends to V– for low-side sensing.
Optional for IB Cancellation
(R7 = R6 II R8)
To Load
IL
NOTE: Low and high-side sensing circuits can be used independently.
FIGURE 1. Low and High-Side Battery Current Sensing.
®
11
OPA244, 2244, 4244
PACKAGE OPTION ADDENDUM
www.ti.com
18-Oct-2013
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Device Marking
(4/5)
OPA2244EA/250
ACTIVE
VSSOP
DGK
8
250
Green (RoHS
& no Sb/Br)
CU NIPDAU |
CU NIPDAUAG
Level-2-260C-1 YEAR
-40 to 85
A44
OPA2244EA/250G4
ACTIVE
VSSOP
DGK
8
250
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
-40 to 85
A44
OPA2244EA/2K5
ACTIVE
VSSOP
DGK
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU |
CU NIPDAUAG
Level-2-260C-1 YEAR
-40 to 85
A44
OPA2244EA/2K5G4
ACTIVE
VSSOP
DGK
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
-40 to 85
A44
OPA2244PA
ACTIVE
PDIP
P
8
50
Green (RoHS
& no Sb/Br)
CU NIPDAU
N / A for Pkg Type
OPA2244PA
OPA2244PAG4
ACTIVE
PDIP
P
8
50
Green (RoHS
& no Sb/Br)
CU NIPDAU
N / A for Pkg Type
OPA2244PA
OPA2244UA
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-3-260C-168 HR
OPA
2244UA
OPA2244UA/2K5
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-3-260C-168 HR
OPA
2244UA
OPA2244UA/2K5G4
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-3-260C-168 HR
OPA
2244UA
OPA2244UAG4
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-3-260C-168 HR
OPA
2244UA
OPA244NA/250
ACTIVE
SOT-23
DBV
5
250
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
A44
OPA244NA/250G4
ACTIVE
SOT-23
DBV
5
250
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
A44
OPA244NA/3K
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
A44
OPA244NA/3KG4
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
A44
OPA244PA
ACTIVE
PDIP
P
8
50
Green (RoHS
& no Sb/Br)
CU NIPDAU
N / A for Pkg Type
OPA244PA
OPA244PAG4
ACTIVE
PDIP
P
8
50
Green (RoHS
& no Sb/Br)
CU NIPDAU
N / A for Pkg Type
OPA244PA
OPA244UA
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-3-260C-168 HR
Addendum-Page 1
OPA
244UA
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
Orderable Device
18-Oct-2013
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Device Marking
(4/5)
OPA244UA/2K5
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-3-260C-168 HR
OPA
244UA
OPA244UA/2K5E4
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-3-260C-168 HR
OPA
244UA
OPA244UAE4
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-3-260C-168 HR
OPA
244UA
OPA4244EA/250
ACTIVE
TSSOP
PW
14
250
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-3-260C-168 HR
OPA
4244EA
OPA4244EA/250E4
ACTIVE
TSSOP
PW
14
250
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-3-260C-168 HR
OPA
4244EA
OPA4244EA/2K5
ACTIVE
TSSOP
PW
14
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-3-260C-168 HR
OPA
4244EA
OPA4244EA/2K5E4
ACTIVE
TSSOP
PW
14
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-3-260C-168 HR
OPA
4244EA
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3)
MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4)
There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5)
Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
Addendum-Page 2
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
18-Oct-2013
(6)
Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish
value exceeds the maximum column width.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 3
PACKAGE MATERIALS INFORMATION
www.ti.com
15-Feb-2014
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
B0
(mm)
K0
(mm)
P1
(mm)
W
Pin1
(mm) Quadrant
OPA2244EA/250
VSSOP
DGK
8
250
180.0
12.4
5.3
3.4
1.4
8.0
12.0
Q1
OPA2244EA/2K5
VSSOP
DGK
8
2500
330.0
12.4
5.3
3.4
1.4
8.0
12.0
Q1
OPA2244UA/2K5
SOIC
D
8
2500
330.0
12.4
6.4
5.2
2.1
8.0
12.0
Q1
OPA244NA/250
SOT-23
DBV
5
250
178.0
8.4
3.3
3.2
1.4
4.0
8.0
Q3
OPA244NA/3K
SOT-23
DBV
5
3000
178.0
8.4
3.3
3.2
1.4
4.0
8.0
Q3
OPA244UA/2K5
SOIC
D
8
2500
330.0
12.4
6.4
5.2
2.1
8.0
12.0
Q1
OPA4244EA/250
TSSOP
PW
14
250
180.0
12.4
6.9
5.6
1.6
8.0
12.0
Q1
OPA4244EA/2K5
TSSOP
PW
14
2500
330.0
12.4
6.9
5.6
1.6
8.0
12.0
Q1
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
15-Feb-2014
*All dimensions are nominal
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
OPA2244EA/250
VSSOP
DGK
OPA2244EA/2K5
VSSOP
DGK
8
250
210.0
185.0
35.0
8
2500
367.0
367.0
35.0
OPA2244UA/2K5
SOIC
D
8
2500
367.0
367.0
35.0
OPA244NA/250
SOT-23
DBV
5
250
565.0
140.0
75.0
OPA244NA/3K
SOT-23
DBV
5
3000
565.0
140.0
75.0
OPA244UA/2K5
SOIC
D
8
2500
367.0
367.0
35.0
OPA4244EA/250
TSSOP
PW
14
250
210.0
185.0
35.0
OPA4244EA/2K5
TSSOP
PW
14
2500
367.0
367.0
35.0
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products
Applications
Audio
www.ti.com/audio
Automotive and Transportation
www.ti.com/automotive
Amplifiers
amplifier.ti.com
Communications and Telecom
www.ti.com/communications
Data Converters
dataconverter.ti.com
Computers and Peripherals
www.ti.com/computers
DLP® Products
www.dlp.com
Consumer Electronics
www.ti.com/consumer-apps
DSP
dsp.ti.com
Energy and Lighting
www.ti.com/energy
Clocks and Timers
www.ti.com/clocks
Industrial
www.ti.com/industrial
Interface
interface.ti.com
Medical
www.ti.com/medical
Logic
logic.ti.com
Security
www.ti.com/security
Power Mgmt
power.ti.com
Space, Avionics and Defense
www.ti.com/space-avionics-defense
Microcontrollers
microcontroller.ti.com
Video and Imaging
www.ti.com/video
RFID
www.ti-rfid.com
OMAP Applications Processors
www.ti.com/omap
TI E2E Community
e2e.ti.com
Wireless Connectivity
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2014, Texas Instruments Incorporated
Similar pages