DDK 17LE-13150-28D2BB-FA

D-Sub Right Angle DIP Termination
17LE Series
17LE-13150-2 □ -FA
17LE-23250-2 □ -FA
17LE-13370-2 □ -FA
FEATURES
・17LE series are connected to a circuit by through hole DIP solder termination style mounting
on PCB and fastened on the bracket by stud or jack socket.
・Number of contact : 9, 15, 25 and 37
・Studs and hex nuts are available to fasten with mating half. This connection with PCB and
metal shell is grounding and improving the resistance against EMI.
・The metal shell is in Nickel plating. The pin connectors of metal shell are beat-finished.
・4 types of ground tabs are mountable on the bracket for protection against EMI.
SPECIFICATIONS
Rated Voltage
300V AC (r.m.s.)
Rated Current
5A / Contact
Dielectric Withstanding Voltage
1000V AC (r.m.s.) / 1 minute
Insulation Resistance
1000M Ω (min.) at 500V DC
Contact Resistance
15m Ω (max.)
Operating Temperature
-25℃∼ 85℃
MATERIAL / FINISH
RoHS
Compliant
Compliant
Item
Material / Finish
Insulator
Polyamide Resin (UL94V-0)/ Black
Shell
Steel / Ni Plating
Contact
Eyelet
Copper Alloy / Contact Area: Au(0.4 μ m) over Ni Plating
Tail Area: Sn-Ag Plating over Ni Plating
Brass / Ni Plating
◎ Specifications and/or dimenssions in this catalogue are subject to change without notice.
Your catalogue checking the latest speifications with our drawings would be highly appreciated.
090703
http://www.ddknet.co.jp
17LE Series
Unit:mm
○ Right Angle Socket Connectors
17LE-13250-27(D3AB)-FA
FA: Lead Free
Mating Style
1: Socket Connector
Deviation
No Digit: Connector Only
Shell Plating
3: Ni Plating
(D3AB)
Number of Contact
9, 15, 25, 37
Key Position
0: No Key
Grounding Tab (Please refer to page 4.)
No Digit: Less Grounding Tab
B:with Ground Tab 17L-004B
C:with Board Lock 17L-004C-FA
D:with Ground Tab 17L-004D
※ Ground tab B and D can not be combined
with stud.
Thread Size
A:M2.6 0.45
B:M3 0.5
C:# 4-40UNC
Contact Tail Style
2: Right Angle DIP Termination
Contact Plating
6: Contact Area: Au(0.8 μ m) over Ni Plating
Tail Area: Sn-Ag over Ni Plating
7: Contact Area: Au(0.4 μ m) over Ni Plating
Tail Area: Sn-Ag over Ni Plating
8: Contact Area: Au(Flash) over Ni Plating
Tail Area: Sn-Ag over Ni Plating 2: with Stud Type1 (17L-002 □ )
3: with Jack Socket Type 2 (17L-003 □ 1)
4: with Jack Socket Type 3 (17L-003 □ 3)
・□ : Thread Type A, B, C
・Regarding the combinations of grounding tab,
stud and jack socket, please refer to the list on
page 6.
17LE-13xx0-27(D3xx)-FA
Socket Connector
A
B
D
(E)
J
(6.25)
Thread Size
(Refer to part number code)
(6.25)
0.3
1
(n+1)/2 Contact
No.1 Contact
0.1
2.28
Panel Mounting Dimensions(Rear Mounting)
12.6
E
F
0.1
0.1
n-φ1.0
0.1
Through Hole
2-φ3.2
Fixed with adhesive part
F
M3 0.5 Thread
0.1
DDK
1
n+1
2
6.25
n
Contact No.
D
0.1
B
0.1
PCB Mounting Dimensions (Applicable PCB Thickness:t=1.
6
(View from mounting pattern side)
Section Y−Y 3.2
n+3
2
2.84
0.1
M3 0.5 Thread
0.5
G
0.8
2.84
2.84
0.5
9.6
6.1
0.3
B
6.4
Y
(B)
4-R2.5
R
Y
(9.6)
X
10.0 0
7.8
12.5
n
X
+0.3
2.84
6.5
0.7
H
0.2
(n+3)/2 Contact
+0.3
0
No.n Contact
C
Number of
Contact
A
B
C
D
E
F
G
H
J
9
30.80
24.99
16.80
10.98
1.37
2.74
8.22
18.50
31.00
15
39.10
33.32
25.12
19.20
1.37
2.74
16.44
26.80
39.30
25
53.04
47.04
38.84
33.12
1.38
2.76
30.36
40.70
53.20
37
69.32
63.50
55.30
49.68
1.38
2.76
46.92
57.00
69.50
◎ Specifications and/or dimenssions in this catalogue are subject to change without notice.
Your catalogue checking the latest speifications with our drawings would be highly appreciated.
http://www.ddknet.co.jp
2
0.19)
0.1
Through Hole
17LE Series
Unit:mm
○ Right Angle Plug Connectors
17LE-23250-27(D3AB)-FA
FA: Lead Free
Connector Type
2: Plug Connector
Deviation
No Digit: Connector Only
Shell Plating
3: Ni Plating
(D3AB)
Number of Contact
9, 15, 25, 37
Key Position
0: No Key
Contact Tail Style
2: Right Angle DIP Termination
Grounding Tab (Please refer to page 4.)
No Digit: Less Grounding Tab
B:with Ground Tab 17L-004B
C:with Board Lock 17L-004C-FA
D:with Ground Tab 17L-004D
※ Ground tab B and D can not be combined
with stud.
Thread Size
A:M2.6 0.45
B:M3 0.5
C:# 4-40UNC
Contact Plating
6: Contact Area: Au(0.8 μ m) over Ni Plating
Tail Area: Sn-Ag over Ni Plating
7: Contact Area: Au(0.4 μ m) over Ni Plating
Tail Area: Sn-Ag over Ni Plating
8: Contact Area: Au(Flash) over Ni Plating
Tail Area: Sn-Ag over Ni Plating 2: with Stud Type1 (17L-002 □ )
3: with Jack Socket Type 2 (17L-003 □ 1)
4: with Jack Socket Type 3 (17L-003 □ 3)
・□ : Thread Type A, B, C
・Regarding the combinations of grounding tab,
stud and jack socket, please refer to the list on
page 6.
17LE-23xx0-27(D3xx)-FA
Plug Connector
A
B
C
+0.3
0
J
Thread Size
(Refer to part number code.)
0.7
(E)
(6.25)
H
(6.25)
0.3
0.2
D
6.5
No.n Contact
+0.3
4-R2.5
No.1 Contact
R
(n+1)/2 Contact
B
F
n+3
2
0.1
Through Hole
2-φ3.2
0.1
2.28
F
0.1
6.25
1
SectionY−Y D
0.1
B
0.1
PCB Mounting Dimensions (Applicable PCB Thickness:t=1.
6
(View from mounting pattern side)
3.2
n
0.5
M3 0.5 Thread
DDK
n+1
2
E
n-φ1.0
0.1
0.1
Through Hole
0.1
Fixed with adhesive part
G
2.84
M3 0.5 Thread
Contact No.
2.84
0.8
(9.6)
5.9
Y
(B)
0.1
Panel Mounting Dimensions(Rrear Mounting)
12.6
9.6
0.5
0.3
6.4
Y
2.84
X
10.0 0
8.25
n
1
X
12.5
2.84
(n+3)/2 Contact
Number of
Contact
A
B
C
D
E
F
G
H
J
9
30.80
24.99
16.80
10.98
1.37
2.74
8.22
18.50
31.00
15
39.10
33.32
25.12
19.20
1.37
2.74
16.44
26.80
39.30
25
53.00
47.04
38.84
33.12
1.38
2.76
30.36
40.70
53.20
37
69.30
63.50
55.30
49.68
1.38
2.76
46.92
57.00
69.50
◎ Specifications and/or dimenssions in this catalogue are subject to change without notice.
Your catalogue checking the latest speifications with our drawings would be highly appreciated.
http://www.ddknet.co.jp
3
0.19)
17LE Series
Unit:mm
○ Ground Tab
Ground Tab for 17LE
Ground tab enables 17LE series to ground to PCB easily.
Ground Tab with Tapping Hole
Part Number : 17L-004B
Material / Finish: Steel / Ni Plating
※ Combination of stud 17L-002 □ is not available.
Thread M3 0.5
Ground Tab with Board Lock
Part Number : 17L-004C-FA
Material / Finish: Copper Alloy / Sn-Ag Plating
Thread M3 0.5
Ground Tab with Thrugh Hole
Part Number : 17L-004D
Material / Finish: Steel / Ni Plating
※ Combination of stud 17L-002 □ is not available.
φ 3.2 Hole
◎ Specifications and/or dimenssions in this catalogue are subject to change without notice.
Your catalogue checking the latest speifications with our drawings would be highly appreciated.
http://www.ddknet.co.jp
4
17LE Series
Unit:mm
○ Mounting on Panel and PCB
Panel MountingDimensions
(□ : Thread Size)
K min.
Stud
Pan-head
13.0 min.
Type 1
Panel
Connector
Screw
4-R1.0
Stud (17L-002 □ )
※ Connector can not be fastened
on the panel.
Hex Nut
M3 0.5 Thread
0.3
Connector
4-R2.5
R
6.5
Jack Socket
+0.3
0
0.2
6.5
6.1
J +0.3
0
H
10.0
Type 2
B
0.1
※ Connector can not be fastened
Jack Socket
(17L-003 □ 1)
on the panel.
Type 3
4.8
Hex Nut
2-φ3.2
4-R3.4
Connector
Jack Socket
7.8
11.4 min.
M3 0.5 Thread
Applicable PCB Thickness
1.6 0.19
10
C min.
B 0.1
※ Connector can be fastened
on the panel.
(Panel Thickness:0.8 ∼ 1.3)
Jack Socket
(17L-003 □ 3)
□:
A:
B:
C:
0.1
Number of
Thread SIze
M2.6 0.45
M3 0.5
#4-40UNC
B
C
H
J
K
24.99
16.30
18.50
31.0
34.09
15
33.32
24.64
26.80
39.3
42.42
25
47.04
38.35
40.70
53.2
56.14
37
63.50
54.80
57.00
69.5
72.60
Contact
9
Ground Tab
Ground Tab
Ground Tab
(Board Lock)
Screw
(not attached)
G
0.1
0.1
n-φ1.0
0.1
Through Hole
2-φ3.2
0.1
Through Hole
Number of
B
D
E
F
G
0.1
F
9
24.99
10.98
1.37
2.74
8.22
2.84
E
15
33.32
19.20
1.37
2.74
16.44
25
47.04
33.12
1.38
2.76
30.36
37
63.50
49.68
1.38
2.76
46.92
Contact
F
0.1
D
0.1
B
0.1
PCB Mounting Dimensions (Applicable PCB Thickness:t=1.
6
(View from mounting pattern side)
0.19)
◎ Specifications and/or dimenssions in this catalogue are subject to change without notice.
Your catalogue checking the latest speifications with our drawings would be highly appreciated.
http://www.ddknet.co.jp
5
17LE Series
Unit:mm
○ 17LE Series Mounting Accessories Deviation
※ ASSEMBLED: The mounting accessories are assembled with connector.
ATTACHED: The mounting accessories are attached separately.
17LE-13 □□ 0-27-FA
17LE-23 □□ 0-27-FA
17L-004B
17L-004D
17L-004C-FA
17L-004E-FA
Ground Tab
Part Number
t=1.6
None
t=1.6
M3 0.5
Panel
Mounting
t=1.6
M3 0.5
φ3.2 Hole
t=0.8
M3 0.5
φ3.2 Hole
Stud
Jack Socket
Operation
Part Number
Press in ground tab
17L-004E-FA
None
Type 1
17LE- □ 3 □□ 0-27(D41)-FA
Stud
17L-002 □ and panhead screw(L=6) are
ASSEMBLED.
17L-002 □
Connector can not
be fastened on the
panel.
Ground tab
17L-004C-FA is
fastened by stud
17L-002 □ and panhead screw (L=7).
17LE- □ 3 □□ 0-27(D2 □ )-FA
17LE-□3□□0-27(D2□C)-FA
Type 2
Connector can not
be fastened on the
panel.
To prevent
loosening, screws
are locked by
adhesive.
17L-003 □ 1
Jack socket
Press in ground tab Press in ground tab Ground tab
17L-003 □ 1 and
17L-004B and jack
hex nut(M3) are
socket 17L-003 □ 1 socket 17L-003 □ 1 fastened by jack
ASSEMBLED.
is ASSEMBLED.
17L-004D and jack
is ASSEMBLED.
17L-004C-FA is
socket 17L-003 □ 1
and hex nut(M3).
17LE- □ 3 □□ 0-27(D3 □ )-FA 17LE-□3□□0-27(D3□B)-FA 17LE-□3□□0-27(D3□D)-FA
6.1
Press in ground tab
17L-004E-FA and
jack socket 17L-003
□ 1 is ASSEMBLED.
17LE-□3□□0-27(D3□H)-FA
Press in ground
17LE-□3□□0-27(D3□C)-FA tab 17L-004E-FA
6.5
and 17L-003 □ 1 is
ATTCHED.
M3
17LE-□3□□0-27(D3□K)-FA
Type 3
Connector can be
fastened on the
panel.
Panel thickness:
1.3 max.
Jack socket
17L-003 □ 3
17L-003 □ 3 and
hex nut(M3) are
ASSEMBLED.
4.8
7.8
Press in ground tab Press in ground tab Ground tab
17L-004B and jack 17L-004D and jack 17L-004C-FA is
socket 17L-003 □ 3 socket 17L-003 □ 3 fastened by jack
socket 17L-003 □ 3
is ASSEMBLED.
is ASSEMBLED.
and hex nut(M3).
17LE- □ 3 □□ 0-27(D4 □ )-FA 17LE-□3□□0-27(D4□B)-FA 17LE- □ 3 □□ 0-27(D4 □□ )-FA
17LE-□3□□0-27(D4□C)-FA
M3
Press in ground tab
17L-004E-FA and
jack socket 17L-003
□ 3 is ASSEMBLED.
17LE-□3□□0-27(D4□H)-FA
Press in ground
tab17L-004E-FA
and 17L-003 □ 3 is
ATTACHED.
17LE-□3□□0-27(D4□K)-FA
Not available
Recommended
□ : Thread Size (Stud) A:M2.6 0.45
B:M3 0.5
C:# 4-40UNC
※ Above list shows combinations of ground tab, stud and
jack socket. The deviation is given in parentesis in each
sections. Regarding the detail, please contact our sales.
◎ Specifications and/or dimenssions in this catalogue are subject to change without notice.
Your catalogue checking the latest speifications with our drawings would be highly appreciated.
http://www.ddknet.co.jp
6