FFMAF201 thru FFMAF207T Surface Mount Glass Passivated Junction Fast Recovery Rectifiers Reverse Voltage 50 to 1000V Forward Current 2.0A FEATURES * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 * High temperature metallurgically bonded construction * Cavity-free glass passivated junction * Capable of meeting environmental standards of MIL-S-19500 * Typical IR less than 1.0µA * High temperature soldering guaranteed: 260°C/10 seconds Mechanical Data Case: JEDEC SMA-FL, molded plastic over glass DIE We declare that the material of product is Terminals: Plated leads, solderable per Haloggen free (green epoxy compound) MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.0327g Handling precautin:None Electrical Characteristic 1.Maximum & Thermal Characteristics Ratings Parameter Symbol symbol Device marking code at 25°C ambient temperature unless otherwise specified. FFMAF 201 FFMAF 202 FFMAF 203 FFMAF 204 FFMAF 205 FFMAF 206 FFMAF 207 FFMAF 207P FFMAF 207T FF27 FF27P FF27T Unit FF21 FF22 FF23 FF24 FF25 FF26 Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 Maximum RMS voltage VRMS 35 70 140 280 420 560 700 700 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 1000 1000 V Maximum average forward rectified current lead length at TC = 75°C(Note 2) IF(AV) 2.0 A Peak forward surge current 8.3ms single half sinewave superimposed on rated load (JEDEC Method) IFSM 60 A Typical reverse recovery time (Note 1) trr 150 500 250 Operating junction temperature range RθJA RθJC TJ 150 25 –55 to +150 storage temperature range TSTG –65 to +175 Typical thermal resistance (Note 2) 1000 1000 250 1000 160 V ns °C/W °C °C Electrical Characteristics Ratings at 25°C ambient temperature unless otherwise specified. Parameter Symbol symbol FFMAF 201 FFMAF 202 FFMAF 203 FFMAF 204 FFMAF 205 FFMAF 206 FFMAF 207 FFMAF 207P FFMAF 207T Unit Maximum instantaneous forward voltage at 2.0A VF 1.3 V Maximum DC reverse current TJ= 25°C at rated DC blocking voltage TJ = 125°C IR 5.0 100 µA Typical junction capacitance at 4.0V, 1MHz (Note 2) CJ 15.0 PF NOTES: 1. IF = 0.5A, IR = 1.0A, IRR = 0.25A 2. 8.0mm2 (.013mm thick) land areas FFMAF201 thru FFMAF207T 2. Characteristic Curves ( TA = 25°C unless otherwise noted ) Fig. 2 – Maximum Non-repetitive Peak Forward Surge Current 2.0 1.0 0.375" (9.5mm) Lead Length 0 0 Instantaneous Forward Current (A) 25 50 75 100 125 Case Temperature, °C TJ = TJ max 8.3ms Single Half Sine-wave (JEDEC Method) 60 30 0 150 175 1 Fig 3. – Typical Instantaneous Forward Characteristics 10 10 Number of Cycles at 60Hz 100 Fig 4. – Typical Reverse Characteristics 100 1.0 10 0.1 TJ = 25°C Pulse width = 300µs 1% Duty Cycle 0.01 0.001 0.6 1.0 Tj=75℃ 0.1 Tj=25℃ 0.01 0.8 1.0 1.2 1.4 Instantaneous Forward Voltage Fig 5. –typical transient thermal impedance Tj=125℃ 1.6 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Fig 6. – Typical Junction Capacitance 100 Junction Capacitance (pF) 1000 Transient thermal impedance(°C/W) Average Forward Rectified Current (A) 60 Hz Resistive or Inductive Load Instantaneous Reverse Current (µA) Average Forward Rectified Current (A) Fig. 1 – Forward Current Derating Curve 100 10 10 1 0.01 0.1 1.0 10 t,Pulse duration,sec 100 1.0 0.1 TJ = 25°C f = 1.0 MHz Vsig = 50mVp-p 1 10 Reverse Voltage (V) FFMAF201 thru FFMAF207T 3. dimension: SMA-FL DIM A B C D E H J Suggested solder pad layout SMA-FL MILLIMETERS MIN MAX 4.4 4.8 1.3 1.5 3.3 3.7 2.3 2.7 0.90Typ 0.9 1.2 0.11 0.21 INCHES MIN MAX 0.173 0.189 0.051 0.059 0.130 0.146 0.091 0.106 0.035Typ 0.036 0.047 0.005 0.009 Title : DOC NO.： Power Diode SMD Package Pa cking Spec Version: 5 WI-258 Modification: 0 Page: 2 5.1 、SMD Packing Reel Spec & Packing Quantity 5.1.1 Reel Packing A. Reel Spec unit：mm SPEC SMA-FL 7" reel TO277 13" reel SOD123FL 7" reel SOD323HE 7" reel SMB-FL 13" reel A 177.0±2.0 330.0±2.0 177.0±2.0 177.0±2.0 330.0±2.0 B 54.0±0.5 75.0±0.5 50.0±0.5 50.0±0.5 75.0±0.5 C 13.0±0.5 13.0±0.5 13.0±0.5 13.0±0.5 13.0±0.5 W 13.2±0.2 13.2±0.2 9.4±1.5 9.4±1.5 13.2±0.2 Quantity/Reel 3K 5K 3K 3K 5K B. 13" reel packing box unit：mm A 335±5.0 size B 335±2.0 as per above packing Spec TO277 13" reel SMB-FL 13" reel Q'ty/Box 10K 10K C 40±1.0 Title : Power Diode SMD Package Packing Spec DOC NO.： WI-258 DOC NO.： WI-258 Page: 3 C. 7" reel packing box unit：mm SMA-FL SOD123FL SOD323HE A B C 186±2.0 139±2.0 185±2.0 as per above packing Q'ty/Box SMA-FL 30K SOD123FL 30K SOD323HE 30K D. reel packing carton unit：mm A 350±2.0 size B 340±2.0 C 350±2.0 as per above packing Spec TO277 13" reel SMB-FL 13" reel Q'ty/Carton 80K 80K unit：mm SMA-FL SOD123FL SOD323HE A B C 455±2.0 400±2.0 410±2.0 as per above packing Spec SMA-FL 7" reel SOD123-FL 7" reel SOD323HE 7" reel 5.1.2 Tape Spec A. Cover Tape unit：mm A SMA-FL SMB-FL TO277 B 9.5±0.10 SOD123FL 5.4±0.10 SOD323HE 0.062±0.007 Q'ty/Carton 360K 360K 360K Title : DOC NO.： Power Diode SMD Package Packing Spec Version: 5 WI-258 Modification: 0 Page: 4 B. Carrier Tape Do P2 Po t P1 A D1 A' Bo W F E B' B SEC.:B-B' Cathode(tape hole side） Ko Ao SEC.:A-A' Item W P1 E F D0 D1 P0 P2 10P0 A0 B0 K0 SOD323HE 8±0.3 4±0.1 1.75±0.1 3.5±.05 1.55±0.05 1.1±0.1 4±0.1 2±0.05 40±0.2 1.45±0.1 2.75±0.1 0.80±0.1 SOD123FL 8±0.3 4±0.1 1.75±0.1 3.5±.05 1.55±0.05 1.1±0.1 4±0.1 2±0.05 40±0.2 1.95±0.1 3.95±0.1 1.30±0.1 T 0.25±0.05 0.25±0.05 SMA-FL 12±0.3 4±0.1 1.75±0.1 5.5±.05 1.55±0.05 1.5±0.1 4±0.1 2±0.05 40±0.2 2.83±0.1 4.75±0.1 1.42±0.1 SMB-FL TO277 12±0.3 8±0.1 1.75±0.1 5.5±.05 1.55±0.05 1.5±0.1 4±0.1 2±0.05 40±0.2 4.3±0.1 6.8±0.1 1.35±0.1 12±0.3 8±0.1 1.75±0.1 5.5±0.05 1.55±0.05 1.55±0.05 4±0.1 2±0.05 40±0.2 3.8±0.1 5.75±0.1 1.4±0.1 0.25±0.05 0.25±0.05 0.25±0.05 Title : DOC NO.： Power Diode SMD Package Packing Spec Version: 5 WI-258 Modification: 0 Page: 5 5.2、SMD Power Diode General Packing Spec A. 7" reel all labels will be at cathode side of reel ； Ｂ C A C side front A:LRC label; B:Environment Label C:Halide free label B. 13" reel A Ｂ C Ｂ C A A:LRC label; B:Environment Labe C:Halide free label C.Tape lead: face anode side of the reel,upper side is the tape lead position. All labels are at cathode side of the reel. 标题: DOC NO.： Power Diode SMD Package Packing Spec Version: 5 Modification: 0 Page: C. Label Content ： LRC Label WI-258 6 Two-dimension code Manufacturing it P/N ` Lot No. Date code Maker Quantity lot: 140106049X: 140106---2014/1/6；049----lot number:49；X：product code Environment Label Halide-free Label Green FFMAF201 thru FFMAF207T 4. Update Record 版次 更新记录 更新作者 更新日期 1 第一版 周杰 2014.04.28