IRC TT M55342K09B1E00P Precision military qualified chip resistor Datasheet

Precision Military Qualified
Chip Resistors
MIL-CHIP Series
• 6 industry chip sizes available
• Thin and thick film technologies
• MIL-PRF-55342 Characteristics E, H, K, and M
• MIL-PRF-55342 extended reliability levels C, M, P, R, and S
The IRC military chip resistor series provides precision and stable
performance in six industry standard chip sizes. IRC now utilizes two
film technologies to expand our options in size, resistance range and tolerance. IRC’s proprietary thick film
technology provides extended range and lower cost while our exclusive thin film (TaNFilm® tantalum nitride)
technology provides precision and superior performance in the harshest moisture environment.
Electrical Data
Style
Size
Technology
MIL-PRF-55342
Characteristic
Style 12
RM0603
Thin Film
(TaNFilm®)
E, H, K, M
Style 06
RM0705
Thin Film
(TaNFilm®)
E, H, K, M
Style 04
RM1505
Thin Film
(TaNFilm®)
E, H, K, M
Style 07
RM1206
Thin Film
(TaNFilm®)
E, H, K, M
Style 07
RM1206
Thick Film
Style 08
RM2010
Style 09
RM2512
Tolerance
Resistance
Range
(Ω)
±0.1%
100R - 59K
±1%, ±2%, ±5%, ±10%
10R0- 59K
±0.1%
100R - 125K
±1%, ±2%, ±5%, ±10%
10R0- 125K
±0.1%
100R - 125K
±1%, ±2%, ±5%, ±10%
10R0- 125K
±0.1%
100R - 125K
Power
Rating
(mW)
Voltage
Rating*
(V)
Reliability
Level
100
50
C, M, P,
R, S
150
50
C, M, P,
R, S
150
125
C, M, P,
R, S
250
100
±1%, ±2%, ±5%, ±10%
10R0- 125K
K, M
±1%, ±2%, ±5%, ±10%
5R62 - 10M
250
100
Thick Film
K, M
±1%, ±2%, ±5%, ±10%
5R62 - 15M
800
150
Thick Film
K, M
±1%, ±2%, ±5%, ±10%
5R62 - 15M
1000
200
Termination
Type
Type `B´
Sn/Pb solder
over nickel
barrier
C, M, P,
R, S
C, M,
P, R
General Note
IRC reserves the right to make changes in product specification without notice or liability.
All information is subject to IRC’s own data and is considered accurate at time of going to print.
© IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA
Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com
A subsidiary of
TT electronics plc
MIL-CHIP Series Issue January 2009 Sheet 1 of 3
Precision Military Qualified
Chip Resistors
Environmental Data
Thick Film Performance
Environmental Test
MIL-PRF-55342
Thin Film Performance
MIL-PRF-55342
Characteristic K
Typical IRC ∆R
MIL-PRF-55342
Characteristic H
Typical IRC ∆R
Thermal Shock
±0.5%
±0.04%
±0.25%
±0.02%
Low Temperature Operation
±0.25%
±0.01%
±0.25%
±0.01%
Short-time Overload
±0.25%
±0.03%
±0.10%
±0.01%
High Temperature Exposure
±0.5%
±0.05%
±0.50%
±0.03%
Resistance to Solder
±0.25%
±0.09%
±0.25%
±0.01%
Moisture Resistance
±0.5%
±0.06%
±0.40%
±0.03%
Life
±2.0%
±0.10%
±2.0%
±0.03%
Physical Data
L
a
TOP
SIDE
BOTTOM
W
H
b
L
W
H
a
b
0603
0.063″ ±0.004
0.031″ ±0.004
0.020″ ±0.004
0.008″ ±0.004
0.008″ ±0.004
0805
0.081″ ±0.005
0.050″ ±0.005
0.020″ ±0.006
0.016″ ±0.008
0.016″ ±0.008
1505
0.155″ ±0.007
0.050″ ±0.005
0.025″ ±0.003
0.015″ ±0.008
0.015″ ±0.008
1206 (Thin Film)
0.126″ ±0.006
0.063″ ±0.005
0.024″ ±0.004
0.016″ ±0.008
0.016″ ±0.008
1206 (Thick Film)
0.126″ ±0.008
0.063″ ±0.005
0.024″ ±0.004
0.020″+0.005/
-0.010
0.020″+0.005/
-0.010
2010
0.209″ ±0.009
0.098″ ±0.005
0.028″ ±0.005
0.020″ ±0.005
0.020″ ±0.005
2512
0.259″ ±0.009
0.124″ ±0.005
0.028″ ±0.005
0.020″ ±0.005
0.020″ ±0.005
© IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA
Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com
MIL-CHIP Series Issue January 2009 Sheet 2 of 3
Precision Military Qualified
Chip Resistors
Ordering Data For Performance Specification MIL-PRF-55342
D55342
H
07
B
1E00
S
Military Designator
M55342 for styles RM0603, RM0705(0805), RM1505, RM2010 and RM2512
D55342 for style RM1206
Characteristic
E, H, K and M per MIL-PRF-55342
Specification Number
04 for style RM1505; 06 for style RM0705(0805); 07 for style RM1206
08 for style RM2010; 09 for style RM2512; 12 for style RM0603
Termination
Termination B per MIL-PRF-55342
Resistance and Tolerance
Resistance and tolerance code per MIL-PRF-55342
Product Level Designator
Product level C, M, P, R and S per MIL-PRF-55342
Packaging
Standard order packaging is 8mm or 12mm tape per EIA 481. Conductive waffle pack packaging is also available.
For additional information or to discuss your specific requirements,
please contact our Applications team using the contact details below.
© IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA
Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com
MIL-CHIP Series Issue January 2009 Sheet 3 of 3
Similar pages