Everlight ALS-PT204-6C/L177 3mm dip ambient light sensor Datasheet

3mm DIP
Ambient Light Sensor
ALS-PT204-6C/L177
Features
‧Close responsively to the human eye spectrum
‧Light to Current, analog output
‧Good output linearity across wide illumination range
‧Low sensitivity variation across various light sources
‧Operating temperature performance, -40 C to 85 C
‧Wide supply voltage range, 2.5V to 5.5V
‧Size : 3mm Lamp
‧RoHS compliant and Pb Free package
o
o
Description
The ALS-PT204-6C/L177 is consisting of a phototransistor in 3mm lamp. EVERLIGHT ALS series
products are good effective solution to the power saving of display backlighting of mobile
appliances, such as the mobile phones, NB and PDAs. Due to the high rejection ratio of infrared
radiation, the spectral response of the ambient light sensor is close to human eyes.
Applications
‧Detection of ambient light to control display backlighting
Mobile devices – mobile phones, PDAs
Computing device – TFT LCD monitor for Notebook computer
Consumer device – TFT LCD TV, video camera, digital camera, toys
‧Automatic residential and commercial management
‧Automatic contrast enhancement for electronic signboard
‧Ambient light monitoring device for daylight and artificial light
– Street light, CCD/CCTV
Everlight Electronics Co., Ltd.
Document No: DAS-020-005 Rev1.1
1
http:\\www.everlight.com
Dec. 31, 2007
3mm DIP
Ambient Light Sensor
ALS-PT204-6C/L177
Package Dimensions
Notes: 1.All dimensions are in millimeters
2. Tolerances unless dimensions ±0.1mm
Everlight Electronics Co., Ltd.
Document No: DAS-020-005 Rev1.1
2
http:\\www.everlight.com
Dec. 31, 2007
3mm DIP
Ambient Light Sensor
ALS-PT204-6C/L177
Absolute Maximum Ratings (Ta=25℃
℃)
Parameter
Symbol
Rating
Unit
Vcc
-0.5~6.0
V
Operating Temperature Range
Topr
-40 ~ +85
°C
Storage Temperature Range
Tstg
-40 ~ +100
°C
Soldering Temperature Range [Note1]
Tsol
260 ± 10
°C
Supply Voltage
[Note1]
Note1: For detail reflow time and the recommended temperature profile, please refer to page 8.
Recommended Operating Conditions (Ta=25℃
℃)
Parameter
Symbol
Min.
Max.
Unit
Operating Temperature
Topr
-40
+85
°C
Supply Voltage
Vcc
2.5
5.5
V
Everlight Electronics Co., Ltd.
Document No: DAS-020-005 Rev1.1
3
http:\\www.everlight.com
Dec. 31, 2007
3mm DIP
Ambient Light Sensor
ALS-PT204-6C/L177
Electrical and Optical Characteristics (Ta=25℃
℃)
Parameter
Symbol
MIN.
TYP.
ICEO
---
VCE(sat)
IPH1
Dark Current
Collector-Emitter
Saturation Voltage
Light Current
Photocurrent Ratio
Unit
---
MA
X.
0.1
uA
VCE=10V, Ev= 0Lux
---
---
0.4
V
IC=2mA, Ev= 1000Lux
100
200
---
uA
VCE=5V, Ev= 100Lx
---
uA
VCE=5V, Ev= 1000Lx
---
uA
Test Condition
[Note1]
IPH2
1000
IPH3
1800
2000
0
3600
---
1.8
---
---
VCE=5V, Ev= 1000Lx
4.5
4.6
---
V
Vcc=5V, Ev= 1000Lx
RL=75K
IPH3 / IPH2
[Note1]
VCE=5V, Ev= 1000Lx
[Note2]
Saturation Output
Voltage
Vo
Peak Sensitivity
λp
---
630
---
nm
λ
390
---
700
nm
Rise time
tr
---
0.11
---
ms
Fall time
tf
---
0.22
---
ms
2θ1/2
---
64
---
Deg.
[Note2]
Wavelength
Sensitivity
Wavelength Range
Angle of half
Sensitivity
VCC = 5 V
RL = 7.5KΩ
IF = 20 mA
Note:
1. White Fluorescent light (Color Temperature = 6500K) is used as light source. However, White LED is
substituted in mass production.
2. Illuminance by CIE standard illuminant-A / 2856K, incandescent lamp.
Everlight Electronics Co., Ltd.
Document No: DAS-020-005 Rev1.1
4
http:\\www.everlight.com
Dec. 31, 2007
3mm DIP
Ambient Light Sensor
ALS-PT204-6C/L177
Typical Electrical and Optical Characteristics Curves
Fig.1
Light Current vs. Illuminance
Fig.2
Output Voltage vs. Illuminance
10
100000
V CE= 5V
1
1000
Ouput Voltage Vo (V)
Light current (uA)
10000
100
10
1
0.1
0.01
o
Ta=25 C ; Vcc=5V
Fluorescent light RL=1KΩ
Fluorescent light RL=7.5KΩ
Fluorescent light RL=75KΩ
1E-3
0.1
0.01
0.1
1
10
100
1000
10000
1E-4
Illuminance (Lux)
1
10
100
1000
10000
Illuminance Ev (Lux)
Fig.3
Spectral Response
Fig.4
Light current vs. Supply Voltage
10000
VCE = 5V
EV = 100 Lux
Light current (uA)
1000
100
10
1
1
2
3
4
5
6
7
Supply voltage (V)
Fig.5
Light Current vs. Temperature
Fig.6
100000
10000
V CE = 5V
E V= 100 Lux
10000
VCE = 7V
EV = 0 Lux
1000
Dark current (nA)
Light current (uA)
1000
Dark Current vs. Temperature
100
10
100
10
1
0.1
1
-60
-40
-20
0
20
Temperature (
40
℃)
Everlight Electronics Co., Ltd.
Document No: DAS-020-005 Rev1.1
60
80
0.01
-60
100
-40
-20
0
20
40
Temperature (
5
℃)
60
80
100
http:\\www.everlight.com
Dec. 31, 2007
3mm DIP
Ambient Light Sensor
ALS-PT204-6C/L177
Converting Photocurrent to Voltage
Vcc
Light
Source
Iph
Vout
RL
CL
GND
Note:
1. The output voltage (Vout) is the product of photocurrent (IPH) and loading resistor (RL)
2. A right loading resistor shall be chosen to meet the requirement of maximum ambient light,
and output saturation voltage:
Vout(max.) = Iout(max.) × RL ≦ Vout(saturation)=Vcc-0.4V
Everlight Electronics Co., Ltd.
Document No: DAS-020-005 Rev1.1
6
http:\\www.everlight.com
Dec. 31, 2007
3mm DIP
Ambient Light Sensor
ALS-PT204-6C/L177
Recommended method of storage
Reflow Terms:
JEDEC Level 4 Specification
Dry box storage is recommended as soon as the aluminum bag has been opened prevent
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift might cause
big current happen. (Burned-out might happen).
2. Storage
(1) Do not open moisture proof bag before components are ready to use.
℃ or less and
(2) Before opening moisture proof bag, components should be kept at 30
90%RH or less.
(3) Components should be used within a year.
℃ or less and
(4) After opened moisture proof bag, components should be kept at 30
70%RH or less.
(5) Components should be used within 168 hours after opened moisture proof bag.
(6) If the moisture absorbent material (silica gel) has faded away or the components
have exceeded the storage time, baking treatment should be performed using the
℃ for 24 hours)
following conditions. (Baking treatment: 60±5
ESD Precaution:
Proper storage and handing procedures should be followed to prevent ESD damage to
the devices especially when they are removed from the Anti-static bag. Electro-Static
Sensitive Devices warning labels are on the packing.
Everlight Electronics Co., Ltd.
Document No: DAS-020-005 Rev1.1
7
http:\\www.everlight.com
Dec. 31, 2007
3mm DIP
Ambient Light Sensor
ALS-PT204-6C/L177
Recommended Solder Profile
Notice:
(1) Reflow soldering should not be done more than two times.
(2) When soldering, do not put stress on the devices during heating.
(3) After soldering, do not warp the circuit board.
Soldering Iron
℃
Each terminal is to go to the tip of soldering iron temperature less than 350
for 3
seconds within once in less than the soldering iron capacity 25W. Leave two seconds and
more intervals, and do soldering of each terminal. Be careful because the damage of the
product is often started at the time of the hand solder.
Everlight Electronics Co., Ltd.
Document No: DAS-020-005 Rev1.1
8
http:\\www.everlight.com
Dec. 31, 2007
3mm DIP
Ambient Light Sensor
ALS-PT204-6C/L177
Packing Quantity Specification
1.500PCS/1Bag,5Bags/1Box
2.10Boxes/1Carton
Label Format
xxxxxx
xxxxxx
RoHS
xxxxxxxxxxxx
xxxx
xxxxxxxx
Everlight Electronics Co., Ltd.
Document No: DAS-020-005 Rev1.1
9
http:\\www.everlight.com
Dec. 31, 2007
3mm DIP
Ambient Light Sensor
ALS-PT204-6C/L177
Notes
1. Above specification may be changed without notice. EVERLIGHT will reserve authority on
material change for above specification.
2. When using this product, please observe the absolute maximum ratings and the instructions
for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for
any damage resulting from use of the product which does not comply with the absolute
maximum ratings and the instructions included in these specification sheets.
3. These specification sheets include materials protected under copyright of EVERLIGHT
corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s
consent.
Everlight Electronics Co., Ltd.
Document No: DAS-020-005 Rev1.1
10
http:\\www.everlight.com
Dec. 31, 2007
Similar pages