Microsemi HSMBJSAC7.0 500 watt low capacitance transient voltage suppressor Datasheet

HSMBJSAC5.0 thru HSMBJSAC50
500 WATT LOW CAPACITANCE
TRANSIENT VOLTAGE SUPPRESSOR
SCOTTSDALE DIVISION
APPEARANCE
The HSMBJSAC transient voltage suppressor (TVS) series rated at 500
Watts provides an added rectifier element as shown in Figure 4 to achieve
low capacitance in applications for data or signal lines. The low capacitance
rating of less than 30 pF may be used for protecting higher frequency
applications in inductive switching environments or electrical systems
involving secondary lightning effects per IEC61000-4-5 as well as
RTCA/DO-160D or ARINC 429 for airborne avionics. If bidirectional
protection is needed, two HSMBJSAC devices in anti-parallel configuration
are required as shown in Figure 6. With their very fast response time, they
also provide ESD and EFT protection per IEC61000-4-2 and IEC61000-4-4
respectively.
DO-214AA
See package notes
WWW . Microsemi .C OM
DESCRIPTION
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES
•
•
•
•
•
•
•
APPLICATIONS / BENEFITS
Unidirectional low-capacitance TVS series (for
bidirectional see Figure 6)
Suppresses transient up to 500 Watts Peak Pulse
Power @ 10/1000 µs
Improved performance in low capacitance of 30 pF
Economical small plastic surface mount with robust
axial subassembly package
Options for screening in accordance with MIL-PRF19500 for JAN, JANTX, JANTXV, and JANS are
also available by adding MQ, MX, MV, or MSP
prefixes respectively to part number, e.g.
MXSAC5.0, MVSAC18, etc.
Also available in surface mount with SMAJ prefix
for part numbers (ex. SMAJSAC5.0)
UL94V-0 Flammability Classification
•
•
•
•
•
MAXIMUM RATINGS
•
•
•
MECHANICAL AND PACKAGING
o
Peak Pulse Power Dissipation at 25 C: 500 Watts @
10/1000 µs with repetition rate of 0.01% or less*
o
Steady State Power Dissipation* at TL = +75 C: 2.5
Watts.
Clamping Speed (0 volts to V(BR) Min.) less than 5
nanoseconds.
o
o
Operating and Storage Temperature: -65 C to +150 C.
•
•
•
CASE: Void Free Transfer Molded Thermosetting Plastic
(see DO-214AA dimensions and notes)
FINISH: All External Surfaces Are Corrosion Resistant and
Leads Solderable
POLARITY: Cathode (TVS) Marked with Band
MARKING: Part number without HSMBJ prefix (ie. SAC5.0)
•
WEIGHT: 0.1 Grams (Approx.)
•
* TVS devices are not typically used for dc power dissipation and are instead operated < VWM (rated standoff voltage) except for transients
that briefly drive the device into avalanche breakdown (VBR to VC region) of the TVS element. Also see Figures 5 and 6 for further
protection details in rated peak pulse power for unidirectional and bidirectional configurations respectively.
Copyright  2002
11-24-2003 REV A
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 1
HSMBJSAC5.0 thru
HSMBJSAC50
•
Low Capacitance for data-line protection to 70 MHz
Protection for aircraft fast data rate lines per select
level waveforms in RTCA/DO-160D & ARINC 429
ESD and EFT protection per IEC61000-4-2 and
IEC61000-4-4 respectively
Secondary lightning protection per IEC61000-4-5 with
42 Ohms source impedance:
Class 1: HSMBJSAC5.0 to HSMBJSAC50
Class 2: HSMBJSAC5.0 to HSMBJSAC45
Class 3: HSMBJSAC5.0 to HSMBJSAC22
Class 4: HSMBJSAC5.0 to HSMBJSAC10
Secondary lightning protection per IEC61000-4-5 with
12 Ohms source impedance
Class 1: HSMBJSAC5.0 to HSMBJSAC26
Class 2: HSMBJSAC5.0 to HSMBJSAC15
Class 3: HSMBJSAC5.0 to HSMBJSAC7.0
HSMBJSAC5.0 thru HSMBJSAC50
500 WATT LOW CAPACITANCE
TRANSIENT VOLTAGE SUPPRESSOR
SCOTTSDALE DIVISION
MICROSEMI
PART NUMBER
HSMBJSAC5.0
HSMBJSAC6.0
HSMBJSAC7.0
HSMBJSAC8.0
HSMBJSAC8.5
HSMBJSAC10
HSMBJSAC12
HSMBJSAC15
HSMBJSAC18
HSMBJSAC22
HSMBJSAC26
HSMBJSAC36
HSMBJSAC45
HSMBJSAC50
REVERSE
STAND-OFF
VOLTAGE
(Note 1)
VWM
Volts
5.0
6.0
7.0
8.0
8.5
10
12
15
18
22
26
36
45
50
BREAKDOWN
VOLTAGE
@ I(BR) 1.0mA
V(BR)
Volts
Min.
7.60
7.90
8.33
8.89
9.44
11.10
13.30
16.70
20.00
24.40
28.90
40.0
50.00
55.50
MAXIMUM MAXIMUM
STANDBY CLAMPING
CURRENT VOLTAGE
@VWM
IP = 5.0A*
ID
VC
µA
300
300
300
100
50
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
Volts
10.0
11.2
12.6
13.4
14.0
16.3
19.0
23.6
28.8
35.4
42.3
60.0
77.0
88.0
MAXIMUM
PEAK PULSE
CURRENT*
RATING
IPP
CAPACITANCE
@ O Volts
WORKING
INVERSE
BLOCKING
VOLTAGE
VWIB
INVERSE
BLOCKING
LEAKAGE
CURRENT
@ VWIB
PEAK
INVERSE
BLOCKING
VOLTAGE
VPIB
Amps
44
41
38
36
34
29
25
20
15
14
11.1
8.6
6.8
5.8
pF
30
30
30
30
30
30
30
30
30
30
30
30
30
30
Volts
75
75
75
75
75
75
75
75
75
75
75
75
150
150
IIB mA
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Volts
100
100
100
100
100
100
100
100
100
100
100
100
200
200
WWW . Microsemi .C OM
ELECTRICAL CHARACTERISTICS @ 25oC
*See Figure 3
Clamping Factor: The ratio of the numerical value of VC to V(BR) is typically 1.4 @ full rated power, 1.20 @ 50% rated power. Also see MicroNote 108.
Note 1: A transient voltage suppressor is normally selected according to voltage (VWM), that should be equal to or greater than the dc or continuous
peak operating voltage level.
Note 2: When pulse testing, test in TVS avalanche direction. Do not pulse in “forward” direction. See section for “Schematic Applications” herein.
.
GRAPHS
HSMBJSAC5.0 thru
HSMBJSAC50
tw – Pulse Width µs
FIGURE 1
Copyright  2002
11-24-2003 REV A
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 2
HSMBJSAC5.0 thru HSMBJSAC50
SCOTTSDALE DIVISION
500 WATT LOW CAPACITANCE
TRANSIENT VOLTAGE SUPPRESSOR
IPP – Peak Pulse Current - % IPP
% of Rated Power
WWW . Microsemi .C OM
Peak Power
(Single Pulse)
Average
Power
o
TL – Lead Temperature – C
t – Time – msec
FIGURE 2
FIGURE 3
Lead Length = 3/8”
SCHEMATIC APPLICATIONS
The TVS low capacitance device configuration is shown in Figure 4. As a further option for unidirectional applications, an additional low
capacitance rectifier diode may be used in parallel in the same polarity direction as the TVS as shown in in Figure 5. In applications where
random high voltage transients occur, this will prevent reverse transients from damaging the internal low capacitance rectifier diode and also
provide a low voltage conducting direction. The added rectifier diode should be of similar low capacitance and also have a higher reverse voltage
rating than the TVS clamping voltage VC. Consult factory for recommended rectifier part number. If using two (2) low capacitance TVS devices
in anti-parallel for bidirectional applications, this added protective feature for both directions (including the reverse of each rectifier diode) is also
provided. The unidirectional and bidirectional configurations in Figure 5 and 6 will both result in twice the capacitance of Figure 4.
PACKAGE
DIMENSIONS
FIGURE 5
Optional Unidirectional
configuration (TVS and
separate rectifier diode)
in parallel)
DIM
FIGURE 6 Optional Bidirectional
configuration (two TVS devices in
anti-parallel)
Copyright  2002
11-24-2003 REV A
A
B
C
D
E
F
G
HSMBJSAC5.0 thru
HSMBJSAC50
FIGURE 4
TVS with internal Low
Capacitance Diode
DIMENSIONS
INCHES
MILLIMETERS
MIN
MAX
MIN
MAX
.073
.160
.130
.205
.075
.030
.006
.087
.180
.155
.220
.130
.060
.016
1.85
4.06
3.30
5.21
1.91
.76
.15
2.21
4.57
3.94
5.59
3.30
1.52
.41
NOTE: Dimension E exceeds the
JEDEC outline in height as shown
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 3
Similar pages