Vishay A20P-CD Rack and panel connector Datasheet

A20 and WA20
Vishay Dale
Rack and Panel Connectors
Side Mount
FEATURES
WA20
• Body components available with any desired pin and
socket combination
• Floating contacts
• Polarization accomplished by reversed pin and socket
combination
• Model A20 has barriers for increased creepage distance
• Thru hole permits use of building block technique or flat
mounting
A20
MATERIAL SPECIFICATIONS
APPLICATIONS
indicated.
Standard Body: Glass-filled diallyl phthalate per ASTM D
5948-96 Green, Flame Retardant
Pin Contacts: Brass
Socket Contacts: Phosphor bronze
Contact Plating: Gold, 10 micro-inches
ELECTRICAL SPECIFICATIONS
PHYSICAL SPECIFICATIONS
Broad - limited only by those applications requiring physical,
electrical and/or materials specifications exceeding those
Minimum Creepage Path between Contacts:
A20 = 0.08" [2.03 mm]; WA20 = 0.05" [1.27 mm]
Minimum Air Space between Contacts:
A20 = 0.08" [2.03 mm]; WA20 = 0.05" [1.27 mm]
Contact, Center to Center: A20 = 0.150" [3.18 mm];
WA20 = 0.125" [3.17 mm]
Breakdown Voltage (Contact to Contact):
At sea level: 2000 V RMS
At 70 000 feet [21 336 meters]: 500 V RMS
Current Rating: 7.5 amps
DIMENSIONS in inches [millimeters]
A20P-CD
0.180
[4.57]
Contact Pin
0.093 [2.36]
Dia. Thru
Contact
Socket
0.150
[3.81]
Lettering on
Wire Side
Only
0.218
[5.54]
Solder Cups
Accommodate
#20 AWG Wire
0.040
[1.02]
Dia.
0.200
[5.08]
0.437
[11.10]
A
B
C
D
0.360
[9.14] 0.031
[0.79]
0.750
[19.05]
0.265
[6.73]
0.275
[6.99]
A20S-CD
0.200
[5.08]
0.040
[1.02]
Dia.
0.750
[19.05]
0.360
[9.14]
0.150
[3.81]
0.218
[5.54]
Solder Cups
Accommodate
#20 AWG Wire
0.437
[11.11]
Contact
Socket
0.093 [2.36]
Dia. Th?ru
www.vishay.com
12
Lettering on
Wire Side
Only
0.180
[4.57]
B
A
D
C
0.265
[6.73]
0.275
[6.99]
0.031
[0.79]
For technical questions, contact: [email protected]
Document Number: 36018
Revision: 08-Feb-07
A20 and WA20
Rack and Panel Connectors
Side Mount
Vishay Dale
DIMENSIONS in inches [millimeters]
WA20P-CD
0.093 [2.36]
Dia. Thru
0.170
[4.32]
Contact
Pin
0.220
[5.59]
82° C-sink
(Far Side)
Solder Cups
Accommodate
#20 AWG Wire
0.040
[1.02]
Dia.
0.220
[5.59]
Contact
Socket
0.125
[3.18]
0.440
[11.18]
A
B
DALE
WA20P
C
D
0.340
[8.64]
Lettering on
Wire Side
Only
0.281
[7.14]
0.250
[6.35]
0.750
[19.05]
WA20S-CD
0.220
[5.59]
0.040
[1.02]
Dia.
0.750
[19.05]
0.340
[8.64]
0.125
[3.18]
0.170
[4.32]
0.220
[5.59]
Solder Cups
Accommodate
#20 AWG Wire
0.440
[11.18]
A
DALE
WA20S
D
C
0.281
[7.14]
0.250
[6.35]
82° C-sink
0.172
[4.37]
B
Lettering on
Wire Side
Only
Contact
Socket
0.093 [2.36]
Dia. Thru
ORDERING INFORMATION
A20
WA20
P
AB
A
MODEL
BODY STYLE
CONTACT LOCATION
EMPTY CONTACT
POSITIONS
P - Designates pin style body.
S - Designates socket style body.
These designations are used to
identify mating connectors, however,
any combination of pin and socket
contacts may be ordered in either
style body. Therefore, when
designators 3 and 4 are the same,
a connector designated A20P or
WA20P will mate with a connector
designated A20S or WA20S.
Example:
A20P-CD mates with A20S-CD
A20S-AB mates with A20P-CD
Designates pin contact
positions in an A20P or
WA20P connector or socket
contact positions in an A20S
or WA20S connector
(specify “A”, “B”, “C”, “D” or
any combination of the four).
Specify by contact
identification letter
(A, B, etc.) any contact
positions which are to be
left empty (omit, if none
required).
EXAMPLE 2:
A20S-CD or WA20S-CD = Connector with
socket contacts in positions “C” and “D”
and pin contacts in positions “A” and “B”
(would mate with Example 1 at left).
EXAMPLE 3:
A20P-BC or WA20P-BC-A = Connector with pin contacts in
positions “B” and “C”,socket contact in position “D” and no
contact in position “A” (would mate with A20S-BC or
WA20S-BC-A).
Side Mount with 4 positions
for #20 AWG contacts.
EXAMPLE 1:
A20P-CD or WA20P-CD = Connector with
pin contacts in positions “C” and “D” and
socket contacts in positions “A” and “B”.
Document Number: 36018
Revision: 08-Feb-07
For technical questions, contact: [email protected]
www.vishay.com
13
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
Similar pages