Emcore OTS-1LT Wideband optical link Datasheet

OTS-1L
Wideband Optical Link
Optiva® SERIES Professional Media Transport
SATCOM
50MHz to 3000MHz Wideband Optical Link
Optiva® Wideband fiber-optic links are optimized to perform
in the 50 to 3000 MHz frequency range providing transparent
signal transportation for satellite antenna applications. The
unique features of the OTS-1LT series include simple push
button peaking for optimum performance and our
patent-pending SmartGain™ Control, which ensures consistent
performance over varied signal conditions. As with all Emcore
optical products, the highest quality components and modern production
Features
atures
„
„
techniques insure that intra-facility links provide the highest performance as a
50 to 3000 MHz optimized for IF, L and S band
cost-effective alternative to coaxial cable. They provide much longer
satellite signals
transmission distances than copper cables, simplify network design, ease
30dB adjustable gain range provides
installation and even enhance immunity from EMI, RFI and lightning. These
perfect level match for signal distribution
transmitters and receivers take the high RF performance and diverse features
of Emcore’s Ortel technology and combine them into a compact package
„
Unique peak optimizer and SmartGain™ control
„
50 & 75 Ohm BNC or 50 Ohm SMA
„
Tx & Rx RF power monitors via LED, SMA &
compatible with the Optiva® OT-CC-16 chassis.
System Design
Optiva® is a completely modular hot-swappable platform. Both 19” rack
remote
mount and compact tabletop or wall-mountable enclosures are available. The
„
LNB power
19” rack-mount enclosure (Model OT-CC-16) can support up to 16 insert cards
„
SNMP monitoring and control
and provides a single power supply (Model PS-200), or a dual-redundant,
„
High-dynamic-range, optically-isolated DFB
hot-swappable power supply option. Compact enclosures are available with
1, 2 or 4 slots. The one slot (OT-DTCR-1) and two slot (OT-DTCR-2) enclosures
lasers run cooler and require less power
„
„
both use an external power supply (PS-9012) and optionally have a standard
Fits in Optiva® enclosures, which support
2-pin DC power connector for more custom applications. The four-slot 1 RU
Daisy Chain™ video, audio and data links.
enclosure (OT-CC-4) uses an integrated power supply. The Optiva® family’s
existing wide range of video, audio and data transport products include a
Hot swap redundant power supplies
unique Daisy-Chain™ feature that multiplexes multiple electrical inputs onto
virtually eliminate downtime
„
16, 4, 2, & 1 slot enclosures available
„
CE & CSA Certified Device
a single fiber, thus resulting in an extremely capable, yet conveniently flexible,
signal transport system.
Transmitter
DC to LNB
Receiver
SL
SIN
Push button
Laser
PL
PR
PhotoDiode
SOUT
SMON
Optimizer
SMON
Copyright © 2009 Emcore Corporation
626 293 3400
[email protected]
www.emcore.com
OTS-1L
Wideband Optical Link
Optiva® SERIES Professional Media Transport
SATCOM
Performance Highlights
Typical S21
Parameter
Link
Min
Typical
Max
Units
Frequency Range
50 Ohm
75 Ohm
50
50
-
3000
2500
MHz
MHz
Fiber Distance
0
-
20
Km
Optical Loss
0
-
8
dBo
Air Temperature
TXz
RX
-10
-
50
˚C
RF Input within SGC range1
-
0 to -35
-
dBm
TX Gain (TG) at max, 1 GHz2
0
8
-
dB (W/A)
TG Adjustment Range (reduction from max)
30
-
-
dB
Noise Figure (TG at max, 2150 MHz, 1dBo loss)
19
13
-
dB
Spur Free Dynamic Range (1dBo loss)
100
103-108
-
dB/Hz²/³
LNB Voltage
Current
16
-
17
-
19
350
V
mA
Optical Power
3
4
5
dBmo
DC Power
LNB Off
-
12
-
350
V
mA
-
-8 to -25
-
dBm
RX Gain (RG), at max, 1 GHz
20
22
-
dB (A/W)
RG Adjustment Range (reduction from max)
15
-
-
dB
Output IP3 (2150 MHz)
20
25
-
dBm
-
15
-
dBm
-12
-6
-
10
10
dBmo
dBmo
-
12
-
250
V
mA
RF Output (Tx at peak, 1 dBmo into Rx)
2
Output 1dB compression (2150 MHz)
Optical Input
Optimal
DC Power
2 dB per division
3.0 GHz
.05 GHz
3.6 GHz
OTS-1L (TX & RX)
5.06 in.
128 mm
3 RU
TX
1. Wider RF inputs are acceptable, but will set the RF amp gain to its limit.
2. Link RF GaindB = TG + RG – 2*FiberLossdBo (assumes Rin = Rout)
RX
3. dBmo & dBo indicate optical power & loss to minimize confusion with RF dBm & dB
Enclosure Options
Ordering Information
Product Code
Specifications
OTS-1LT/B5-1303-SA-IC
Transmitter, 50-3000 MHz, BNC 50 ohm, 1310 nm, 3dBm (min), SC/APC
OTS-1LT/B7-1303-SA-IC
Transmitter, 50-2500 MHz, BNC 75 ohm, 1310 nm, 3dBm (min), SC/APC
OTS-1LT/S5-1303-SA-IC
Transmitter, 50-3000 MHz, SMA 50 ohm, 1310 nm, 3dBm (min), SC/APC
OTS-1LR/B5-SA-IC
Receiver, 50-3000 MHz, BNC 50 ohm, SC/APC
OTS-1LR/B7-SA-IC
Receiver, 50-2500 MHz, BNC 75 ohm, SC/APC
OTS-1LR/S5-SA-IC
Receiver, 50-3000 MHz, SMA 50 ohm, SC/APC
OPV-CTLR-IC
NMS SNMP Controller Card & MIB for Optiva Family
OTP-1ETR-A2/A2
Optical Tcvr, 1Ch, Ethernet, SM, Dual LC
OT-CC-16-01
Chassis, Rack Mount, 16 Slot, 3RU, Rear Access
PS-200-(xx)
Power Supply, 12 Vdc, 100 to 240 Vac, 50/60 Hz, (Specify power cord (NA, EU, UK))
OT-CC-4-1U-(xx)
Chassis w/ built-in Power Supply, 1 RU, 4 slots, 110- 240 AC input, Power Cord
OT-DTCR-1 / OT-DTCR-2
OT-CC-4
OT-DTCR-2
Chassis, flange-mount, w/ Power Supply, 1 slot / 2 slot
Information contained herin is deemed to be reliable and accurate as of issue date. Emcore reserves the right to change
the design or specifications of the product at any time without notice. EMCORE and the EMCORE logo are trademarks of
the EMCORE Corporation.
Copyright © 2009 Emcore Corporation
OT-CC-16
626 293 3400
FCC
OT-DTCR-1
MADE IN
PART 15
COMPLIANT
USA
Document Revision 3/29/2009
[email protected]
www.emcore.com
Similar pages