Delta LC-155B3L1 155mbps, sff lc duplex optical transceiver module for fast ethernet, atm, sonet/sdh stm-1/oc-3 Datasheet

LC-155Bxxxx
155Mbps, SFF LC Duplex Optical Transceiver Module for
Fast Ethernet, ATM, SONET/SDH STM-1/OC-3
Features:
z
Full Compliance with the Optical Performance
Requirements of the ATM 100Mbps and 100
Base-FX Version of IEEE 802.3u.
z
Multisource 2x5 package styles with LC
Receptacle.
z
Single 5V(LC-155B1 and LC-155B3 Series)or
3.3V(LC-155B2 and LC-155B4 Series)Power
Supply.
z
PECL Differential Inputs and Outputs.
z
PECL(LC-155B1 and LC-155B2 Series) or
TTL(LC-155B3 and LC-155B4 Series)
Receiver Signal Detect Indicator.
z
Wave Solder and Aqueous Wash Process
Compatible.
Description:
The receiver sections utilize InGaAs PIN
photodiodes coupled into a custom silicon
transimpedance preamplifier IC. These are
packaged in the optical subassembly portion of
receiver.
The LC-155Bxxxx series from DELTA are SFF
(Small Form Factor) optical transceiver modules
designed expressly for high-speed communication
applications that require rates of up to 155Mbps.
They are all compliant with the SONET/SDH
standards.
These PIN / Preamplifier combinations are coupled
into a custom quantizer IC which provides the final
pulse shaping for the logic output and the Signal
Detect function. The data output is differential. The
signal detect output is single-ended.
The LC-155Bxxxx transceivers are supplied in 2x5
DIP package style with duplex LC connector and
are fully complaint with SFF Multi Source
Agreement (MSA).
Application:
All LC-155Bxxxx series can meet Class-1 eye
safety standard and effective distance depends on
ITU-T G.957 standard or power penalty.
The transmitter sections utilize 1310nm Edge
Emitting InGaAsP Laser Diode. This Laser Diode is
packaged in the optical subassembly portion of the
transmitter section. A custom silicon IC that
converts differential PECL logical signals into an
analog LD driving current then drive it.
z
Single-mode Fiber Backbone Links.
z
Fast Ethernet and ATM Compatible.
z
Single-mode Fiber Media Converter.
www.deltaww.com
DELTA ELECTRONICS, INC.
1
September 23, 2004
Revision:03
LC-155Bxxxx
Absolute Maximum Ratings
Parameter
Storage Temperature
Supply Voltage
Symbol
Ts
VCC
Min.
-40
0
Typ.
Max.
85
6
Unit
ºC
V
Note
Symbol
Min.
100
Typ.
155.52
Max.
200
Unit
Mbps
Note
TA
0
-40
25
25
70
85
ºC
VCC
4.75
3.15
5
3.3
5.25
3.45
V
Symbol
Min.
Typ.
Max.
Unit
VIL-VCC
VIH-VCC
-1.81
-1.16
-1.48
-0.88
V
V
VOL-VCC
VOH-VCC
VSDH-VCC
VSDL-VCC
VSDH-VCC
VSDL-VCC
-1.95
-1.045
-1.95
-1.05
-1.62
-0.74
-1.62
-0.74
0.8
V
V
V
V
V
V
Recommended Operating Conditions
Parameter
Data Rate
Operating Temperature
LC-155Bxxx
LC-155BxxxT
Supply Voltage
LC-155B1 and LC-155B3 Series
LC-155B2 and LC-155B4 Series
Electrical Characteristics
Parameter
Transmitter
Transmitter Data Input Voltage-Low
Transmitter Data Input Voltage-High
Receiver
Data Output Voltage-Low
Data Output Voltage-High
SD Output Voltage-Low
SD Output Voltage-High
SD Output Voltage-Low
SD Output Voltage-High
2.4
Note
ECL Family
LVTTL
Optical Characteristics
(Data Rate = 155.52Mbps, PRBS=223-1, NRZ, 9/125um SMF)
Parameter
Symbol
Min.
Typ.
Transmitter
Supply Current
Icc
Mean Launch Power
PO
Optical Extinction Ratio
Center Wavelength
Spectral Width (RMS)
Optical Risetime / Falltime
Output Eye Diagram
Receiver
E.R.
λC
σ
tr/tf
Supply Current
Icc
Sensitivity
PIN
Overload
Signal Detect-Asserted
Signal Detect-DeAsserted
Signal Detect-Hysteresis
Pol
PA
PD
PA-PD
Max.
Unit
Note
LC-155B1、B3 Series
LC-155B2、B4 Series
-20
LC-155BxHxxx
-15
LC-155BxJxxx
dBm
-8
LC-155BxLxxx
-5
LC-155BxMxxx
9
dB
1280
1310
1340
nm
nm
2
10%~90%
0.7
ns
Compliant with ITU-T recommendation G.957
150
120
-15
-8
-5
0
120
100
-32
-34
-8
-34
-45
1
mA
mA
dBm
LC-155B1、B3 Series
LC-155B2、B4 Series
LC-155BxMxxx
dBm
dBm
dBm
dB
www.deltaww.com
DELTA ELECTRONICS, INC.
2
September 23, 2004
Revision:03
LC-155Bxxxx
Notes:The sensitivity should be tested at BER of 1×10-10 or better with an input signal consisting of 155Mb/s,
NRZ, PRBS=223-1 and E.R.= 9dB.
Pin Definition:
Functional description
PIN
Symbol
1
GND
Receiver Signal Ground
2
VccR
Receiver Power Supply
3
SD
4
RD (-)
Receiver Data Out Bar (LVPECL or PECL)
5
RD (+)
Receiver Data Out (LVPECL or PECL)
6
VccT
Transmitter Power Supply
7
GND
Transmitter Signal Ground
8
TxDis
Transmitter Disable
9
TD (+)
Transmitter Data In (LVPECL or PECL)
10
TD (-)
Transmitter Data In Bar (LVPECL or PECL)
Receiver Signal Detect (LVPECL、LVTTL or TTL)
Recommend Circuit Schematic:
www.deltaww.com
DELTA ELECTRONICS, INC.
3
September 23, 2004
Revision:03
LC-155Bxxxx
Note:
z When system Vcc is 5V, the resistors
are as below:
z R1=150Ω
R2=R3=191Ω;R4=R5=68Ω
R6=R7=270Ω;R8=130Ω;R9=82Ω
z When system Vcc is 3.3V, the
resistors are as below:
R1=150Ω
R2=R3=130Ω;R4=R5=82Ω
R6=R7=150Ω;R8=82Ω;R9=130Ω
z R10, R11, R12 depend on SerDes IC
specification.
z For getting better EMI performance,
the Tx Vcc and Rx Vcc should isolate
each other as left photograph.
Package Outline:
Unit:mm
LC-155B Series with Plastic Housing
www.deltaww.com
DELTA ELECTRONICS, INC.
4
September 23, 2004
Revision:03
LC-155Bxxxx
LC-155B Series with Metal Housing
Order information:
LC-155Bx1x2x3x4
X1: Power Supply Voltage and SD Level
1: 5.0V;Data In/Out(PECL);SD Output(PECL)
2: 3.3V;Data In/Out(PECL);SD Output(PECL)
3: 5.0V;Data In/Out(PECL);SD Output(TTL)
4: 3.3V;Data In/Out(PECL);SD Output(TTL)
x2: Effective Distance Grade
H:
J:
L:
M:
x3: Performance
2Km
15Km
30Km
40Km
1: Normal
Other Symbol: It represents special specifications that depend on customers’ requirement.
x4: Temperature
Blank: 0℃ to 70℃
T: -40℃ to 85℃
www.deltaww.com
DELTA ELECTRONICS, INC.
5
September 23, 2004
Revision:03
LC-155Bxxxx
www.deltaww.com
DELTA ELECTRONICS, INC.
6
September 23, 2004
Revision:03
Similar pages