Bel C1S2.5 Surface mount slow blow chip fuse Datasheet

1206 size
RoHS Compliant
Type C1S
C1SD1005
Surface Mount Slow Blow Chip Fuse
EC1SD1005A1
Catalog
Number
C1S 750
Typical
Cold
Resistance
(ohm)
Volt-drop
@100% In
Melting I2T
@10 In
(Volt) max.
(A2 Sec)
750mA
0.420
0.442
0.037
0.40
Ampere
Rating
C1S 1
Electrical Characteristics
Testing current
(UL STD. 248-14)
Minimum
Maximum
100%
4 hrs
N/A
200%
1 sec
120 sec
300%
0.1 sec
3 sec
800%
0.002 sec
0.05 sec
0.220
0.325
0.068
0.39
1.25A
0.215
0.363
0.11
0.54
C1S 1.5
1.5A
0.108
0.313
0.24
0.56
2A
0.098
0.250
0.44
0.60
2.5A
0.053
0.212
0.74
0.64
Safety Agency Approvals
Recognized File No. E20624
C1S 2.5
C1S 3
3A
0.040
0.189
1.11
0.68
3.5A
0.031
0.173
1.58
0.74
C1S 4
4A
0.026
0.165
2.00
0.79
C1S 5
5A
0.019
0.153
3.40
0.92
C1S 3..5
rc
Approvals
r
1A
C1S 1.25
C1S 2
Blow Time
Amp range / Volt @ I.R. ability
Maximum
Power
Dissipation
(W)
Consult manufacturer for other ratings
Physical Specification
Materials
Ceramic Substrate / Printed Element
750mA - 5A / 63V @ 50A AC / DC
RoHS Compliant Product
RoHS Reflow Reference : JEDEC J-STD-020C (260°C, 40 sec max)
RoHS Wave Soldering Compatible : (260°C, 10 sec max)
Environmental Specification
Shock Resistance
MIL-STD-202G, Method 213B, Test Condition I
(100 G’s peak for 6 milliseconds; Sawtooth Waveform)
Vibration Resistance
MIL-STD-202G, Method 201F (10-55 Hz, 0.06 inch, total excursion)
Marking
On fuse:
None
Label on reel:
“bel”, “C1S”, “Current Rating”, “Voltage Rating”, “ Interrupting Rating”,
“Appropriate Safety Logos” and “
” for RoHS Version
Packaging
5,000 fuses in 7 inches dia. reel, 8 mm wide tape, 4 mm pitch per EIA-481
(equivalent IEC-286 part 3)
Salt Spray Resistance
MIL-STD-202G, Method 101E, Test condition B (48 hrs)
Insulation Resistance
MIL-STD-202G, Method 302, Test Condition A
(After Opening) 10,000 ohms minimum
Solderability
MIL-STD-202G, Method 208H
Soldering Heat Resistance
MIL-STD-202G Method 210F, Test Condition C.Top Side
(260°C, 20 sec)
MIL-STD-202G Method 210F, Test Condition D. Bottom Side
(260°C, 10 sec)
Thermal Shock Resistance
MIL-STD-202G, Method 107G, Test Condition B
(-65°C to +125°C)
Operating Temperature
-55°C to +125°C
1.52
( 0 . 0 6 0m m+ +_0 . 1 0 m m
" _0 . 0 0
4")
3 .0
(0 .1 271m m+ -+0 .1 3 m
"- 0 .0 0 m
5 ")
0 .5 8 m +
m
(0 .0 2 3 -+ 0 .0 8 m m
"- 0 .0 0
3 ")
0
.3 6 m
(0 .0 1 4 " m_+ _+0 .1 5 m m
0 .0 0 6 ")
C1S
Protective Overglaze
Element
Tin Plating
Nickel Barrier
Silver Metalization
Ceramic Substrate
1.52mm
(0.06")
1.52mm
(0.06")
1.78mm
(0.07")
2.03mm
(0.08")
1.14mm
(0.045")
PAD LAYOUT RECOMMENDED
FOR INFRARED SOLDER
1.52mm
(0.06")
PAD LAYOUT RECOMMENDED
FOR WAVE SOLDER
Specifications subject to change without notice
Mechanical Dimensions
ORDERING INFORMATION SEE LAST 2 PAGES
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel: 201-432-0463 • Fax: 201-432-9542 • E-Mail: [email protected]
Website: www.belfuse.com
17
1206 size
RoHS Compliant
Type C1S
Surface Mount Slow Blow Chip Fuse
C1SC1004 (O02)
- 750mA
- 1A
- 1.25A
- 1.5A
- 2A
- 2.5A
- 3A
- 3.5A
- 4A
- 5A
C1S - TIME CURRENT CHARACTERISTIC CURVE
10000
1000
TIME IN SECONDS
100
10
1
0.01
0.001
0.1
1
10
100
CURRENT IN AMPERES
Specifications subject to change without notice
0.1
NOTE - see important information under “User Guide”on P.08
Corporate Office
Bel Fuse Inc.
206 Van Vorst Street, Jersey City, NJ 07302
Tel: 201-432-0463
Fax: 201-432-9542
E-Mail: [email protected]
Website: www.belfuse.com
Far East Office
Bel Fuse Ltd.
8F/8 Luk Hop Street
San Po Kong
Kowloon, Hong Kong
Tel: 852-2328-5515
Fax: 852-2352-3706
European Office
Bel Fuse Europe Ltd.
Preston Technology Management Centre
Marsh Lane, Preston PR1 8UD
Lancashire, U.K
Tel: 44-1772-556601
Fax: 44-1772-888366
18
Similar pages