MACOM FM200DBY Kilovac fm200 (â flatmanâ ) series 1-, 2- or 3-pole contactor with contacts rated 200 amps, 480vac (50/60 hz. ) or 48vdc Datasheet

KILOVAC FM200 (“FLATMAN”) Series 1-, 2- or 3-pole Contactor
With Contacts Rated 200 Amps, 480Vac (50/60 Hz. ) or 48Vdc
Product Facts
Multi-pole configurations
Normally open, normally
closed and mixed contact
arrangements
Optional quick connect tabs
for sensing
Small, lightweight & costeffective – designed to be the
smallest, lowest cost
contactor in the industry with
its current rating
Standard models available
with 12VDC, 24VDC and 115
VAC coils. Consult factory for
240VAC coil models.
1 Form A auxiliary contacts
For factory-direct application assistance, dial
800-253-4560, ext. 2055, or 805-220-2055.
File E208033
Product Specifications
Parameter
Value for FM200 Series
Coil Operating Voltage (valid over temperature range)
Contact Arrangement
Units
1, 2 or 3 poles
Coil Designator
Units
A
B
C
D
Contact Form (per pole)
Form X or Y (NO-DM or NC-DB)
Nominal Voltage
V
12 (DC)
24 (DC)
115 (AC)
24 (DC)
Voltage Range
V
9.6-13.2
19.2-26.4
92-126.5
19.2-26.4
Hold Voltage
V
≥0.5Vnom
≥0.5Vnom
≥0.5Vnom
≥0.5Vnom
Dropout Voltage
V
≤0.1Vnom
≤0.1Vnom
≤0.1Vnom
≤0.2Vnom
Rated Operating Voltage
V
480Vrms (L-L) or 48VDC
Max. Contact Voltage (transient)
V
750Vrms or 60VDC
Continuous (Carry) Current
Arms or ADC 200/pole (Form X)
150/pole (Form Y)
Power Switching Form X (0.7-1.0 PF)
Cycles
2,000 @ 300Arms
10,000@ 200Arms
20,000 @ 100Arms
5,000 @ 200A/48VDC
2 million @ 50A/28VDC
Power Switching Form Y (0.7-1.0 PF)
Cycles
2,000 @ 225Arms
10,000@ 150Arms
20,000 @ 75Arms
5,000 @ 150A/48VDC
2 million @ 35A/28VDC
Mechanical Life
Cycles
>2 million
Contact Voltage Drop
mV
Coil Resistance Data for Pole Configurations (@25°C)
Arms or ADC 1 @ 30VDC, 3 @ 125VAC
Dielectric Withstanding Voltage
Vrms
Insulation Resistance @ 500VDC
2,200 @ sea level
Megohms
100
G
10
Shock, 11ms 1/2 sine, peak
Vibration, sine, 10-2000Hz.
G
5
Operating Temperature
°C
-20 to +60
Storage Temperature
°C
Ambient Humidity
B*
C*
D*
X = 36
XX = 18
XXX = 12
XY = 13.2
XYX = 9.6
X = 36
XX = 18
XXX = 12
XY = 13.2
XYX = 9.6
X = 36
XX = 18
XXX = 12
XY = 13.2
XYX = 9.6
Y = 20.8
YY = 10.4
YYY = 6.9
YXY = 8.1
Coil Designator
A
B**
Current/Power
X = 0.37 ADC / 4.84W
XX = 0.73ADC / 9.68W
XXX = 1.1ADC / 14.5W
XY = 1.0ADC / 13.2W
XYX = 1.38ADC / 18.2W
X = 0.33ADC / 3.9W
XX = 0.65ADC / 7.6W
XXX = 0.97ADC / 11.3W
XY = 0.98ADC / 12.7W
XYX = 1.31ADC / 16.5W
Coil Designator
Current/Power
-40 to +85
%RH
A
Ohms
Coil Current/Power Data for Pole Configurations (@25°C, Vcoil=1.1Vnom)
1 Form A (SPST-NO)
Auxiliary Contact Rating
Units
Resistance ±10%
*Coil resistance not measurable at terminals due to converter/economizer circuit.
75 for Form X or Form Y
Auxiliary Contact Arrangement
Coil Designator
0 to 95
Weight
oz. / kg
17.6 - 49.4 / 0.5 -1.4
See Outline Dimensions for model-specific weight information.
C
D***
Pick-Up I / Duration
X = 0.067 Arms / 6.8VA
Y = 0.13ADC / 3.4W
XX = 0.115Arms / 11.6VA YY = 0.23ADC / 6.1W
XXX = 0.146Arms / 14.8VA YYY = 0.34ADC / 9.0W
XY = 0.074Arms / 7.5VA YXY = 0.28ADC / 7.4W
XYX = 0.161Arms / 16.3VA
**Average coil current.
1.28ADC / 75ms
2.4ADC / 75ms
3.0ADC / 75ms
3.0ADC / 75ms
***Economized.
Available Pole Configurations and Applicable Coil Codes
No. of NC Poles (across)
No. of NO Poles (down)
0
0
1
2
3
Y
Coil D
YY
Coil D
YYY
Coil D
YXY
Coil D
1
X
Coil A/B/C/E
XY
Coil A/B/C/E
2
XX
Coil A/B/C/E
XYX
Coil A/B/C/E
3
XXX
Coil A/B/C/E
X = Form X (NO-DM) Y = Form Y (NC-DB)
Operate/Release Time (25°C, 0.8Vnom ≤ V < Vnom) Typ.
Coil Designator
Units
A
B****
C****
Operate Time
ms
25-50
30-50
50-150
D****
20-30
Release Time
ms
10-20
70-80
75-100
75-100
Bounce Time
ms
2-5
2-5
2-5
2-5
****Includes internal coil suppression.
© 2003 and 2007 by Tyco Electronics Corporation. All Rights Reserved.
FLATMAN, KILOVAC and TE Logo and Tyco Electronics are trademarks.
1
Catalog 1654769
Issued 11-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
200 Amp, 480Vac or 48Vdc Contactor
with 1, 2 or Poles
KILOVAC FM200 Series (FLATMAN)
(Continued)
Part Numbering System
Typical Part Number
FM200
A
B
XYX
Series:
FM200 = Multipole, 200 Amp, 480VAC/48VDC Contactor
Control Voltage:
A = 12VDC Coil, No Suppression
B = 24VDC Converter, with Suppression
C = 115VAC Converter, with Suppression
D = 24VDC Electronic Chopper, with Suppression
E = 240VAC Converter, with Suppression - Consult Factory for Availability and Specifications
Optional Termination:
A = Optional Quick Connect Tabs
B = No Optional Terminals
Pole Configuration (All models have a 1 Form A (SPST-NO) auxiliary switch):
X = 1 Form X (SPST-NO-DM), Available with control voltage codes A, B, C and E
XX = 2 Form X (2PST-NO-DM), Available with control voltage codes A, B, C and E
XXX = 3 Form X (3PST-NO-DM), Available with control voltage codes A, B, C and E
Y = 1 Form Y (SPST-NC-DB), Available only with control voltage code D
YY = 2 Form Y (DPST-NC-DB), Available only with control voltage code D
YYY = 3 Form Y (3PST-NC-DB), Available only with control voltage code D
XY = 1 Form X (SPST-NO-DM) + 1 Form Y (SPST-NC-DB), Available with control voltage codes A, B, C and E
XYX = 1 Form X (SPST-NO-DM) + 1 Form Y (SPST-NC-DB) + 1 Form X (SPST-NO-DM), Available with control voltage codes A, B, C and E
YXY = 1 Form Y (SPST-NC-DB) + 1 Form X (SPST-NO-DM) + 1 Form Y (SPST-NC-DB), Available only with control voltage code D
Outline Dimensions
2.29
(58.2)
1.86
(47.2)
OPTIONAL TAB
TERMINALS
.250 x .032
(6.35 x .813)
.40
(10.2)
C
MAIN TERMINAL
WIRE CONNECT
VIA M8 BOLT W/LOCK/FLAT
13MM (0.5 IN) HEX HEAD
3.77
(95.8)
2.29
(58.2)
1.93
(49.0)
1.22
(31.0)
4.2
(106.7)
DIM.
NUMBER OF POLES
1
1.68
(42.7)
2
2.67
(67.7)
3
3.65
(92.7)
B
2.14
(54.3)
3.12
(79.3)
4.11
(104.4)
C
1.56
(39.6)
2.55
(64.6)
3.53
(89.7)
WEIGHT
17.6 oz.
(0.5 kg)
35.3 oz.
(1.0 kg)
49.4 oz.
(1.4 kg)
A
RIGHT ANGLE SCREW
TERMINAL STRIP
ACCEPTS
#24 - #14 WIRE
A
3.42
(86.9)
3.77
(95.8)
2.74
(69.6)
2.98
(75.7)
.256 DIA.
(6.5)
B
For factory-direct application assistance, dial
800-253-4560, ext. 2055, or 805-220-2055.
1654769 – 0M – KRG – PDF – 11-07
Printed in U.S.A.
2
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Similar pages