Murata LQW15AN30NJ80 Inductance Datasheet

RF Inductors (Coils)
Data Sheet
1
LQW15AN_80 Series 1005/0402 (mm/inch)
Wound Thickness
General
(No Shield)
0.6 mm
max.
Low Rdc E-12 E-24
Step Step
Hi
Q
Tight
Tolerance Reflow
RoHS
OK
c Dimensions
c Packaging
Code
Packaging
Minimum Quantity
D
ø180mm Paper taping
10000
B
Packing in bulk
500
0.5±0.1
0.1±0.05
1.0±0.1
0.6±0.1
0.6±0.1
0.2±0.1
0.2±0.1
(in mm)
c Rated Value (p: packaging code)
Part Number
Inductance
Inductance
test frequency
Rated current
Max. of DC resistance
Q (min.)
Q test frequency
Self resonance
frequency (min.)
LQW15AN1N3C80p
1.3nH ±0.2nH
100MHz
3150mA
0.012Ω
20
250MHz
18GHz
LQW15AN1N3D80p
1.3nH ±0.5nH
100MHz
3150mA
0.012Ω
20
250MHz
18GHz
LQW15AN1N5C80p
1.5nH ±0.2nH
100MHz
2100mA
0.028Ω
20
250MHz
18GHz
LQW15AN1N5D80p
1.5nH ±0.5nH
100MHz
2100mA
0.028Ω
20
250MHz
18GHz
LQW15AN1N6C80p
1.6nH ±0.2nH
100MHz
1450mA
0.045Ω
20
250MHz
18GHz
LQW15AN1N6D80p
1.6nH ±0.5nH
100MHz
1450mA
0.045Ω
20
250MHz
18GHz
LQW15AN1N7C80p
1.7nH ±0.2nH
100MHz
1150mA
0.065Ω
20
250MHz
18GHz
LQW15AN1N7D80p
1.7nH ±0.5nH
100MHz
1150mA
0.065Ω
20
250MHz
18GHz
LQW15AN2N2B80p
2.2nH ±0.1nH
100MHz
2530mA
0.022Ω
30
250MHz
15.5GHz
LQW15AN2N2C80p
2.2nH ±0.2nH
100MHz
2530mA
0.022Ω
30
250MHz
15.5GHz
LQW15AN2N2D80p
2.2nH ±0.5nH
100MHz
2530mA
0.022Ω
30
250MHz
15.5GHz
LQW15AN2N3B80p
2.3nH ±0.1nH
100MHz
2530mA
0.022Ω
30
250MHz
15.5GHz
LQW15AN2N3C80p
2.3nH ±0.2nH
100MHz
2530mA
0.022Ω
30
250MHz
15.5GHz
LQW15AN2N3D80p
2.3nH ±0.5nH
100MHz
2530mA
0.022Ω
30
250MHz
15.5GHz
LQW15AN2N4B80p
2.4nH ±0.1nH
100MHz
2530mA
0.022Ω
30
250MHz
15.5GHz
LQW15AN2N4C80p
2.4nH ±0.2nH
100MHz
2530mA
0.022Ω
30
250MHz
15.5GHz
LQW15AN2N4D80p
2.4nH ±0.5nH
100MHz
2530mA
0.022Ω
30
250MHz
15.5GHz
LQW15AN2N5B80p
2.5nH ±0.1nH
100MHz
2100mA
0.03Ω
30
250MHz
15.5GHz
LQW15AN2N5C80p
2.5nH ±0.2nH
100MHz
2100mA
0.03Ω
30
250MHz
15.5GHz
LQW15AN2N5D80p
2.5nH ±0.5nH
100MHz
2100mA
0.03Ω
30
250MHz
15.5GHz
LQW15AN2N6B80p
2.6nH ±0.1nH
100MHz
1950mA
0.035Ω
30
250MHz
14.5GHz
LQW15AN2N6C80p
2.6nH ±0.2nH
100MHz
1950mA
0.035Ω
30
250MHz
14.5GHz
LQW15AN2N6D80p
2.6nH ±0.5nH
100MHz
1950mA
0.035Ω
30
250MHz
14.5GHz
LQW15AN2N7B80p
2.7nH ±0.1nH
100MHz
1500mA
0.047Ω
28
250MHz
14GHz
LQW15AN2N7C80p
2.7nH ±0.2nH
100MHz
1500mA
0.047Ω
28
250MHz
14GHz
LQW15AN2N7D80p
2.7nH ±0.5nH
100MHz
1500mA
0.047Ω
28
250MHz
14GHz
Operating temperature range (Self-temperature rise is not included): -55〜125℃
Only for reflow soldering.
Continued on the following page.
oThis data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2013.7.8
http://www.murata.com/
RF Inductors (Coils)
Data Sheet
2
Continued from the preceding page.
Part Number
Inductance
Inductance
test frequency
Rated current
Max. of DC resistance
Q (min.)
Q test frequency
Self resonance
frequency (min.)
LQW15AN2N8B80p
2.8nH ±0.1nH
100MHz
1500mA
0.047Ω
27
250MHz
13.5GHz
LQW15AN2N8C80p
2.8nH ±0.2nH
100MHz
1500mA
0.047Ω
27
250MHz
13.5GHz
LQW15AN2N8D80p
2.8nH ±0.5nH
100MHz
1500mA
0.047Ω
27
250MHz
13.5GHz
LQW15AN2N9B80p
2.9nH ±0.1nH
100MHz
1500mA
0.047Ω
25
250MHz
12.5GHz
LQW15AN2N9C80p
2.9nH ±0.2nH
100MHz
1500mA
0.047Ω
25
250MHz
12.5GHz
12.5GHz
LQW15AN2N9D80p
2.9nH ±0.5nH
100MHz
1500mA
0.047Ω
25
250MHz
LQW15AN3N3B80p
3.3nH ±0.1nH
100MHz
2000mA
0.03Ω
30
250MHz
14GHz
LQW15AN3N3C80p
3.3nH ±0.2nH
100MHz
2000mA
0.03Ω
30
250MHz
14GHz
LQW15AN3N3D80p
3.3nH ±0.5nH
100MHz
2000mA
0.03Ω
30
250MHz
14GHz
LQW15AN3N4B80p
3.4nH ±0.1nH
100MHz
1950mA
0.030Ω
30
250MHz
10GHz
LQW15AN3N4C80p
3.4nH ±0.2nH
100MHz
1950mA
0.030Ω
30
250MHz
10GHz
LQW15AN3N4D80p
3.4nH ±0.5nH
100MHz
1950mA
0.030Ω
30
250MHz
10GHz
10.0GHz
LQW15AN3N5B80p
3.5nH ±0.1nH
100MHz
1950mA
0.030Ω
30
250MHz
LQW15AN3N5C80p
3.5nH ±0.2nH
100MHz
1950mA
0.030Ω
30
250MHz
10.0GHz
LQW15AN3N5D80p
3.5nH ±0.5nH
100MHz
1950mA
0.030Ω
30
250MHz
10.0GHz
LQW15AN3N6B80p
3.6nH ±0.1nH
100MHz
1950mA
0.030Ω
30
250MHz
10GHz
LQW15AN3N6C80p
3.6nH ±0.2nH
100MHz
1950mA
0.030Ω
30
250MHz
10GHz
LQW15AN3N6D80p
3.6nH ±0.5nH
100MHz
1950mA
0.030Ω
30
250MHz
10GHz
LQW15AN3N7B80p
3.7nH ±0.1nH
100MHz
1950mA
0.030Ω
35
250MHz
10.0GHz
LQW15AN3N7C80p
3.7nH ±0.2nH
100MHz
1950mA
0.030Ω
35
250MHz
10.0GHz
LQW15AN3N7D80p
3.7nH ±0.5nH
100MHz
1950mA
0.030Ω
35
250MHz
10.0GHz
LQW15AN3N8B80p
3.8nH ±0.1nH
100MHz
1950mA
0.030Ω
35
250MHz
10GHz
LQW15AN3N8C80p
3.8nH ±0.2nH
100MHz
1950mA
0.030Ω
35
250MHz
10GHz
LQW15AN3N8D80p
3.8nH ±0.5nH
100MHz
1950mA
0.030Ω
35
250MHz
10GHz
LQW15AN3N9B80p
3.9nH ±0.1nH
100MHz
1950mA
0.030Ω
35
250MHz
10GHz
LQW15AN3N9C80p
3.9nH ±0.2nH
100MHz
1950mA
0.030Ω
35
250MHz
10GHz
LQW15AN3N9D80p
3.9nH ±0.5nH
100MHz
1950mA
0.030Ω
35
250MHz
10GHz
LQW15AN4N0B80p
4.0nH ±0.1nH
100MHz
1950mA
0.030Ω
30
250MHz
10GHz
LQW15AN4N0C80p
4.0nH ±0.2nH
100MHz
1950mA
0.030Ω
30
250MHz
10GHz
LQW15AN4N0D80p
4.0nH ±0.5nH
100MHz
1950mA
0.030Ω
30
250MHz
10GHz
LQW15AN4N1B80p
4.1nH ±0.1nH
100MHz
1800mA
0.044Ω
30
250MHz
9.6GHz
LQW15AN4N1C80p
4.1nH ±0.2nH
100MHz
1800mA
0.044Ω
30
250MHz
9.6GHz
LQW15AN4N1D80p
4.1nH ±0.5nH
100MHz
1800mA
0.044Ω
30
250MHz
9.6GHz
LQW15AN4N2B80p
4.2nH ±0.1nH
100MHz
1800mA
0.044Ω
30
250MHz
9.6GHz
LQW15AN4N2C80p
4.2nH ±0.2nH
100MHz
1800mA
0.044Ω
30
250MHz
9.6GHz
LQW15AN4N2D80p
4.2nH ±0.5nH
100MHz
1800mA
0.044Ω
30
250MHz
9.6GHz
LQW15AN4N4B80p
4.4nH ±0.1nH
100MHz
1600mA
0.052Ω
34
250MHz
9.6GHz
LQW15AN4N4C80p
4.4nH ±0.2nH
100MHz
1600mA
0.052Ω
34
250MHz
9.6GHz
LQW15AN4N4D80p
4.4nH ±0.5nH
100MHz
1600mA
0.052Ω
34
250MHz
9.6GHz
LQW15AN4N5B80p
4.5nH ±0.1nH
100MHz
1450mA
0.06Ω
34
250MHz
9.6GHz
LQW15AN4N5C80p
4.5nH ±0.2nH
100MHz
1450mA
0.06Ω
34
250MHz
9.6GHz
LQW15AN4N5D80p
4.5nH ±0.5nH
100MHz
1450mA
0.06Ω
34
250MHz
9.6GHz
LQW15AN4N7B80p
4.7nH ±0.1nH
100MHz
1200mA
0.071Ω
31
250MHz
8GHz
LQW15AN4N7C80p
4.7nH ±0.2nH
100MHz
1200mA
0.071Ω
31
250MHz
8GHz
LQW15AN4N7D80p
4.7nH ±0.5nH
100MHz
1200mA
0.071Ω
31
250MHz
8GHz
Operating temperature range (Self-temperature rise is not included): -55〜125℃
Only for reflow soldering.
Continued on the following page.
oThis data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2013.7.8
http://www.murata.com/
RF Inductors (Coils)
Data Sheet
3
Continued from the preceding page.
Part Number
Inductance
Inductance
test frequency
Rated current
Max. of DC resistance
Q (min.)
Q test frequency
Self resonance
frequency (min.)
LQW15AN4N8B80p
4.8nH ±0.1nH
100MHz
1200mA
0.071Ω
30
250MHz
8GHz
LQW15AN4N8C80p
4.8nH ±0.2nH
100MHz
1200mA
0.071Ω
30
250MHz
8GHz
LQW15AN4N8D80p
4.8nH ±0.5nH
100MHz
1200mA
0.071Ω
30
250MHz
8GHz
LQW15AN4N9B80p
4.9nH ±0.1nH
100MHz
1200mA
0.071Ω
27
250MHz
8GHz
LQW15AN4N9C80p
4.9nH ±0.2nH
100MHz
1200mA
0.071Ω
27
250MHz
8GHz
LQW15AN4N9D80p
4.9nH ±0.5nH
100MHz
1200mA
0.071Ω
27
250MHz
8GHz
LQW15AN5N0B80p
5nH ±0.1nH
100MHz
1770mA
0.04Ω
32
250MHz
10GHz
LQW15AN5N0C80p
5nH ±0.2nH
100MHz
1770mA
0.04Ω
32
250MHz
10GHz
LQW15AN5N0D80p
5nH ±0.5nH
100MHz
1770mA
0.04Ω
32
250MHz
10GHz
LQW15AN5N1B80p
5.1nH ±0.1nH
100MHz
1770mA
0.040Ω
35
250MHz
8GHz
LQW15AN5N1C80p
5.1nH ±0.2nH
100MHz
1770mA
0.040Ω
35
250MHz
8GHz
LQW15AN5N1D80p
5.1nH ±0.5nH
100MHz
1770mA
0.040Ω
35
250MHz
8GHz
8GHz
LQW15AN5N2B80p
5.2nH ±0.1nH
100MHz
1770mA
0.040Ω
35
250MHz
LQW15AN5N2C80p
5.2nH ±0.2nH
100MHz
1770mA
0.040Ω
35
250MHz
8GHz
LQW15AN5N2D80p
5.2nH ±0.5nH
100MHz
1770mA
0.040Ω
35
250MHz
8GHz
LQW15AN5N3B80p
5.3nH ±0.1nH
100MHz
1770mA
0.04Ω
35
250MHz
8GHz
LQW15AN5N3C80p
5.3nH ±0.2nH
100MHz
1770mA
0.04Ω
35
250MHz
8GHz
LQW15AN5N3D80p
5.3nH ±0.5nH
100MHz
1770mA
0.04Ω
35
250MHz
8GHz
LQW15AN5N4B80p
5.4nH ±0.1nH
100MHz
1770mA
0.040Ω
35
250MHz
8GHz
LQW15AN5N4C80p
5.4nH ±0.2nH
100MHz
1770mA
0.040Ω
35
250MHz
8GHz
LQW15AN5N4D80p
5.4nH ±0.5nH
100MHz
1770mA
0.040Ω
35
250MHz
8GHz
LQW15AN5N5B80p
5.5nH ±0.1nH
100MHz
1770mA
0.04Ω
35
250MHz
8GHz
LQW15AN5N5C80p
5.5nH ±0.2nH
100MHz
1770mA
0.04Ω
35
250MHz
8GHz
LQW15AN5N5D80p
5.5nH ±0.5nH
100MHz
1770mA
0.04Ω
35
250MHz
8GHz
LQW15AN5N6B80p
5.6nH ±0.1nH
100MHz
1770mA
0.040Ω
35
250MHz
8GHz
LQW15AN5N6C80p
5.6nH ±0.2nH
100MHz
1770mA
0.040Ω
35
250MHz
8GHz
LQW15AN5N6D80p
5.6nH ±0.5nH
100MHz
1770mA
0.040Ω
35
250MHz
8GHz
LQW15AN5N7B80p
5.7nH ±0.1nH
100MHz
1770mA
0.040Ω
30
250MHz
8GHz
LQW15AN5N7C80p
5.7nH ±0.2nH
100MHz
1770mA
0.040Ω
30
250MHz
8GHz
LQW15AN5N7D80p
5.7nH ±0.5nH
100MHz
1770mA
0.040Ω
30
250MHz
8GHz
LQW15AN5N8B80p
5.8nH ±0.1nH
100MHz
1770mA
0.040Ω
30
250MHz
8GHz
LQW15AN5N8C80p
5.8nH ±0.2nH
100MHz
1770mA
0.040Ω
30
250MHz
8GHz
LQW15AN5N8D80p
5.8nH ±0.5nH
100MHz
1770mA
0.040Ω
30
250MHz
8GHz
LQW15AN5N9B80p
5.9nH ±0.1nH
100MHz
1770mA
0.04Ω
30
250MHz
8GHz
LQW15AN5N9C80p
5.9nH ±0.2nH
100MHz
1770mA
0.04Ω
30
250MHz
8GHz
LQW15AN5N9D80p
5.9nH ±0.5nH
100MHz
1770mA
0.04Ω
30
250MHz
8GHz
LQW15AN6N0B80p
6.0nH ±0.1nH
100MHz
1600mA
0.056Ω
32
250MHz
8GHz
LQW15AN6N0C80p
6.0nH ±0.2nH
100MHz
1600mA
0.056Ω
32
250MHz
8GHz
LQW15AN6N0D80p
6.0nH ±0.5nH
100MHz
1600mA
0.056Ω
32
250MHz
8GHz
LQW15AN6N1B80p
6.1nH ±0.1nH
100MHz
1600mA
0.056Ω
32
250MHz
8GHz
LQW15AN6N1C80p
6.1nH ±0.2nH
100MHz
1600mA
0.056Ω
32
250MHz
8GHz
LQW15AN6N1D80p
6.1nH ±0.5nH
100MHz
1600mA
0.056Ω
32
250MHz
8GHz
LQW15AN6N2B80p
6.2nH ±0.1nH
100MHz
1600mA
0.056Ω
33
250MHz
8GHz
LQW15AN6N2C80p
6.2nH ±0.2nH
100MHz
1600mA
0.056Ω
33
250MHz
8GHz
LQW15AN6N2D80p
6.2nH ±0.5nH
100MHz
1600mA
0.056Ω
33
250MHz
8GHz
Operating temperature range (Self-temperature rise is not included): -55〜125℃
Only for reflow soldering.
Continued on the following page.
oThis data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2013.7.8
http://www.murata.com/
RF Inductors (Coils)
Data Sheet
4
Continued from the preceding page.
Part Number
Inductance
Inductance
test frequency
Rated current
Max. of DC resistance
Q (min.)
Q test frequency
Self resonance
frequency (min.)
LQW15AN6N4G80p
6.4nH ±2%
100MHz
1380mA
0.065Ω
33
250MHz
7GHz
LQW15AN6N4J80p
6.4nH ±5%
100MHz
1380mA
0.065Ω
33
250MHz
7GHz
LQW15AN6N5G80p
6.5nH ±2%
100MHz
1380mA
0.065Ω
32
250MHz
7GHz
LQW15AN6N5J80p
6.5nH ±5%
100MHz
1380mA
0.065Ω
32
250MHz
7GHz
LQW15AN6N6G80p
6.6nH ±2%
100MHz
1280mA
0.078Ω
30
250MHz
7GHz
LQW15AN6N6J80p
6.6nH ±5%
100MHz
1280mA
0.078Ω
30
250MHz
7GHz
LQW15AN6N7G80p
6.7nH ±2%
100MHz
1280mA
0.078Ω
30
250MHz
7GHz
LQW15AN6N7J80p
6.7nH ±5%
100MHz
1280mA
0.078Ω
30
250MHz
7GHz
LQW15AN6N9G80p
6.9nH ±2%
100MHz
1420mA
0.069Ω
32
250MHz
8.5GHz
LQW15AN6N9J80p
6.9nH ±5%
100MHz
1420mA
0.069Ω
32
250MHz
8.5GHz
LQW15AN7N0G80p
7.0nH ±2%
100MHz
1420mA
0.069Ω
33
250MHz
8GHz
LQW15AN7N0J80p
7.0nH ±5%
100MHz
1420mA
0.069Ω
33
250MHz
8GHz
LQW15AN7N1G80p
7.1nH ±2%
100MHz
1420mA
0.069Ω
32
250MHz
7GHz
LQW15AN7N1J80p
7.1nH ±5%
100MHz
1420mA
0.069Ω
32
250MHz
7GHz
LQW15AN7N2G80p
7.2nH ±2%
100MHz
1700mA
0.05Ω
32
250MHz
7GHz
7GHz
LQW15AN7N2J80p
7.2nH ±5%
100MHz
1700mA
0.05Ω
32
250MHz
LQW15AN7N3G80p
7.3nH ±2%
100MHz
1700mA
0.05Ω
32
250MHz
7GHz
LQW15AN7N3J80p
7.3nH ±5%
100MHz
1700mA
0.05Ω
32
250MHz
7GHz
LQW15AN7N4G80p
7.4nH ±2%
100MHz
1700mA
0.050Ω
30
250MHz
7GHz
LQW15AN7N4J80p
7.4nH ±5%
100MHz
1700mA
0.050Ω
30
250MHz
7GHz
LQW15AN7N5G80p
7.5nH ±2%
100MHz
1700mA
0.050Ω
35
250MHz
7GHz
LQW15AN7N5J80p
7.5nH ±5%
100MHz
1700mA
0.050Ω
35
250MHz
7GHz
LQW15AN7N6G80p
7.6nH ±2%
100MHz
1700mA
0.050Ω
30
250MHz
7GHz
LQW15AN7N6J80p
7.6nH ±5%
100MHz
1700mA
0.050Ω
30
250MHz
7GHz
LQW15AN7N7G80p
7.7nH ±2%
100MHz
1700mA
0.050Ω
30
250MHz
7GHz
LQW15AN7N7J80p
7.7nH ±5%
100MHz
1700mA
0.050Ω
30
250MHz
7GHz
7GHz
LQW15AN7N8G80p
7.8nH ±2%
100MHz
1700mA
0.050Ω
30
250MHz
LQW15AN7N8J80p
7.8nH ±5%
100MHz
1700mA
0.050Ω
30
250MHz
7GHz
LQW15AN7N9G80p
7.9nH ±2%
100MHz
1700mA
0.05Ω
30
250MHz
7GHz
LQW15AN7N9J80p
7.9nH ±5%
100MHz
1700mA
0.05Ω
30
250MHz
7GHz
LQW15AN8N0G80p
8.0nH ±2%
100MHz
1700mA
0.050Ω
30
250MHz
7GHz
LQW15AN8N0J80p
8.0nH ±5%
100MHz
1700mA
0.050Ω
30
250MHz
7GHz
LQW15AN8N1G80p
8.1nH ±2%
100MHz
1500mA
0.069Ω
32
250MHz
6.5GHz
LQW15AN8N1J80p
8.1nH ±5%
100MHz
1500mA
0.069Ω
32
250MHz
6.5GHz
LQW15AN8N2G80p
8.2nH ±2%
100MHz
1500mA
0.069Ω
32
250MHz
6.5GHz
LQW15AN8N2J80p
8.2nH ±5%
100MHz
1500mA
0.069Ω
32
250MHz
6.5GHz
LQW15AN8N3G80p
8.3nH ±2%
100MHz
1500mA
0.069Ω
32
250MHz
6.5GHz
LQW15AN8N3J80p
8.3nH ±5%
100MHz
1500mA
0.069Ω
32
250MHz
6.5GHz
LQW15AN8N4G80p
8.4nH ±2%
100MHz
1500mA
0.069Ω
32
250MHz
6.5GHz
LQW15AN8N4J80p
8.4nH ±5%
100MHz
1500mA
0.069Ω
32
250MHz
6.5GHz
LQW15AN8N5G80p
8.5nH ±2%
100MHz
1500mA
0.069Ω
32
250MHz
6.5GHz
LQW15AN8N5J80p
8.5nH ±5%
100MHz
1500mA
0.069Ω
32
250MHz
6.5GHz
LQW15AN9N1G80p
9.1nH ±2%
100MHz
1400mA
0.080Ω
32
250MHz
6.5GHz
LQW15AN9N1J80p
9.1nH ±5%
100MHz
1400mA
0.080Ω
32
250MHz
6.5GHz
LQW15AN9N2G80p
9.2nH ±2%
100MHz
1400mA
0.081Ω
32
250MHz
6GHz
Operating temperature range (Self-temperature rise is not included): -55〜125℃
Only for reflow soldering.
Continued on the following page.
oThis data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2013.7.8
http://www.murata.com/
RF Inductors (Coils)
Data Sheet
5
Continued from the preceding page.
Part Number
Inductance
Inductance
test frequency
Rated current
Max. of DC resistance
Q (min.)
Q test frequency
Self resonance
frequency (min.)
LQW15AN9N2J80p
9.2nH ±5%
100MHz
1400mA
0.081Ω
32
250MHz
6GHz
LQW15AN9N3G80p
9.3nH ±2%
100MHz
1400mA
0.081Ω
34
250MHz
6GHz
LQW15AN9N3J80p
9.3nH ±5%
100MHz
1400mA
0.081Ω
34
250MHz
6GHz
LQW15AN9N4G80p
9.4nH ±2%
100MHz
1400mA
0.081Ω
33
250MHz
6GHz
LQW15AN9N4J80p
9.4nH ±5%
100MHz
1400mA
0.081Ω
33
250MHz
6GHz
LQW15AN9N5G80p
9.5nH ±2%
100MHz
1400mA
0.081Ω
32
250MHz
6GHz
LQW15AN9N5J80p
9.5nH ±5%
100MHz
1400mA
0.081Ω
32
250MHz
6GHz
LQW15AN9N6G80p
9.6nH ±2%
100MHz
1400mA
0.081Ω
33
250MHz
6GHz
LQW15AN9N6J80p
9.6nH ±5%
100MHz
1400mA
0.081Ω
33
250MHz
6GHz
LQW15AN9N7G80p
9.7nH ±2%
100MHz
1400mA
0.081Ω
33
250MHz
6GHz
LQW15AN9N7J80p
9.7nH ±5%
100MHz
1400mA
0.081Ω
33
250MHz
6GHz
LQW15AN9N8G80p
9.8nH ±2%
100MHz
1400mA
0.081Ω
34
250MHz
6GHz
LQW15AN9N8J80p
9.8nH ±5%
100MHz
1400mA
0.081Ω
34
250MHz
6GHz
LQW15AN9N9G80p
9.9nH ±2%
100MHz
1400mA
0.081Ω
32
250MHz
6GHz
LQW15AN9N9J80p
9.9nH ±5%
100MHz
1400mA
0.081Ω
32
250MHz
6GHz
LQW15AN10NG80p
10nH ±2%
100MHz
1400mA
0.081Ω
31
250MHz
6GHz
LQW15AN10NJ80p
10nH ±5%
100MHz
1400mA
0.081Ω
31
250MHz
6GHz
LQW15AN12NG80p
12nH ±2%
100MHz
1240mA
0.093Ω
30
250MHz
5.2GHz
LQW15AN12NJ80p
12nH ±5%
100MHz
1240mA
0.093Ω
30
250MHz
5.2GHz
LQW15AN13NG80p
13nH ±2%
100MHz
1240mA
0.093Ω
30
250MHz
5.2GHz
LQW15AN13NJ80p
13nH ±5%
100MHz
1240mA
0.093Ω
30
250MHz
5.2GHz
LQW15AN14NG80p
14nH ±2%
100MHz
1150mA
0.111Ω
31
250MHz
5.2GHz
LQW15AN14NJ80p
14nH ±5%
100MHz
1150mA
0.111Ω
31
250MHz
5.2GHz
LQW15AN16NG80p
16nH ±2%
100MHz
1000mA
0.126Ω
31
250MHz
5GHz
LQW15AN16NJ80p
16nH ±5%
100MHz
1000mA
0.126Ω
31
250MHz
5GHz
LQW15AN20NG80p
20nH ±2%
100MHz
800mA
0.186Ω
30
250MHz
4.5GHz
LQW15AN20NJ80p
20nH ±5%
100MHz
800mA
0.186Ω
30
250MHz
4.5GHz
LQW15AN21NG80p
21nH ±2%
100MHz
780mA
0.202Ω
30
250MHz
4.5GHz
LQW15AN21NJ80p
21nH ±5%
100MHz
780mA
0.202Ω
30
250MHz
4.5GHz
LQW15AN22NG80p
22nH ±2%
100MHz
780mA
0.202Ω
30
250MHz
4.5GHz
LQW15AN22NJ80p
22nH ±5%
100MHz
780mA
0.202Ω
30
250MHz
4.5GHz
LQW15AN23NG80p
23nH ±2%
100MHz
760mA
0.201Ω
29
250MHz
4.5GHz
LQW15AN23NJ80p
23nH ±5%
100MHz
760mA
0.201Ω
29
250MHz
4.5GHz
LQW15AN24NG80p
24nH ±2%
100MHz
770mA
0.212Ω
31
250MHz
4GHz
LQW15AN24NJ80p
24nH ±5%
100MHz
770mA
0.212Ω
31
250MHz
4GHz
LQW15AN25NG80p
25nH ±2%
100MHz
750mA
0.221Ω
31
250MHz
4.1GHz
LQW15AN25NJ80p
25nH ±5%
100MHz
750mA
0.221Ω
31
250MHz
4.1GHz
LQW15AN26NG80p
26nH ±2%
100MHz
720mA
0.282Ω
29
250MHz
4.1GHz
LQW15AN26NJ80p
26nH ±5%
100MHz
720mA
0.282Ω
29
250MHz
4.1GHz
LQW15AN27NG80p
27nH ±2%
100MHz
680mA
0.288Ω
30
250MHz
4GHz
LQW15AN27NJ80p
27nH ±5%
100MHz
680mA
0.288Ω
30
250MHz
4GHz
LQW15AN30NG80p
30nH ±2%
100MHz
660mA
0.309Ω
30
250MHz
3.8GHz
LQW15AN30NJ80p
30nH ±5%
100MHz
660mA
0.309Ω
30
250MHz
3.8GHz
LQW15AN33NG80p
33nH ±2%
100MHz
620mA
0.336Ω
30
250MHz
3.6GHz
LQW15AN33NJ80p
33nH ±5%
100MHz
620mA
0.336Ω
30
250MHz
3.6GHz
Operating temperature range (Self-temperature rise is not included): -55〜125℃
Only for reflow soldering.
Continued on the following page.
oThis data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2013.7.8
http://www.murata.com/
RF Inductors (Coils)
Data Sheet
6
Continued from the preceding page.
Part Number
Inductance
test frequency
Inductance
Rated current
Max. of DC resistance
Q (min.)
Q test frequency
Self resonance
frequency (min.)
LQW15AN36NG80p
36nH ±2%
100MHz
540mA
0.431Ω
30
250MHz
3.5GHz
LQW15AN36NJ80p
36nH ±5%
100MHz
540mA
0.431Ω
30
250MHz
3.5GHz
LQW15AN39NG80p
39nH ±2%
100MHz
530mA
0.456Ω
28
250MHz
3.4GHz
LQW15AN39NJ80p
39nH ±5%
100MHz
530mA
0.456Ω
28
250MHz
3.4GHz
LQW15AN43NG80p
43nH ±2%
100MHz
515mA
0.516Ω
30
250MHz
3.4GHz
LQW15AN43NJ80p
43nH ±5%
100MHz
515mA
0.516Ω
30
250MHz
3.4GHz
LQW15AN47NG80p
47nH ±2%
100MHz
440mA
0.648Ω
25
250MHz
3.2GHz
LQW15AN47NJ80p
47nH ±5%
100MHz
440mA
0.648Ω
25
250MHz
3.2GHz
LQW15AN53NG80p
53nH ±2%
100MHz
415mA
0.696Ω
25
200MHz
2.9GHz
LQW15AN53NJ80p
53nH ±5%
100MHz
415mA
0.696Ω
25
200MHz
2.9GHz
LQW15AN56NG80p
56nH ±2%
100MHz
340mA
0.996Ω
25
200MHz
2.9GHz
LQW15AN56NJ80p
56nH ±5%
100MHz
340mA
0.996Ω
25
200MHz
2.9GHz
LQW15AN75NG80p
75nH ±2%
100MHz
320mA
1.224Ω
25
200MHz
2.4GHz
LQW15AN75NJ80p
75nH ±5%
100MHz
320mA
1.224Ω
25
200MHz
2.4GHz
Operating temperature range (Self-temperature rise is not included): -55〜125℃
Only for reflow soldering.
c Derating of Rated Current
In operating temperature exceeding +85°C, derating of
current is necessary for LQW15A_80 series.
Please apply the derating curve shown in chart according to
the operating temperature.
Rated Derating (%)
Derating of Rated Current
100
50
0
0
85
125
Operating Temperature (°C)
c Q-Frequency characteristics (Typ.)
c Inductance-Frequency characteristics (Typ.)
1000
200
180
1.3nH
75nH
160
140
27nH
L (nH)
Q
43nH
100
3.6nH
120
5.6nH
100
10nH
80
10nH
10
60
5.6nH
40
3.6nH
27nH
43nH
20
1.3nH
75nH
0
1
10
100
Frequency (MHz)
1000
1
10000
1
10
100
Frequency (MHz)
1000
10000
Continued on the following page.
oThis data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2013.7.8
http://www.murata.com/
RF Inductors (Coils)
Data Sheet
7
Continued from the preceding page.
c !Caution/Notice
!Caution (Rating)
Do not use products beyond the rated current as
this may create excessive heat.
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profile
where peak solder temperature is below the Tin melting
point is used. Please confirm the solderability of Tin
plating termination chip before use.
oThis data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2013.7.8
http://www.murata.com/
Similar pages