Features • Ultra High Performance • • • • • • • • • – System Speeds to 100 MHz – Array Multipliers > 50 MHz – 10 ns Flexible SRAM – Internal Tri-state Capability in Each Cell FreeRAM™ – Flexible, Single/Dual Port, Synchronous/Asynchronous 10 ns SRAM – 2,048 - 18,432 Bits of Distributed SRAM Independent of Logic Cells 128 - 384 PCI Compliant I/Os – Programmable Output Drive – Fast, Flexible Array Access Facilitates Pin Locking – Pin-compatible with XC4000, XC5200 FPGAs 8 Global Clocks – Fast, Low Skew Clock Distribution – Programmable Rising/Falling Edge Transitions – Distributed Clock Shutdown Capability for Low Power Management – Global Reset/Asynchronous Reset Options – 4 Additional Dedicated PCI Clocks Cache Logic® Dynamic Full/Partial Re-configurability In-System – Unlimited Re-programmability via Serial or Parallel Modes – Enables Adaptive Designs – Enables Fast Vector Multiplier Updates – QuickChange™ Tools for Fast, Easy Design Changes Pin-compatible Package Options – Plastic Leaded Chip Carriers (PLCC) – Thin, Plastic Quad Flat Packs (LQFP, TQFP, PQFP) Industry-standard Design Tools – Seamless Integration (Libraries, Interface, Full Back-annotation) with Everest, Exemplar™, Mentor®, OrCAD®, Synopsys®, Verilog®, Viewlogic®, Synplicity® – Timing Driven Placement & Routing – Automatic/Interactive Multi-chip Partitioning – Fast, Efficient Synthesis – Over 75 Automatic Component Generators Create 1000s of Reusable, Fully Deterministic Logic and RAM Functions Easy Migration to Atmel Gate Arrays for High Volume Production Supply Voltage 3.3V 5V I/O Tolerant 5K - 50K Gates Coprocessor FPGA with FreeRAM™ AT40K05AL AT40K10AL AT40K20AL AT40K40AL Summary Rev. 2818ES–FPGA–1/04 Note: This is a summary document. A complete document is available on our web site at www.atmel.com. 1 Table 1. AT40KAL Family(1) Device Usable Gates Rows x Columns Cells AT40K10AL AT40K20AL AT40K40AL 5K - 10K 10K - 20K 20K - 30K 40K - 50K 16 x 16 24 x 24 32 x 32 48 x 48 256 576 1,024 2,304 (1) (1) (1) 3,048(1) Registers 496 RAM Bits 2,048 4,608 8,192 18,432 128 192 256 384 I/O (Maximum) Note: Description AT40K05AL 954 1,520 1. Packages with FCK will have 8 less registers. The AT40KAL is a family of fully PCI-compliant, SRAM-based FPGAs with distributed 10 ns programmable synchronous/asynchronous, dual-port/single-port SRAM, 8 global clocks, Cache Logic ability (partially or fully reconfigurable without loss of data), automatic component generators, and range in size from 5,000 to 50,000 usable gates. I/O counts range from 128 to 384 in industry standard packages ranging from 84-pin PLCC to 352-ball Square BGA, and support 3.3V designs. The AT40KAL is designed to quickly implement high-performance, large gate count designs through the use of synthesis and schematic-based tools used on a PC or Sun platform. Atmel’s design tools provide seamless integration with industry standard tools such as Synplicity, ModelSim, Exemplar and Viewlogic. See the “IDS Datasheet” available on the Atmel web site (http://www.atmel.com/atmel/acrobat/doc1421.pdf) for a list of other supported tools. The AT40KAL can be used as a coprocessor for high-speed (DSP/processor-based) designs by implementing a variety of computation intensive, arithmetic functions. These include adaptive finite impulse response (FIR) filters, fast Fourier transforms (FFT), convolvers, interpolators and discrete-cosine transforms (DCT) that are required for video compression and decompression, encryption, convolution and other multimedia applications. Fast, Flexible and Efficient SRAM The AT40KAL FPGA offers a patented distributed 10 ns SRAM capability where the RAM can be used without losing logic resources. Multiple independent, synchronous or asynchronous, dual-port or single-port RAM functions (FIFO, scratch pad, etc.) can be created using Atmel’s macro generator tool. Fast, Efficient Array and Vector Multipliers The AT40KAL’s patented 8-sided core cell with direct horizontal, vertical and diagonal cell-to-cell connections implements ultra fast array multipliers without using any busing resources. The AT40KAL’s Cache Logic capability enables a large number of design coefficients and variables to be implemented in a very small amount of silicon, enabling vast improvement in system speed at much lower cost than conventional FPGAs. 2 AT40KAL Series FPGA 2818ES–FPGA–1/04 AT40KAL Series FPGA Cache Logic Design The AT40KAL, AT6000 and FPSLIC families are capable of implementing Cache Logic (dynamic full/partial logic reconfiguration, without loss of data, on-the-fly) for building adaptive logic and systems. As new logic functions are required, they can be loaded into the logic cache without losing the data already there or disrupting the operation of the rest of the chip; replacing or complementing the active logic. The AT40KAL can act as a reconfigurable coprocessor. Automatic Component Generators The AT40KAL FPGA family is capable of implementing user-defined, automatically generated, macros in multiple designs; speed and functionality are unaffected by the macro orientation or density of the target device. This enables the fastest, most predictable and efficient FPGA design approach and minimizes design risk by reusing already proven functions. The Automatic Component Generators work seamlessly with industry standard schematic and synthesis tools to create the fastest, most efficient designs available. The patented AT40KAL series architecture employs a symmetrical grid of small yet powerful cells connected to a flexible busing network. Independently controlled clocks and resets govern every column of cells. The array is surrounded by programmable I/O. Devices range in size from 5,000 to 50,000 usable gates in the family, and have 256 to 3,048 registers. Pin locations are consistent throughout the AT40KAL series for easy design migration in the same package footprint. The AT40KAL series FPGAs utilize a reliable 0.35µ triple-metal, CMOS process and are 100% factory-tested. Atmel’s PCand workstation-based integrated development system (IDS) is used to create AT40KAL series designs. Multiple design entry methods are supported. The Atmel architecture was developed to provide the highest levels of performance, functional density and design flexibility in an FPGA. The cells in the Atmel array are small, efficient and can implement any pair of Boolean functions of (the same) three inputs or any single Boolean function of four inputs. The cell’s small size leads to arrays with large numbers of cells, greatly multiplying the functionality in each cell. A simple, high-speed busing network provides fast, efficient communication over medium and long distances. For a complete version of this datasheet, refer to the FPGA section of the Atmel web site, www.atmel.com. 3 2818ES–FPGA–1/04 Atmel Corporation 2325 Orchard Parkway San Jose, CA 95131, USA Tel: 1(408) 441-0311 Fax: 1(408) 487-2600 Regional Headquarters Europe Atmel Sarl Route des Arsenaux 41 Case Postale 80 CH-1705 Fribourg Switzerland Tel: (41) 26-426-5555 Fax: (41) 26-426-5500 Asia Room 1219 Chinachem Golden Plaza 77 Mody Road Tsimshatsui East Kowloon Hong Kong Tel: (852) 2721-9778 Fax: (852) 2722-1369 Japan 9F, Tonetsu Shinkawa Bldg. 1-24-8 Shinkawa Chuo-ku, Tokyo 104-0033 Japan Tel: (81) 3-3523-3551 Fax: (81) 3-3523-7581 Atmel Operations Memory 2325 Orchard Parkway San Jose, CA 95131, USA Tel: 1(408) 441-0311 Fax: 1(408) 436-4314 RF/Automotive Theresienstrasse 2 Postfach 3535 74025 Heilbronn, Germany Tel: (49) 71-31-67-0 Fax: (49) 71-31-67-2340 Microcontrollers 2325 Orchard Parkway San Jose, CA 95131, USA Tel: 1(408) 441-0311 Fax: 1(408) 436-4314 La Chantrerie BP 70602 44306 Nantes Cedex 3, France Tel: (33) 2-40-18-18-18 Fax: (33) 2-40-18-19-60 ASIC/ASSP/Smart Cards 1150 East Cheyenne Mtn. Blvd. Colorado Springs, CO 80906, USA Tel: 1(719) 576-3300 Fax: 1(719) 540-1759 Biometrics/Imaging/Hi-Rel MPU/ High Speed Converters/RF Datacom Avenue de Rochepleine BP 123 38521 Saint-Egreve Cedex, France Tel: (33) 4-76-58-30-00 Fax: (33) 4-76-58-34-80 Zone Industrielle 13106 Rousset Cedex, France Tel: (33) 4-42-53-60-00 Fax: (33) 4-42-53-60-01 1150 East Cheyenne Mtn. Blvd. Colorado Springs, CO 80906, USA Tel: 1(719) 576-3300 Fax: 1(719) 540-1759 Scottish Enterprise Technology Park Maxwell Building East Kilbride G75 0QR, Scotland Tel: (44) 1355-803-000 Fax: (44) 1355-242-743 Literature Requests www.atmel.com/literature Disclaimer: Atmel Corporation makes no warranty for the use of its products, other than those expressly contained in the Company’s standard warranty which is detailed in Atmel’s Terms and Conditions located on the Company’s web site. The Company assumes no responsibility for any errors which may appear in this document, reserves the right to change devices or specifications detailed herein at any time without notice, and does not make any commitment to update the information contained herein. No licenses to patents or other intellectual property of Atmel are granted by the Company in connection with the sale of Atmel products, expressly or by implication. Atmel’s products are not authorized for use as critical components in life support devices or systems. ©Atmel Corporation 2004. All rights reserved. Atmel® and combinations thereof, Cache Logic® are the registered trademarks, and FreeRAM ™ and QuickChange ™ are the trademarks of Atmel Corporation or its subsidiaries. Verilog ® and OrCAD ® are the registered trademarks of Cadence Design Systems, Inc. Mentor ® is the registered trademark, and Exemplar ™ is the trademark of Mentor Graphics. Synopsys® is the registered trademark of Synopsis, Inc. Viewlogic™ is the trademark of Viewlogic Systems, Inc. Synplicity ® is the registered trademark of Synplify, Inc. Other terms and product names may be the trademarks of others. Printed on recycled paper. 2818ES–FPGA–1/04 xM