Vishay B120 Surface mount schottky barrier rectifier Datasheet

New Product
B120 thru B160
Vishay General Semiconductor
Surface Mount Schottky Barrier Rectifier
FEATURES
• Low profile package
• Ideal for automated placement
• Guardring for overvoltage protection
• Low power losses, high efficiency
• Low forward voltage drop
• High surge capability
• Meets MSL level 1, per J-STD-020, LF maximum
peak of 260 °C
DO-214AC (SMA)
• Solder dip 260 °C, 40 s
• Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
TYPICAL APPLICATIONS
For use in low voltage, high frequency inverters,
freewheeling, dc-to-dc converters and polarity
protection applications.
(Note: These devices are not Q101 qualified.)
PRIMARY CHARACTERISTICS
IF(AV)
1.0 A
VRRM
20 V to 60 V
IFSM
30 A
VF
0.52 V, 0.75 V
TJ max.
125 °C, 150 °C
MECHANICAL DATA
Case: DO-214AC (SMA)
Epoxy meets UL 94V-0 flammability rating
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD22-B102
E3 suffix for consumer grade, meets JESD 201 class
1A whisker test
Polarity: Color band denotes the cathode end
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Device marking code
B120
B130
B140
B150
B160
UNIT
B12
B13
B14
B15
B16
V
20
30
40
50
60
Maximum repetitive peak reverse voltage
VRRM
Maximum average forward rectified current (Fig. 1)
IF(AV)
1.0
A
Peak forward surge current 8.3 ms single half sine-wave
superimposed on rated load
IFSM
30
A
Voltage rate of change (rated VR)
dV/dt
10 000
V/µs
Operating junction temperature range
Storage temperature range
Document Number: 88946
Revision: 19-May-08
TJ
TSTG
- 65 to + 125
- 65 to + 150
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
- 65 to + 150
V
°C
°C
www.vishay.com
1
New Product
B120 thru B160
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
Maximum instantaneous
forward voltage (1)
SYMBOL
1.0 A
B120
B130
VF
TA = 25 °C
TA = 100 °C
Maximum reverse
current at rated VR (2)
B140
B150
0.52
B160
UNIT
0.75
V
0.2
IR
6.0
mA
5.0
Notes:
(1) Pulse test: 300 µs pulse width, 1 % duty cycle
(2) Pulse test: Pulse width ≤ 40 ms
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
B120
B130
B140
RθJA
RθJL
Typical thermal resistance (1)
B150
B160
UNIT
95
30
°C/W
Note:
(1) P.C.B. mounted with 0.2 x 0.2" (5.0 x 5.0 mm) copper pad areas
ORDERING INFORMATION (Example)
PREFERRED P/N
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
B140-E3/61T
0.064
61T
1800
7" diameter plastic tape and reel
B140-E3/5AT
0.064
5AT
7500
13" diameter plastic tape and reel
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 °C unless otherwise noted)
0.8
Resistive or Inductive Load
B120 ~ B140
B150 ~ B160
0.8
B120 ~ B140
0.6
0.4
P.C.B. Mounted on
0.2 x 0.2" (5.0 x 5.0 mm)
Copper Pad Areas
0.2
D = 0.8
0.7
1.0
Average Power Loss (W)
Average Forward Rectified Current (A)
1.2
D = 0.5
0.6
D = 0.3
0.5
D = 0.2
D = 1.0
D = 0.1
0.4
0.3
T
0.2
0.1
0
D = tp/T
tp
0
0
25
50
75
100
125
150
0
0.2
0.4
0.6
0.8
1.0
1.2
Lead Temperature (°C)
Average Forward Current
Figure 1. Maximum Forward Current Derating Curve
Figure 2. Forward Power Loss Characteristics
www.vishay.com
2
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
Document Number: 88946
Revision: 19-May-08
New Product
B120 thru B160
Vishay General Semiconductor
10
0.8
B150 ~ B160
Average Power Loss (W)
0.7
Instantaneous Forward Current (A)
D = 0.8
D = 0.5
0.6
D = 0.3
0.5
D = 0.2
D = 1.0
D = 0.1
0.4
0.3
T
0.2
0.1
D = tp/T
tp
0
0.2
1
TJ = 25 °C
0.1
B150 ~ B160
0.4
0.6
0.8
1.0
0
1.2
0.2
0.4
0.6
0.8
1.0
1.2
1.4
Average Forward Current (A)
Instantaneous Forward Voltage (V)
Figure 3. Forward Power Loss Characteristics
Figure 6. Typical Instantaneous Forward Characteristics
100 000
Instantaneous Reverse Current (µA)
40
Peak Forward Surge Current (A)
TJ = 125 °C
0.01
0
30
20
10
B120 ~ B140
B150 ~ B160
TJ = 150 °C
10 000
1000
100
TJ = 125 °C
TJ = 25 °C
10
1
0.1
0
1
10
100
10
20
30
40
50
60
70
80
90
100
Number of Cycles at 50 Hz
Percent of Rated Peak Reverse Voltage (%)
Figure 4. Typical Instantaneous Forward Characteristics
Figure 7. Typical Reverse Leakage Characteristics
10
1000
TJ = 150 °C
Junction Capacitance (pF)
Instantaneous Forward Current (A)
TJ = 150 °C
TJ = 125 °C
1
TJ = 25 °C
0.1
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
100
B120 ~ B140
B150 ~ B160
B120 ~ B140
10
0.01
0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
0.1
1
10
100
Instantaneous Forward Voltage (V)
Reverse Voltage (V)
Figure 5. Typical Instantaneous Forward Characteristics
Figure 8. Typical Junction Capacitance
Document Number: 88946
Revision: 19-May-08
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
www.vishay.com
3
New Product
B120 thru B160
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-214AC (SMA)
Cathode Band
Mounting Pad Layout
0.110 (2.79)
0.100 (2.54)
0.065 (1.65)
0.049 (1.25)
0.177 (4.50)
0.157 (3.99)
0.012 (0.305)
0.006 (0.152)
0.060 (1.52)
MIN.
0.208 (5.28)
REF.
0.090 (2.29)
0.078 (1.98)
0.060 (1.52)
0.030 (0.76)
0.074 (1.88)
MAX.
0.066 (1.68)
MIN.
0.008 (0.203)
0 (0)
0.208 (5.28)
0.194 (4.93)
www.vishay.com
4
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
Document Number: 88946
Revision: 19-May-08
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
Similar pages