ATMEL ATF22V10BQ-15JC Highperformance ee pld Datasheet

Features
• Industry Standard Architecture
– Low-cost Easy-to-use Software Tools
• High-speed, Electrically-erasable Programmable Logic Devices
– 7.5 ns Maximum Pin-to-pin Delay
• Several Power Saving Options
Device
ICC, Standby
ICC , Active
85 mA
90 mA
35 mA
40 mA
5 mA
20 mA
ATF22V10B
ATF22V10BQ(1)
ATF22V10BQL
Notes:
(2)
Highperformance
EE PLD
1. The shaded devices are obsolete. Suggested replacement: ATF22V10CQ
2. The shaded devices are obsolete. Suggested replacement: ATF22V10CQZ
• CMOS and TTL Compatible Inputs and Outputs
– Input and I/O Pull-up Resistors
• Advanced Flash Technology
•
•
•
•
ATF22V10B
– Reprogrammable
– 100% Tested
High-reliability CMOS Process
– 20-year Data Retention
– 100 Erase/Write Cycles
– 2,000V ESD Protection
– 200 mA Latchup Immunity
Full Military, Commercial, and Industrial Temperature Ranges
Dual-in-line and Surface Mount Packages in Standard Pinouts
PCI Compliant
Logic Diagram
TSSOP
CLK/IN
IN
IN
IN
IN
IN
IN
IN
IN
IN
IN
GND
Pin Configurations
All Pinouts Top View
Logic Inputs
I/O
Bidirectional Buffers
*
No Internal Connection
VCC
+5V Supply
DIP/SOIC
CLK/IN
IN
IN
IN
IN
IN
IN
IN
IN
IN
IN
GND
1
2
3
4
5
6
7
8
9
10
11
12
24
23
22
21
20
19
18
17
16
15
14
13
LCC/PLCC
VCC
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
IN
IN
IN
CLK/IN
*
VCC
I/O
I/O
IN
IN
IN
IN
*
IN
IN
IN
4
3
2
1
28
27
26
Clock
5
6
7
8
9
10
11
25
24
23
22
21
20
19
12
13
14
15
16
17
18
Function
CLK
VCC
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
IN
24
23
22
21
20
19
18
17
16
15
14
13
I/O
I/O
I/O
*
I/O
I/O
I/O
Rev. 0250L–PLD–06/03
IN
IN
GND
*
IN
I/O
I/O
Pin Name
1
2
3
4
5
6
7
8
9
10
11
12
1
Description
The ATF22V10B is a high-performance CMOS (electrically-erasable) programmable logic device (PLD) which
utilizes Atmel’s proven electrically-erasable Flash memory
technology. Speeds down to 7.5 ns and power dissipation
as low as 10 mA are offered. All speed ranges are specified
over the full 5V ± 10% range for military and industrial
temperature ranges, and 5V ± 5% for commercial temperature ranges.
Several low-power options allow selection of the best solution for various types of power-limited applications. Each of
these options significantly reduces total system power and
enhances system reliability.
Absolute Maximum Ratings*
Temperature Under Bias................................ -55°C to +125°C
*NOTICE:
Storage Temperature ..................................... -65°C to +150°C
Voltage on Any Pin with
Respect to Ground .........................................-2.0V to +7.0V(1)
Voltage on Input Pins
with Respect to Ground
During Programming.....................................-2.0V to +14.0V(1)
Note:
Programming Voltage with
Respect to Ground .......................................-2.0V to +14.0V(1)
Stresses beyond those listed under “Absolute
Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and
functional operation of the device at these or any
other conditions beyond those indicated in the
operational sections of this specification is not
implied. Exposure to absolute maximum rating
conditions for extended periods may affect device
reliability.
1. Minimum voltage is -0.6V DC, which may undershoot to -2.0V for pulses of less than 20 ns.
Maximum output pin voltage is VCC + 0.75V DC,
which may overshoot to 7.0V for pulses of less
than 20 ns.
DC and AC Operating Conditions
Operating Temperature
VCC Power Supply
Note:
2
1. The shaded devices are obsolete.
ATF22V10B
Commercial
Industrial
Military
0°C - 70°C
(Ambient)
-40°C - 85°C
(Ambient)
-55°C - 125°C
(Case)
5V ± 5%
5V ± 10%
5V ± 10%
ATF22V10B
DC Characteristics
Symbol
Parameter
Condition
IIL
Input or I/O
Low Leakage Current
0 ≤ VIN ≤
VIL (Max)
IIH
Input or I/O
High Leakage Current
3.5 ≤ VIN ≤ VCC
ICC
Power Supply Current,
Standby
VCC = Max,
VIN = Max,
Outputs Open
Min
Typ
Max
Units
-35
-100
µA
10
µA
Com.
85
120
mA
Ind., Mil.
85
140
mA
Com./Ind.
85/85
120/140
mA
85
140
mA
65/65
90/115
mA
Mil.
65
115
mA
Com.
65
90
mA
Ind., Mil.
65
115
mA
Com.
35
55
mA
Com.
5
10
mA
Ind., Mil.
5
15
mA
Com.
90
120
mA
Mil., Ind.
90
145
mA
Com./Ind.
90/90
120/145
mA
90
145
mA
65/65
90/120
mA
Mil.
65
120
mA
Com.
65
90
mA
Ind., Mil.
65
120
mA
Com.
40
60
mA
Com.
20
50
mA
Ind., Mil.
20
70
mA
-130
mA
B-7
B-10
Mil.
Com./Ind.
B-15
ICC
Power Supply Current,
Standby
VCC = Max,
VIN = Max,
Outputs Open
B-25
BQ-15
BQL-20, -25
B-7
B-10
Mil.
ICC2
Clocked Power
Supply Current
VCC = Max,
Outputs Open,
f = 15 MHz
Com./Ind.
B-15
B-25
BQ-15
BQL-20, -25
IOS(1)
Output Short
Circuit Current
VIL
Input Low Voltage
-0.5
0.8
V
VIH
Input High Voltage
2.0
VCC + 0.75
V
VOL
Output Low Voltage
VOH
Notes:
VOUT = 0.5V
VIN = VIH or VIL,
VCC = Min
IOL = 16 mA
Com., Ind.
0.5
V
IOL = 12 mA
Mil.
0.5
V
VIN = V IH or VIL,
2.4
IOH = -4.0 mA
VCC = Min
1. Not more than one output at a time should be shorted. Duration of short circuit test should not exceed 30 sec.
2. The shaded devices are obsolete.
Output High Voltage
V
3
AC Waveforms(1)
Note:
1. Timing measurement reference is 1.5V. Input AC driving levels are 0.0V and 3.0V, unless otherwise specified.
AC Characteristics(1)
-7
-10
-15
-20
-25
Min
Max
Min
Max
Min
Max
Min
Max
Min
Max
Units
Input or Feedback to
Combinatorial Output
3
7.5
3
10
3
15
3
20
3
25
ns
tCO
Clock to Output
2
4.5(2)
2
6.5
2
8
2
12
2
15
ns
tCF
Clock to Feedback
13
ns
tS
Input or Feedback Setup Time
tH
Hold Time
Symbol
Parameter
tPD
2.5
2.5
2.5
3.5
4.5
10
0
0
0
External Feedback 1/(tS + tCO)
125(3)
90
Internal Feedback 1/(tS + tCF )
166
No Feedback 1/(tWH + tWL)
tW
8
15
ns
0
0
ns
55.5
38.5
33.3
MHz
142
69
45.5
40
MHz
166
142
83.3
38.5
MHz
Clock Width (tWL and tWH)
3
3.5
6
13
ns
tEA
Input or I/O to Output Enable
3
7.5
3
10
3
15
3
20
3
25
ns
tER
Input or I/O to Output Disable
3
7.5
3
9
3
15
3
20
3
25
ns
tAP
Input or I/O to Asynchronous
Reset of Register
3
10
3
12
3
20
3
22
3
25
ns
tAW
Asynchronous Reset Width
7
8
15
20
25
ns
tAR
Asynchronous Reset
Recovery Time
5
6
10
20
25
ns
tSP
Setup Time, Synchronous Preset
4.5
6
10
14
15
ns
8
10
14
15
ns
fMAX
tSPR
Notes:
4
1.
2.
3.
4.
Synchronous Preset to
5
Clock Recovery Time
See ordering information for valid part numbers.
5.5 ns for DIP package devices.
111 MHz for DIP package devices.
The shaded devices are obsolete.
ATF22V10B
14
10
ATF22V10B
Input Test Waveforms and
Measurement Levels
Output Test Loads
Commercial
Military
tR, tF < 3 ns
* All except -7 which is R2 = 300Ω
Pin Capacitance
f = 1 MHz, T = 25°C(1)
Typ
Max
Units
CIN
5
8
pF
VIN = 0V
COUT
6
8
pF
VOUT = 0V
Note:
Conditions
1. Typical values for nominal supply voltage. This parameter is only sampled and is not 100% tested.
Power-up Reset
The registers in the ATF22V10Bs are designed to reset
during power-up. At a point delayed slightly from VCC crossing V RST , all registers will be reset to the low state. The
output state will depend on the polarity of the output buffer.
This feature is critical for state machine initialization. However, due to the asynchronous nature of reset and the
uncertainty of how V CC actually rises in the system, the
following conditions are required:
1. The VCC rise must be monotonic,
2. After reset occurs, all input and feedback setup times
must be met before driving the clock pin high, and
3. The clock must remain stable during tPR.
Preload of Registered Outputs
The ATF22V10B’s registers are provided with circuitry to
allow loading of each register with either a high or a low.
This feature will simplify testing since any state can be
forced into the registers to control test sequencing. A
JEDEC file with preload is generated when a source file
with vectors is compiled. Once downloaded, the JEDEC file
preload sequence will be done automatically by most of the
approved programmers after the programming.
Parameter
Description
Typ
Max
Units
tPR
Power-up
Reset Time
600
1,000
ns
VRST
Power-up
Reset
Voltage
3.8
4.5
V
Security Fuse Usage
A single fuse is provided to prevent unauthorized copying
of the ATF22V10B fuse patterns. Once programmed, fuse
verify and preload are inhibited. However, the 64-bit User
Signature remains accessible.
The security fuse should be programmed last, as its effect
is immediate.
5
Electronic Signature Word
Input and I/O Pull-ups
There are 64 bits of programmable memory that are always
available to the user, even if the device is secured. These
bits can be used for user-specific data.
All ATF22V10B family members have internal input and I/O
pull-up resistors. Therefore, whenever inputs or I/Os are
not being driven externally, they will float to V CC. This
ensures that all logic array inputs are at known states.
These are relatively weak active pull-ups that can easily be
overdriven by TTL-compatible drivers (see input and I/O
diagrams below).
Programming/Erasing
Pro gr ammin g/e ra sing is p erfo rme d usin g s tan da rd
P L D p r o g ra m m e r s . S e e C MO S P L D Pr o g ra mm in g
Ha rdw are a nd Softwa re Su pp ort for in fo rmation on
software/programming.
Input Diagram
6
I/O Diagram
ATF22V10B
ATF22V10B
Functional Logic Diagram ATF22V10B
7
8
ATF22V10B
ATF22V10B
9
10
ATF22V10B
ATF22V10B
ATF22V10B Ordering Information
tPD (ns)
tS (ns)
tCO (ns)
7.5
3.5
10
4.5
15
25
Notes:
10
15
Ordering Code
Package
4.5
ATF22V10B-7JC(1)
ATF22V10B-7PC(1)
ATF22V10B-7SC(1)
ATF22V10B-7XC(1)
28J
24P3
24S
24X
Commercial
(0°C to 70°C)
6.5
ATF22V10B-10JC(1)
ATF22V10B-10PC(1)
ATF22V10B-10SC(1)
ATF22V10B-10XC(1)
28J
24P3
24S
24X
Commercial
(0°C to 70°C)
ATF22V10B-10JI(1)
ATF22V10B-10PI(1)
ATF22V10B-10SI(1)
ATF22V10B-10XI(1)
28J
24P3
24S
24X
Industrial
(-40°C to 85°C)
ATF22V10B-10GM/883
ATF22V10B-10NM/883
24D3
28L
Military/883C
(-55°C to 125°C)
Class B, Fully Compliant
5962-89841 06LA
5962-89841 063X
24D3
28L
Military
(-55°C to 125°C)
Class B, Fully Compliant
ATF22V10B-15JC(1)
ATF22V10B-15PC(1)
ATF22V10B-15SC(1)
ATF22V10B-15XC(1)
28J
24P3
24S
24X
Commercial
(0°C to 70°C)
ATF22V10B-15JI(1)
ATF22V10B-15PI(1)
ATF22V10B-15SI(1)
ATF22V10B-15XI(1)
28J
24P3
24S
24X
Industrial
(-40°C to 85°C)
ATF22V10B-15GM/883
ATF22V10B-15NM/883
24D3
28L
Military/883C
(-55°C to 125°C)
Class B, Fully Compliant
5962-89841 03LA
5962-89841 033X
24D3
28L
Military
(-55°C to 125°C)
Class B, Fully Compliant
ATF22V10B-25JC
ATF22V10B-25PC
ATF22V10B-25SC
ATF22V10B-25XC
28J
24P3
24S
24X
Commercial
(0°C to 70°C)
28J
24P3
24S
24X
Industrial
(-40°C to 85°C)
8
15
ATF22V10B-25JI
ATF22V10B-25PI
ATF22V10B-25SI
ATF22V10B-25XI
1. Recommend ATF22V10C versions.
2. The shaded devices are obsolete.
Operation Range
11
ATF22V10BQ(L) Ordering Information
tPD (ns)
tCO (ns)
Ordering Code
Package
(1)
Operation Range
15
10
8
ATF22V10BQ-15JC
ATF22V10BQ-15PC (1)
ATF22V10BQ-15SC (1)
ATF22V10BQ-15XC (1)
28J
24P3
24S
24X
Commercial
(0°C to 70°C)
20
14
12
ATF22V10BQL-20JC(1)
ATF22V10BQL-20PC(1)
ATF22V10BQL-20SC(1)
ATF22V10BQL-20XC(1)
28J
24P3
24S
24X
Commercial
(0°C to 70°C)
ATF22V10BQL-20JI(1)
ATF22V10BQL-20PI(1)
ATF22V10BQL-20SI(1)
ATF22V10BQL-20XI(1)
28J
24P3
24S
24X
Industrial
(-40°C to 85°C)
ATF22V10BQL-20GM/883
ATF22V10BQL-20NM/883
24D3
28L
Military/883C
(-55°C to 125°C)
Class B, Fully Compliant
5962-89841 14 LA
5962-89841 14 3X
24D3
28L
Military
(-55°C to 125°C)
Class B, Fully Compliant
ATF22V10BQL-25JC
ATF22V10BQL-25PC
ATF22V10BQL-25SC
ATF22V10BQL-25XC
28J
24P3
24S
24X
Commercial
(0°C to 70°C)
ATF22V10BQL-25JI
ATF22V10BQL-25PI
ATF22V10BQL-25SI
ATF22V10BQL-25XI
28J
24P3
24S
24X
Industrial
(-40°C to 85°C)
ATF22V10BQL-25GM/883
ATF22V10BQL-25NM/883
24D3
28L
Military/883C
(-55°C to 125°C)
Class B, Fully Compliant
5962-89841 13 LA
5962-89841 13 3X
24D3
28L
Military
(-55°C to 125°C)
Class B, Fully Compliant
25
Notes:
12
tS (ns)
15
15
1. Recommend ATF22V10CQ and ATF22V10CQZ
2. The shaded devices are obsolete.
ATF22V10B
ATF22V10B
Package Information
24D3
24D3, 24-lead, 0.300"Wide. Non-windowed,
Ceramic Dual Inline Parkage (Cerdip)
Dimensions in Millimeters and (Inches)*
MIL-STD-1835 D-9 CONFIG A (Glass Sealed)
32.51(1.280)
31.50(1.240)
PIN
1
7.87(0.310)
7.24(0.285)
27.94(1.100) REF
5.08(0.200)
MAX
0.127(0.005) MIN
SEATING
PLANE
5.08(0.200)
3.18(0.125)
2.45(0.100)BSC
0.46(0.018)
0.20(0.008)
1.65(0.065)
1.14(0.045)
1.52(0.060)
0.38(0.015)
0.66(0.026)
0.36(0.014)
8.13(0.320)
7.37(0.290)
0º~ 15º REF
10.20(0.400) MAX
*Controlling dimension: Inches
REV. A
04/11/2001
13
28L
28L, 28-pad, Non-windowed, Ceramic lid, Leadless Chip
Carrier (LCC)
Dimensions in Millimeters and (Inches)*
MIL-STD-1835 C-4
11.68(0.460)
11.23(0.442)
2.54(0.100)
2.16(0.085)
11.68(0.460)
11.23(0.442)
PIN 1
2.41(0.095)
1.91(0.075)
1.40(0.055)
1.14(0.045)
1.91(0.075)
1.40(0.055)
INDEX CORNER
0.635(0.025)
X 45˚
0.381(0.015)
0.305(0.012)
RADIUS
0.178(0.007)
7.62(0.300) BSC
0.737(0.029)
0.533(0.021)
1.27(0.050) TYP
1.02(0.040) X 45˚
7.62(0.300) BSC
*Controlling dimension: Inches
14
ATF22V10B
2.16(0.085)
1.65(0.065)
Atmel Corporation
2325 Orchard Parkway
San Jose, CA 95131
Tel: 1(408) 441-0311
Fax: 1(408) 487-2600
Regional Headquarters
Europe
Atmel Sarl
Route des Arsenaux 41
Case Postale 80
CH-1705 Fribourg
Switzerland
Tel: (41) 26-426-5555
Fax: (41) 26-426-5500
Asia
Room 1219
Chinachem Golden Plaza
77 Mody Road Tsimshatsui
East Kowloon
Hong Kong
Tel: (852) 2721-9778
Fax: (852) 2722-1369
Japan
9F, Tonetsu Shinkawa Bldg.
1-24-8 Shinkawa
Chuo-ku, Tokyo 104-0033
Japan
Tel: (81) 3-3523-3551
Fax: (81) 3-3523-7581
Atmel Operations
Memory
2325 Orchard Parkway
San Jose, CA 95131
Tel: 1(408) 441-0311
Fax: 1(408) 436-4314
RF/Automotive
Theresienstrasse 2
Postfach 3535
74025 Heilbronn, Germany
Tel: (49) 71-31-67-0
Fax: (49) 71-31-67-2340
Microcontrollers
2325 Orchard Parkway
San Jose, CA 95131
Tel: 1(408) 441-0311
Fax: 1(408) 436-4314
La Chantrerie
BP 70602
44306 Nantes Cedex 3, France
Tel: (33) 2-40-18-18-18
Fax: (33) 2-40-18-19-60
ASIC/ASSP/Smart Cards
1150 East Cheyenne Mtn. Blvd.
Colorado Springs, CO 80906
Tel: 1(719) 576-3300
Fax: 1(719) 540-1759
Biometrics/Imaging/Hi-Rel MPU/
High Speed Converters/RF Datacom
Avenue de Rochepleine
BP 123
38521 Saint-Egreve Cedex, France
Tel: (33) 4-76-58-30-00
Fax: (33) 4-76-58-34-80
Zone Industrielle
13106 Rousset Cedex, France
Tel: (33) 4-42-53-60-00
Fax: (33) 4-42-53-60-01
1150 East Cheyenne Mtn. Blvd.
Colorado Springs, CO 80906
Tel: 1(719) 576-3300
Fax: 1(719) 540-1759
Scottish Enterprise Technology Park
Maxwell Building
East Kilbride G75 0QR, Scotland
Tel: (44) 1355-803-000
Fax: (44) 1355-242-743
Literature Requests
www.atmel.com/literature
Web Site
www.atmel.com
Disclaimer: Atmel Corporation makes no warranty for the use of its products, other than those expressly contained in the Company’s standard
warranty which is detailed in Atmel’s Terms and Conditions located on the Company’s web site. The Company assumes no responsibility for any
errors which may appear in this document, reserves the right to change devices or specifications detailed herein at any time without notice, and
does not make any commitment to update the information contained herein. No licenses to patents or other intellectual property of Atmel are
granted by the Company in connection with the sale of Atmel products, expressly or by implication. Atmel’s products are not authorized for use
as critical components in life support devices or systems.
© Atmel Corporation 2003. All rights reserved. Atmel® and combinations thereof, are the registered
trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be the trademarks of
others.
Printed on recycled paper.
0250L–06/03/xM
Similar pages