MABA-011039 1:4 Step up Flux Coupled Balun Transformer 1 - 300 MHz Rev. V2 Features Surface Mount 1:4 Impedance RoHS Compliant and Lead free 260°C Reflow Compatible Excellent temperature stability Available on Tape and Reel Suitable for all CATV, Broadband and FTTX applications. Description MABA-011039 is a 1:4 flux coupled transmission. This transformer is ideally suited for CATV and Broadband applications. Functional Schematic Pin Configuration Ordering Information MABA-011039 Tape & Reel MABA-011039-TB Customer Test Board 1 Primary Dot (input) 2 Primary (ground) 3 Secondary (output2) 4 Centre Tap (ground) 5 Secondary Dot (output1) 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MABA-011039 1:4 Step up Flux Coupled Balun Transformer 1 - 300 MHz Rev. V2 Electrical Specifications: TA = 25°C, Z0 = 75 Ω, Pin = 0dBm Frequency Range - MHz 1 300 Impedance - Ω - 75 - Impedance Ratio - - - 1:4 - Insertion Loss 1 (Pin1 - Pin5) 1 - 300 MHz dB - 0.7 1.1 Insertion Loss 2 (Pin1 - Pin3) 1 - 300 MHz dB - 0.6 1.1 Amplitude Balance 1 - 300 MHz dB - 0.05 ±0.5 Phase Balance 1 - 300 MHz ͦ - 0.2 ±3.0 Input Return Loss (Pin1) 1 - 300 MHz dB 14 21 - Recommended Maximum Ratings Input RF Power MW - 2000 DC Current mA - 1500 Operating Temperature Range ºC -40 +125 Full temperature plots available on request 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MABA-011039 1:4 Step up Flux Coupled Balun Transformer 1 - 300 MHz Rev. V2 PCB layout Application Schematic 3 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MABA-011039 1:4 Step up Flux Coupled Balun Transformer 1 - 300 MHz Rev. V2 Typical Performance Curves Electrical Specifications: TA = 25°C, Z0 = 75 Ω, Pin = 0dBm 4 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MABA-011039 1:4 Step up Flux Coupled Balun Transformer 1 - 300 MHz Rev. V2 Tape & Reel Information Outline Drawing Parameter Units Value Qty per reel - 2000 Reel Size mm 330 Tape Width mm 12.00 Pitch mm 8.00 Ao mm 4.40 Bo mm 4.00 Ko mm 3.90 Orientation - F26 Reference Application Note ANI-019 for orientation 1. 2. 3. 4. Dimensions in mm. Tolerance: ±0.2mm unless otherwise noted. Model number and lot code are printed on the reel. Lead plating: (CuSn6) Lead Finish SAC-305. Carrier Tape Orientation Pin1 5 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MABA-011039 1:4 Step up Flux Coupled Balun Transformer 1 - 300 MHz Rev. V2 M/A-COM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. 6 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support