TI LT1014AMFKB Quad precision operational amplifier Datasheet

LT1014, LT1014A, LT1014D
QUAD PRECISION OPERATIONAL AMPLIFIERS
SLOS039C – JULY 1989 – REVISED SEPTEMBER 1999
D
D
D
D
D
D
D
D
DW PACKAGE
(TOP VIEW)
Single-Supply Operation:
Input Voltage Range Extends to Ground,
and Output Swings to Ground While
Sinking Current
Input Offset Voltage 300 µV Max at 25°C for
LT1014
Offset Voltage Temperature Coefficient
2.5 µV/°C Max for LT1014
Input Offset Current 1.5 nA Max at 25°C for
LT1014
High Gain 1.2 V/µV Min (RL = 2 kΩ), 0.5 V/µV
Min (RL = 600 Ω) for LT1014
Low Supply Current 2.2 mA Max at 25°C for
LT 1014
Low Peak-to-Peak Noise Voltage
0.55 µV Typ
Low Current Noise 0.07 pA/√Hz Typ
1OUT
1IN–
1IN+
VCC+
2IN+
2IN–
2OUT
NC
1OUT
1IN–
1IN+
VCC+
2IN+
2IN–
2OUT
The LT1014, LT1014A, and LT1014D are quad
precision operational amplifiers with 14-pin
industry-standard configuration. They feature low
offset-voltage temperature coefficient, high gain,
low supply current, and low noise.
2
15
3
14
4
13
5
12
6
11
7
10
8
9
4OUT
4IN–
4IN+
VCC–/GND
3IN+
3IN–
3OUT
NC
1
14
2
13
3
12
4
11
5
10
6
9
7
8
4OUT
4IN–
4IN+
VCC–
3IN+
3IN–
3OUT
1IN–
1OUT
NC
4OUT
4IN–
FK PACKAGE
(TOP VIEW)
1IN+
NC
VCC+
NC
2IN+
4
3
2 1 20 19
18
5
17
6
16
7
15
8
14
9 10 11 12 13
4IN+
NC
VCC–/GND
NC
3IN+
2IN–
2OUT
NC
3OUT
3IN–
The LT1014C and LT1014 AC are characterized
for operation from 0°C to 70°C. The LT1014I and
LT1014DI are characterized for operation from
–40°C to 105°C. The LT1014M, LT1014AM and
LT1014DM are characterized for operation over
the full military temperature range of –55°C to
125°C.
16
J OR N PACKAGE
(TOP VIEW)
description
The LT1014, LT1014A, and LT1014D can be
operated with both dual ±15ĆV and single 5ĆV
power supplies. The common-mode input voltage
range includes ground, and the output voltage can
also swing to within a few milivolts of ground.
Crossover distortion is eliminated.
1
NC – No internal connection
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright  1999, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
LT1014, LT1014A, LT1014D
QUAD PRECISION OPERATIONAL AMPLIFIERS
SLOS039C – JULY 1989 – REVISED SEPTEMBER 1999
AVAILABLE OPTIONS
PACKAGED DEVICES
VIO max
AT 25°C
SMALL
OUTLINE
(DW)
CHIP
CARRIER
(FK)
CERAMIC
DIP
(J)
PLASTIC
DIP
(N)
0°C to 70°C
300 µ
µV
800 µV
—
LT1014DDW
—
—
—
—
LT1014CN
LT1014DN
–40°C
40°C to 105°C
300 µ
µV
800 µV
—
LT1014DIDW
—
—
—
—
LT1014IN
LT1014DIN
–55°C to 125°C
180 µV
300 µV
µ
800 µV
—
—
LT1014DMDW
LT1014AMFK
LT1014MFK
—
LT1014AMJ
LT1014MJ
—
—
LT1014MN
LT1014DMN
TA
The DW package is available taped and reeled. Add the suffix R to the device type (e.g., LT1014DDWR).
2
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
400 Ω
400 Ω
Q21
Q1
Q5
Q22
Q2
9 kΩ
Q6
Q12
75 pF
Q28
Q27
9 kΩ
Component values are nominal.
VCC–
IN+
IN–
V CC+
Q9
Q11
Q13
5 kΩ
Q7
Q8
5 kΩ
Q29
Q4
1.6 kΩ
Q16
Q3
1.6 kΩ
Q10
10 pF
3.9 kΩ
Q14
1.6 kΩ
2 kΩ
Q19
2.5 pF
Q17
Q18
21 pF
Q15
1.3 kΩ
Q20
Q32
100 Ω
Q25
Q23
Q31
Q26
2 kΩ
10 pF
2 kΩ
4 pF
2.4 kΩ
Q30
1 kΩ
Q24
Q34
18 Ω
Q33
14 kΩ
30 Ω
42 kΩ
OUT
Q35
Q40
Q37
Q38
J1
600 Ω
Q39
Q41
Q36
800 Ω
LT1014, LT1014A, LT1014D
QUAD PRECISION OPERATIONAL AMPLIFIERS
SLOS039C – JULY 1989 – REVISED SEPTEMBER 1999
schematic (each amplifier)
3
LT1014, LT1014A, LT1014D
QUAD PRECISION OPERATIONAL AMPLIFIERS
SLOS039C – JULY 1989 – REVISED SEPTEMBER 1999
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Supply voltage (see Note 1): VCC+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 V
VCC– . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –22 V
Differential input voltage (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±30 V
Input voltage range, VI (any input) (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VCC– – 5 V to VCC+
Duration of short-circuit current at (or below) TA = 25°C (see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . Unlimited
Continuous total power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table
Operating free-air temperature range, TA: LT1014C, LT1014DC . . . . . . . . . . . . . . . . . . . . . . . . . . –0°C to 70°C
LT1014I, LT1014DI . . . . . . . . . . . . . . . . . . . . . . . . . . –40°C to 105°C
LT1014M, LT1014AM, LT1014DM . . . . . . . . . . . . . –55°C to 125°C
Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: J package . . . . . . . . . . . . . . . . . . . . . 300°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: DW or N package . . . . . . . . . . . . . . . 260°C
Case temperature for 60 seconds: FK package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values, except differential voltages, are with respect to the midpoint between VCC+ and VCC–.
2. Differential voltages are at the noninverting input with respect to the inverting input.
3. The output may be shorted to either supply.
DISSIPATION RATING TABLE
4
PACKAGE
TA ≤ 25°C
POWER RATING
DW
FK
DERATING FACTOR
ABOVE TA = 25°C
TA = 70°C
POWER RATING
TA = 105°C
POWER RATING
TA = 125°C
POWER RATING
1025 mV
8.2 mW/°C
1375 mV
11.0 mW/°C
656 mW
369 mW
205 mW
880 mW
495 mW
J
1375 mV
275 mW
11.0 mW/°C
880 mW
495 mW
275 mW
N
1150 mV
9.2 mW/°C
736 mW
414 mW
230 mW
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
LT1014, LT1014A, LT1014D
QUAD PRECISION OPERATIONAL AMPLIFIERS
SLOS039C – JULY 1989 – REVISED SEPTEMBER 1999
electrical characteristics at specified free-air temperature, VCC± = ±15 V, VIC = 0 (unless otherwise
noted)
PARAMETER
VIO
Input offset voltage
aV
Temperature coeficient
of input offset voltage
IO
TA†
TEST CONDITIONS
Input offset current
IIB
Input bias current
VICR
VOM
Maximum peak output
voltage swing
AVD
Large-signal
L
i
l diff
differential
ti l
voltage am
amplification
lification
CMRR
kSVR
Common-mode
rejection ratio
Supply-voltage
rejection ratio
(∆VCC/∆VIO)
Channel separation
MAX
60
300
Full range
0.4
25°C
0.5
25°C
0.15
Full range
–12
Full range
VO = ±10 V,
V
VO = ±10 V,
VIC = –15 V to 13.5 V
VIC = –15 V to 13 V
VCC± = ±2 V to ±18 V
VO = ±10 V,
200
–15
to
13.5
Full range
–15
to 13
25°C
±12.5
MAX
800
1000
2.5
0.7
5
1.5
0.15
–15.3
to
13.8
1.5
2.8
–30
–12
–30
–38
–15
to
13.5
UNIT
µV
µV/°C
µV/mo
0.5
–38
25°C
–15.3
to
13.8
nA
nA
V
–15
to 13
±14
±12.5
±14
Full range
±12
25°C
0.5
2
0.5
2
25°C
1.2
8
1.2
8
Full range
0.7
25°C
97
Full range
94
25°C
100
Full range
97
RL = 600 Ω
RL = 2 kΩ
TYP‡
2.8
25°C
RL = 2 kΩ
MIN
550
Full range
Common-mode
input voltage range
LT1014DC
TYP‡
25°C
RS = 50 Ω
Long-term drift
of input offset voltage
IIO
LT1014C
MIN
V
±12
V/µV
0.7
117
97
117
dB
94
117
100
117
dB
RL = 2 kΩ
97
25°C
120
137
120
137
dB
rid
Differential
input resistance
25°C
70
300
70
300
MΩ
ric
Common-mode
input resistance
25°C
4
4
GΩ
ICC
Supply
y current
per amplifier
25°C
0.35
Full range
0.55
0.6
0.35
0.55
0.6
mA
† Full range is 0°C to 70°C.
‡ All typical values are at TA = 25°C.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5
LT1014, LT1014A, LT1014D
QUAD PRECISION OPERATIONAL AMPLIFIERS
SLOS039C – JULY 1989 – REVISED SEPTEMBER 1999
electrical characteristics at specified free-air temperature, VCC± = 5 V, VCC– = 0, VO = 1.4 V, VIC = 0
(unless otherwise noted)
PARAMETER
VIO
Input offset voltage
IIO
Input offset current
IIB
Input bias current
VICR
Common-mode
input
in
ut voltage range
LT1014C
MIN
LT1014DC
TYP
MAX
90
450
25°C
RS = 50 Ω
Full range
0.2
25°C
–15
M i
t t
Maximum
peakk output
voltage swing
Output low,
Output high,
Output high,
g ,
RL = 600 Ω to GND
AVD
Large-signal differential
voltage amplification
ICC
Supplyy current
per amplifier
0
to 3.5
Full range
0 to 3
–0.3
to 3.8
950
2
6
–50
–15
–50
–90
0
to 3.5
–0.3
to 3.8
µV
nA
nA
V
25°C
15
25
15
25
25°C
5
10
5
10
13
25°C
UNIT
0 to 3
Full range
Isink = 1 mA
No load
0.2
–90
25°C
MAX
1200
6
Full range
Output low,,
RL = 600 Ω to GND
TYP
250
2
Full range
No load
MIN
570
25°C
Output low,
VOM
TA†
TEST CONDITIONS
220
13
350
220
mV
350
25°C
4
4.4
4
4.4
25°C
3.4
4
3.4
4
V
Full range
3.2
1
V/µV
VO = 5 mV to 4 V,
RL = 500 Ω
3.2
25°C
1
25°C
0.3
Full range
0.5
0.3
0.55
0.5
0.55
mA
† Full range is 0°C to 70°C.
operating characteristics, VCC± = ±15 V, VIC = 0, TA = 25°C
PARAMETER
SR
6
TEST CONDITIONS
Slew rate
MIN
TYP
0.2
0.4
f = 10 Hz
24
f = 1 kHz
22
MAX
UNIT
V/µs
Vn
Equivalent input noise voltage
VN(PP)
In
Peak-to-peak equivalent input noise voltage
f = 0.1 Hz to 10 Hz
0.55
µV
Equivalent input noise current
f = 10 Hz
0.07
pA/√Hz
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
nV/√Hz
LT1014, LT1014A, LT1014D
QUAD PRECISION OPERATIONAL AMPLIFIERS
SLOS039C – JULY 1989 – REVISED SEPTEMBER 1999
electrical characteristics at specified free-air temperature, VCC± = ±15 V, VIC = 0 (unless otherwise
noted)
PARAMETER
VIO
Input offset voltage
aV
Temperature coeficient
of input offset voltage
IO
TA†
TEST CONDITIONS
Input offset current
IIB
Input bias current
VICR
VOM
Maximum peak
output voltage swing
AVD
Large-signal
L
i
l diff
differential
ti l
voltage am
amplification
lification
CMRR
kSVR
Common-mode
rejection ratio
Supply-voltage
rejection ratio
(∆VCC/∆VIO)
Channel separation
MAX
60
300
Full range
0.4
25°C
0.5
25°C
0.15
Full range
–12
Full range
VO = ±10 V,
V
VO = ±10 V,
VIC = –15
15 V to 13
13.5
5V
VCC± = ±2 V to ±18 V
VO = ±10 V,
200
–15
to
13.5
Full range
–15
to 13
25°C
±12.5
MAX
800
1000
2.5
0.7
5
1.5
0.15
–15.3
to
13.8
1.5
2.8
–30
–12
–30
–38
–15
to
13.5
UNIT
µV
µV/°C
µV/mo
0.5
–38
25°C
–15.3
to
13.8
nA
nA
V
–15
to 13
±14
±12.5
±14
Full range
±12
25°C
0.5
2
0.5
2
25°C
1.2
8
1.2
8
Full range
0.7
25°C
97
Full range
94
25°C
100
Full range
97
RL = 600 Ω
RL = 2 kΩ
TYP‡
2.8
25°C
RL = 2 kΩ
MIN
550
Full range
Common-mode
input voltage range
LT1014DI
TYP‡
25°C
RS = 50 Ω
Long-term drift
of input offset voltage
IIO
LT1014I
MIN
V
±12
V/µV
0.7
117
97
117
dB
94
117
100
117
dB
RL = 2 kΩ
97
25°C
120
137
120
137
dB
rid
Differential
input resistance
25°C
70
300
70
300
MΩ
ric
Common-mode
input resistance
25°C
4
4
GΩ
ICC
Supply
y current
per amplifier
25°C
0.35
Full range
0.55
0.6
0.35
0.55
0.6
mA
† Full range is –40°C to 105°C.
‡ All typical values are at TA = 25°C.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
7
LT1014, LT1014A, LT1014D
QUAD PRECISION OPERATIONAL AMPLIFIERS
SLOS039C – JULY 1989 – REVISED SEPTEMBER 1999
electrical characteristics at specified free-air temperature, VCC+ = 5 V, VCC– = 0, VO = 1.4 V, VIC = 0
(unless otherwise noted)
PARAMETER
VIO
Input offset voltage
IIO
Input offset current
IIB
Input bias current
VICR
Common-mode
input
in
ut voltage range
LT1014I
MIN
LT1014DI
TYP
MAX
90
450
25°C
RS = 50 Ω
Full range
0.2
–15
Full range
M i
k
Maximum
peak
out
ut voltage swing
output
Output low,
Output high,
Output high,
g ,
RL = 600 Ω to GND
AVD
Large-signal differential
voltage amplification
ICC
Supplyy current
per amplifier
0
to 3.5
Full range
0 to 3
–0.3
to 3.8
950
2
6
–50
–15
–50
–90
0
to 3.5
–0.3
to 3.8
µV
nA
nA
V
25°C
15
25
15
25
25°C
5
10
5
10
13
25°C
UNIT
0 to 3
Full range
Isink = 1 mA
No load
0.2
–90
25°C
MAX
1200
6
25°C
Output low,,
RL = 600 Ω to GND
TYP
250
2
Full range
No load
MIN
570
25°C
Output low,
VOM
TA†
TEST CONDITIONS
220
13
350
220
mV
350
25°C
4
4.4
4
4.4
25°C
3.4
4
3.4
4
V
Full range
3.2
1
V/µV
VO = 5 mV to 4 V,
RL = 500 Ω
3.2
25°C
1
25°C
0.3
Full range
0.5
0.3
0.55
0.5
0.55
mA
† Full range is –40°C to 105°C.
operating characteristics, VCC+ = ±15 V, VIC = 0, TA = 25°C
PARAMETER
8
TEST CONDITIONS
MIN
TYP
0.2
0.4
MAX
UNIT
SR
Slew rate
Vn
Equivalent input noise voltage
VN(PP)
In
Peak-to-peak equivalent input noise voltage
f = 0.1 Hz to 10 Hz
0.55
µV
Equivalent input noise current
f = 10 Hz
0.07
pA/√Hz
POST OFFICE BOX 655303
f = 10 Hz
24
f = 1 kHz
22
• DALLAS, TEXAS 75265
V/µs
nV/√Hz
LT1014, LT1014A, LT1014D
QUAD PRECISION OPERATIONAL AMPLIFIERS
SLOS039C – JULY 1989 – REVISED SEPTEMBER 1999
electrical characteristics at specified free-air temperature, VCC± = ±15 V, VIC = 0 (unless otherwise
noted)
PARAMETER
VIO
aV
IO
Input offset
voltage
TEST
CONDITIONS
RS = 50 Ω
Temperature
coefficient of
input offset
voltage
Long-term drift
of input offset
voltage
IIO
Input offset
current
IIB
Input bias
current
VICR
Common-mode
input voltage
g
range
VOM
Maximum peak
output voltage
swing
AVD
Large-signal
differential
voltage
amplification
CMRR
kSVR
Common-mode
rejection ratio
TA†
MIN
LT1014M
TYP‡ MAX
25°C
60
Full range
Full range
0.5
25°C
0.5
25°C
0.15
–12
Full range
VO = ±10 V,,
RL = 2 kΩ
60
2.5
0.5
–15
to
13.5
Full range
–14.9
to 13
25°C
±12.5
Full range
±11.5
180
200
1.5
0.15
2
0.5
–12
–15.3
to
13.8
0.8
–12
–15.3
to
13.8
±13
1.5
–30
–45
–15
to
13.5
UNIT
µV
µV/°C
µV/mo
5
–20
–14.9
to 13
±14
0.15
–30
–15
to
13.5
2.5
0.5
2.8
–30
800
1000
0.5
–45
25°C
LT1014DM
TYP‡ MAX
MIN
350
5
25°C
VO = ±10 V,
RL = 600 Ω
300
550
Full range
RL = 2 kΩ
LT1014AM
TYP‡ MAX
MIN
–15.3
to
13.8
nA
nA
V
–14.9
to 13
±14
±12.5
±12
±14
V
±11.5
25°C
0.5
2
0.8
2.2
0.5
2
25°C
1.2
8
1.5
8
1.2
8
Full range
0.25
0.4
V/ V
V/µV
0.25
VIC = –15 V to
13.5 V
25°C
97
VIC = –14.9 V
to 13 V
Full range
94
25°C
100
Full range
97
25°C
120
137
123
137
120
137
dB
70
300
100
300
70
300
MΩ
4
GΩ
Supply-voltage
rejection ratio
(∆VCC/∆VIO)
VCC± = ±2 V to
±18 V
Channel
separation
VO = ±10 V,
RL = 2 kΩ
117
100
117
97
117
dB
96
117
103
94
117
100
117
dB
100
rid
Differential input
resistance
25°C
ric
Common-mode
input resistance
25°C
4
ICC
Supply
y current
per amplifier
25°C
0.35
Full range
97
4
0.55
0.7
0.35
0.50
0.6
0.35
0.55
0.7
mA
† Full range is –55°C to 125°C.
‡ All typical values are at TA = 25°C.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
9
LT1014, LT1014A, LT1014D
QUAD PRECISION OPERATIONAL AMPLIFIERS
SLOS039C – JULY 1989 – REVISED SEPTEMBER 1999
electrical characteristics at specified free-air temperature, VCC+ = 5 V, VCC– = 0, VO = 1.4 V, VIC = 0
(unless otherwise noted)
PARAMETER
VIO
Input
offset voltage
IIO
Input
offset current
IIB
Input
bias current
VICR
Commonmode input
voltage range
TEST
CONDITIONS
RS = 50Ω
TA†
AVD
Large-signal
differential
voltage
amplification
ICC
Supplyy current
per amplifier
LT1014AM
MAX
MIN
LT1014DM
TYP
MAX
MIN
TYP
MAX
25°C
90
450
90
280
250
950
400
1500
400
960
800
2000
125°C
200
750
200
480
560
1200
25°C
0.2
2
0.2
1.3
0.2
2
–15
–50
–15
–35
–15
–50
RS = 50Ω,
VIC = 0.1 V
Full range
10
25°C
Full range
25°C
Full range
Output low,
RL = 600Ω to
GND
Maximum
peak output
voltage swing
TYP
Full range
Output low,
No load
VOM
LT1014M
MIN
7
–120
0
to 3.5
10
–90
–0.3
to 3.8
0
to 3.5
0.1
to 3
–0.3
to 3.8
µV
nA
–120
0
to 3.5
0.1
to 3
UNIT
–0.3
to 3.8
V
0.1
to 3
25°C
15
25
15
25
15
25
25°C
5
10
5
10
5
10
mV
Full range
18
15
18
Output low,
Isink = 1 mA
25°C
Output high,
No load
25°C
4
4.4
4
4.4
4
4.4
Output high,
25°C
3.4
4
3.4
4
3.4
4
V
RL = 600Ω to
GND
Full range
3.1
1
V/µV
VO = 5 mV to 4 V,
RL = 500Ω
220
220
350
3.2
25°C
1
25°C
0.3
Full range
350
220
3.1
1
0.5
350
0.3
0.65
0.45
0.3
0.55
0.5
0.65
mA
† Full range is –55°C to 125°C.
operating characteristics, VCC± = ±15 V, VIC = 0, TA = 25°C
PARAMETER
SR
TEST CONDITIONS
Slew rate
MIN
TYP
0.2
0.4
f = 10 Hz
24
f = 1 kHz
22
MAX
UNIT
V/µs
Vn
Equivalent input noise voltage
VN(PP)
In
Peak-to-peak equivalent input noise voltage
f = 0.1 Hz to 10 Hz
0.55
µV
Equivalent input noise current
f = 10 Hz
0.07
pA/√Hz
10
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
nV/√Hz
LT1014, LT1014A, LT1014D
QUAD PRECISION OPERATIONAL AMPLIFIERS
SLOS039C – JULY 1989 – REVISED SEPTEMBER 1999
TYPICAL CHARACTERISTICS
Table of Graphs
FIGURE
VIO
VIO
Input offset voltage vs Balanced source resistance
1
Input offset voltage vs Free-air temperature
2
∆VIO
IIO
Warm-Up Change in input offset voltage vs Elapsed time
3
Input offset current vs Free-air temperature
4
IIB
VIC
Input bias current vs Free-air temperature
5
AVD
Common-mode input voltage vs Input bias current
Differential voltage amplification
6
vs Load resistance
7, 8
vs Frequency
9, 10
Channel separation vs Frequency
11
Output saturation voltage vs Free-air temperature
12
CMRR
Common-mode rejection ratio vs Frequency
13
kSVR
Supply-voltage rejection ratio vs Frequency
14
ICC
IOS
Supply current vs Free-air temperature
15
Short-circuit output current vs Elapsed time
16
Vn
In
Equivalent input noise voltage vs Frequency
17
Equivalent input noise current vs Frequency
17
VN(PP)
Peak-to-peak input noise voltage vs Time
18
Pulse response (small signal) vs Time
19, 21
Pulse response (large signal) vs Time
20, 22, 23
Phase shift vs Frequency
POST OFFICE BOX 655303
9
• DALLAS, TEXAS 75265
11
LT1014, LT1014A, LT1014D
QUAD PRECISION OPERATIONAL AMPLIFIERS
SLOS039C – JULY 1989 – REVISED SEPTEMBER 1999
TYPICAL CHARACTERISTICS†
INPUT OFFSET VOLTAGE
OF REPRESENTATIVE UNITS
vs
FREE-AIR TEMPERATURE
LT1014
INPUT OFFSET VOLTAGE
vs
BALANCED SOURCE RESISTANCE
250
10
1
VCC± = 5 V
VCC– = 0
0.1
RS
VCC± = ±15 V
0.01
1k
–
+
150
100
50
0
–50
–100
–150
–200
RS
3k
VCC± = ±15 V
200
VIO – Input Offset Voltage – µ V
VIO – Input Offset Voltage – mV
TA = 25°C
10 k 30 k 100 k 300 k 1 M
–250
–50
3 M 10 M
–25
0
Rs – Source Resistance – Ω
I IO – Input Offset Current – nA
∆V IO – Change in Input Offset Votlage – µ V
3
2
N Package
1
0.8
0.6
VCC± = ±2.5 V
0.4
VCC+ = 5 V, VCC– = 0
0.2
J Package
2
3
4
VCC± = ±15 V
5
0
–50
–25
0
25
50
75
100
TA – Free-Air Temperature – °C
t – Time After Power-On – min
Figure 3
Figure 4
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
12
125
VIC = 0
4
1
100
1
VCC± = ±15 V
TA = 25°C
0
75
INPUT OFFSET CURRENT
vs
FREE-AIR TEMPERATURE
WARM-UP CHANGE IN INPUT OFFSET VOLTAGE
vs
ELAPSED TIME
0
50
Figure 2
Figure 1
5
25
TA – Free-Air Temperature – °C
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
125
LT1014, LT1014A, LT1014D
QUAD PRECISION OPERATIONAL AMPLIFIERS
SLOS039C – JULY 1989 – REVISED SEPTEMBER 1999
TYPICAL CHARACTERISTICS†
COMMON-MODE INPUT VOLTAGE
vs
INPUT BIAS CURRENT
INPUT BIAS CURRENT
vs
FREE-AIR TEMPERATURE
–30
5
15
VIC = 0
I IB – Input Bias Current – nA
–25
–20
VCC
+ = 5 V, VCC– = 0
–15
VCC± = ±2.5 V
–10
VCC± = ±15 V
–5
0
–50
10
4
5
3
VCC± = ±15 V
(Left Scale)
1
–10
0
–15
–25
0
25
50
75
100
0
125
–5
–10
–25
–1
–30
VCC± = ±15 V
VO = ±10 V
TA = 25°C
TA = –55°C
1
TA = 125°C
0.4
1k
DIFFERENTIAL VOLTAGE AMPLIFICATION
vs
LOAD RESISTANCE
A VD – Differential Voltage Amplivication – V/µ V
10
400
–20
Figure 6
DIFFERENTIAL VOLTAGE AMPLIFICATION
vs
LOAD RESISTANCE
4
–15
IIB – Input Bias Current – nA
Figure 5
A VD – Differential Voltage Amplivication – V/µ V
2
–5
TA – Free-Air Temperature – °C
0.1
100
VCC+ = 5 V
VCC– = 0
(Right Scale)
0
VIC – Common-Mode Input Voltage – V
VIC – Common-Mode Input Voltage – V
TA = 25°C
4k
10 k
10
VCC+ = 5 V, VCC– = 0
VO = 20 mV to 3.5 V
4
TA = –55°C
1
TA = 25°C
TA = 125°C
0.4
0.1
100
RL – Load Resistance – Ω
400
1k
4k
10 k
RL – Load Resistance – Ω
Figure 7
Figure 8
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
13
LT1014, LT1014A, LT1014D
QUAD PRECISION OPERATIONAL AMPLIFIERS
SLOS039C – JULY 1989 – REVISED SEPTEMBER 1999
TYPICAL CHARACTERISTICS†
VCC± = ±15 V
140
80°
VIC = 0
CL = 100 pF
TA = 25°C
100°
120°
AVD
VCC+ = 5 V
VCC– = 0
10
140°
160°
VCC+ = 5 V
VCC– = 0
0
180°
200°
VCC± = ±15 V
220°
–10
0.01
0.3
1
A VD – Differential Voltage Amplivication – dB
20
DIFFERENTIAL VOLTAGE AMPLIFICATION
vs
FREQUENCY
φ – Phase Shift
A VD – Differential Voltage Amplivication – dB
DIFFERENTIAL VOLTAGE AMPLIFICATION
AND PHASE SHIFT
vs
FREQUENCY
120
100
80
VCC + = 5 V
VCC – = 0
40
20
0
1
10
Figure 9
OUTPUT SATURATION VOLTAGE
vs
FREE-AIR TEMPERATURE
Limited by
Thermal
Interaction
VCC+ = 5 V to 30 V
VCC– = 0
Output Saturation Voltage – V
Channel Separation – dB
10
VCC± = ±15 V
VI(PP) = 20 V to 5 kHz
RL = 2 kΩ
TA = 25°C
120
RL = 100 Ω
RL = 1 kΩ
100
Limited by
Pin-to-Pin
Capacitance
80
1 k 10 k 100 k 1 M 10 M
Figure 10
CHANNEL SEPARATION
vs
FREQUENCY
140
100
f – Frequency – Hz
f – Frequency – MHz
160
VCC± = ±15 V
60
–20
0.01 0.1
240°
10
3
CL = 100 pF
TA = 25°C
Isink = 10 mA
1
Isink = 5 mA
Isink = 1 mA
0.1
Isink = 100 µA
Isink = 10 µA
Isink = 0
60
10
100
1k
10 k
100 k
1M
0.01
–50
–25
0
25
50
75
100
TA – Free-Air Temperature – °C
f – Frequency – Hz
Figure 11
Figure 12
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
14
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
125
LT1014, LT1014A, LT1014D
QUAD PRECISION OPERATIONAL AMPLIFIERS
SLOS039C – JULY 1989 – REVISED SEPTEMBER 1999
TYPICAL CHARACTERISTICS†
SUPPLY-VOLTAGE REJECTION RATIO
vs
FREQUENCY
COMMON-MODE REJECTION RATIO
vs
FREQUENCY
140
TA = 25°C
K SVR – Supply-Voltage Rejection Ratio – dB
CMRR – Common-Mode Rejection Ratio – dB
120
100
VCC± = ±15 V
VCC+ = 5 V
VCC– = 0
80
60
40
20
0
10
100
1k
100 k
10 k
120
100
Positive
Supply
Negative
Supply
80
60
40
20
0
0.1
1M
VCC± = ± 15 V
TA = 25°C
1
f – Frequency – Hz
I OS – Short-Circuit Output Current – mA
I CC – Supply Current Per Amplifier –µ A
40
420
380
VCC± = ±15 V
340
VCC+ = 5 V
VCC– = 0
0
25
10 k
100 k
1M
SHORT-CIRCUIT OUTPUT CURRENT
vs
ELAPSED TIME
460
–25
1k
Figure 14
SUPPLY CURRENT
vs
FREE-AIR TEMPERATURE
260
–50
100
f – Frequency – Hz
Figure 13
300
10
50
75
100
125
VCC± = ±15 V
TA = –55°C
30
TA = 25°C
20
TA = 125°C
10
0
–10
–20
–30
–40
0
TA – Free-Air Temperature – °C
TA = 125°C
TA = 25°C
TA = –55°C
1
2
3
t – Time – min
Figure 15
Figure 16
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
15
LT1014, LT1014A, LT1014D
QUAD PRECISION OPERATIONAL AMPLIFIERS
SLOS039C – JULY 1989 – REVISED SEPTEMBER 1999
TYPICAL CHARACTERISTICS
PEAK-TO-PEAK INPUT NOISE VOLTAGE
OVER A 10-SECOND PERIOD
vs
TIME
1000
300
300
In
100
100
Vn
30
30
1/f Corner = 2 Hz
10
1
VCC± = ±2 V to ±18 V
f = 0.1 Hz to 10 Hz
TA = 25°C
1600
1200
800
400
0
10
1k
100
10
2000
V N(PP) – Noise Voltage – nV
VCC± = ±2 V to ±18 V
TA = 25°C
I n – Equivalent Input Noise Current –fA/ Hz
Vn – Equivalent Input Noise Voltage – fA/ Hz
1000
EQUIVALENT INPUT NOISE VOLTAGE
AND EQUIVALENT INPUT NOISE CURRENT
vs
FREQUENCY
0
2
4
VOLTAGE-FOLLOWER LARGE-SIGNAL
PULSE RESPONSE
vs
TIME
VOLTAGE-FOLLOWER SMALL-SIGNAL
PULSE RESPONSE
vs
TIME
6
VCC± = ±15 V
AV = 1
TA = 25°C
5
40
V O – Output Voltage – V
V O – Output Voltage – mV
60
20
0
–20
4
2
1
0
–60
–1
–80
2
4
6
8
10
12
14
VCC+ = 5 V
VCC– = 0
VI = 0 to 4 V
RL = 0
AV = 1
TA = 25°C
3
–40
0
–2
t – Time – µs
0
10
20
30
t – Time – µs
Figure 19
16
10
Figure 18
Figure 17
80
8
6
t – Time – s
f – Frequency – Hz
Figure 20
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
40
50
60
70
LT1014, LT1014A, LT1014D
QUAD PRECISION OPERATIONAL AMPLIFIERS
SLOS039C – JULY 1989 – REVISED SEPTEMBER 1999
TYPICAL CHARACTERISTICS
VOLTAGE-FOLLOWER SMALL-SIGNAL
PULSE RESPONSE
vs
TIME
160
6
VCC+ = 5 V
VCC– = 0
VI = 0 to 100 mV
RL = 600 Ω to GND
AV = 1
TA = 25°C
120
100
5
4
V O – Output Voltage – mV
140
80
60
40
2
1
0
0
–1
–20
0
20
40
60
80
VCC+ = 5 V
VCC– = 0
VI = 0 to 4 V
RL = 4.7 kΩ to 5 V
AV = 1
TA = 25°C
3
20
–2
100 120 140
10 20 30 40
t – Time – µs
0
t – Time – µs
Figure 21
50
60
70
Figure 22
VOLTAGE-FOLLOWER LARGE-SIGNAL
PULSE RESPONSE
vs
TIME
6
5
V O – Output Voltage – V
V O – Output Voltage – mV
VOLTAGE-FOLLOWER LARGE-SIGNAL
PULSE RESPONSE
vs
TIME
4
VCC+ = 5 V
VCC– = 0
VI = 0 to 4 V
RL = 0
AV = 1
TA = 25°C
3
2
1
0
–1
–2
0
10
20
30
40
50
60
70
t – Time – µs
Figure 23
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
17
LT1014, LT1014A, LT1014D
QUAD PRECISION OPERATIONAL AMPLIFIERS
SLOS039C – JULY 1989 – REVISED SEPTEMBER 1999
APPLICATION INFORMATION
single-supply operation
The LT1014 is fully specified for single-supply operation (VCC– = 0). The common-mode input voltage range
includes ground, and the output swings within a few millivolts of ground.
Furthermore, the LT1014 has specific circuitry that addresses the difficulties of single-supply operation, both
at the input and at the output. At the input, the driving signal can fall below 0 V, either inadvertently or on a
transient basis. If the input is more than a few hundred millivolts below ground, the LT1014 is designed to deal
with the following two problems that can occur:
1. On many other operational amplifiers, when the input is more than a diode drop below ground, unlimited
current flows from the substrate (VCC– terminal) to the input, which can destroy the unit. On the LT1014,
the 400-Ω resistors in series with the input (see schematic) protect the device even when the input is 5 V
below ground.
2. When the input is more than 400 mV below ground (at TA = 25°C), the input stage of similar type operational
amplifiers saturates, and phase reversal occurs at the output. This can cause lockup in servo systems.
Because of unique phase-reversal protection circuitry (Q21, Q22, Q27, and Q28), the LT1014 outputs do
not reverse, even when the inputs are at –1.5 V (see Figure 24).
However, this phase-reversal protection circuitry does not function when the other operational amplifier on the
LT1014 is driven hard into negative saturation at the output. Phase-reversal protection does not work on an
amplifier:
D
D
D
D
When 4’s output is in negative saturation (the outputs of 2 and 3 have no effect)
When 3’s output is in negative saturation (the outputs of 1 and 4 have no effect)
When 2’s output is in negative saturation (the outputs of 1 and 4 have no effect)
When 1’s output is in negative saturation (the outputs of 2 and 3 have no effect)
At the output, other single-supply designs either cannot swing to within 600 mV of ground or cannot sink more
than a few microproamperes while swinging to ground. The all-npn output stage of the LT1014 maintains its low
output resistance and high gain characteristics until the output is saturated. In dual-supply operations, the output
stage is free of crossover distortion.
4
3
2
1
0
–1
–2
5
V O – Output Voltage – V
5
V O – Output Voltage – V
V I(PP) – Input Voltage – V
5
4
3
2
1
0
–1
(a) VI(PP) = –1.5 V to 4.5 V
4
3
2
1
0
–1
(b) Output Phase Reversal
Exhibited by LM358
(c) No Phase Reversal
Exhibited by LT1014
Figure 24. Voltage-Follower Response
With Input Exceeding the Negative Common-Mode Input Voltage Range
18
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
LT1014, LT1014A, LT1014D
QUAD PRECISION OPERATIONAL AMPLIFIERS
SLOS039C – JULY 1989 – REVISED SEPTEMBER 1999
APPLICATION INFORMATION
comparator applications
The single-supply operation of the LT1014 can be used as a precision comparator with TTL-compatible output.
In systems using both operational amplifiers and comparators, the LT1014 can perform multiple duties (see
Figures 25 and 26).
5
4
10 mV
5 mV
2 mV
3
2
Overdrive
1
V O – Output Voltage – V
V O – Output Voltage – V
5
VCC+ = 5 V
VCC– = 0
TA = 25°C
4
3
2
10 mV
5 mV
2 mV
1
Overdrive
0
100 mV
0
VCC+ = 5 V
VCC– = 0
TA = 25°C
50 100 150 200 250 300 350 400 450
Differential
Input Voltage
Differential
Input Voltage
0
100 mV
0
50 100 150 200 250 300 350 400 450
t – Time – µs
t – Time – µs
Figure 25. Low-to-High-Level Output Response
for Various Input Overdrives
Figure 26. High-to-Low-Level Output Response
for Various Input Overdrives
low-supply operation
The minimum supply voltage for proper operation of the LT1014 is 3.4 V (three Ni-Cad batteries). Typical supply
current at this voltage is 290 µA; therefore, power dissipation is only 1 mW per amplifier.
offset voltage and noise testing
Figure 30 shows the test circuit for measuring input offset voltage and its temperature coefficient. This circuit
with supply voltages increased to ±20 V is also used as the burn-in configuration.
The peak-to-peak equivalent input noise voltage of the LT1014 is measured using the test circuit shown in
Figure 27. The frequency response of the noise tester indicates that the 0.1-Hz corner is defined by only one
zero. The test time to measure 0.1-Hz to 10-Hz noise should not exceed 10 seconds, as this time limit acts as
an additional zero to eliminate noise contribution from the frequency band below 0.1 Hz.
An input noise-voltage test is recommended when measuring the noise of a large number of units. A 10-Hz input
noise-voltage measurement correlates well with a 0.1-Hz peak-to-peak noise reading because both results are
determined by the white noise and the location of the 1/f corner frequency.
Noise current is measured by the circuit and formula shown in Figure 28. The noise of the source resistors is
subtracted.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
19
LT1014, LT1014A, LT1014D
QUAD PRECISION OPERATIONAL AMPLIFIERS
SLOS039C – JULY 1989 – REVISED SEPTEMBER 1999
APPLICATION INFORMATION
0.1 µF
100 kΩ
10 Ω
+
2 kΩ
+
LT1014
4.7 µF
–
4.3 kΩ
22 µF
Oscilloscope
Rin = 1 MΩ
LT1001
2.2 µF
–
AVD = 50,000
100 kΩ
110 kΩ
24.3 kΩ
0.1 µF
NOTE A: All capacitor values are for nonpolarized capacitors only.
Figure 27. 0.1-Hz to 10-Hz Peak-to-Peak Noise Test Circuit
10 kΩ
10 Mن 10 Mن
+
100 Ω
10 Mن 10 Mن
ƪ
+
V
Vn
LT1014
In
–
no 2
* (820 nV)
40 MW
† Metal-film resistor
Figure 28. Noise-Current Test Circuit and Formula
50 Ω
(see Note A)
15 V
100 Ω
(see Note A)
+
LT1014
VO = 1000 VIO
–
50 Ω
(see Note A)
–15 V
NOTE A: Resistors must have low thermoelectric potential.
Figure 29. Test Circuit for VIO and αVIO
20
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
2
100
ƫń
1 2
LT1014, LT1014A, LT1014D
QUAD PRECISION OPERATIONAL AMPLIFIERS
SLOS039C – JULY 1989 – REVISED SEPTEMBER 1999
APPLICATION INFORMATION
5V
Q3
2N2905
820 Ω
Q1
2N2905
T1‡
10 µF
+
68 Ω
1N4002 (4)
10 µF
+
SN74HC04 (6)
0.002 µF
10 kΩ
10 kΩ
0.33 µF
Q4
2N2222
820 Ω
Q2
2N2905
10 kΩ
100 kΩ
5V
10 Ω†
±
2 kΩ
1/4
LT1014
+
100 pF
5V
10 kن
20-mA
Trim
4 kن
10 kن
1 kΩ
4-mA
Trim
4.3 kΩ
80 Ω†
±
1/4
LT1014
+
100 Ω†
4-mA to 20-mA OUT
To Load
2.2 kΩ Max
LT1004
1.2 V
IN
0 to 4 V
† 1% film resistor. Match 10-kΩ resistors 0.05%.
‡ T1 = PICO-31080
Figure 30. 5-V Powered, 4-mA to 20-mA Current-Loop Transmitter With 12-Bit Accuracy
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
21
LT1014, LT1014A, LT1014D
QUAD PRECISION OPERATIONAL AMPLIFIERS
SLOS039C – JULY 1989 – REVISED SEPTEMBER 1999
APPLICATION INFORMATION
0.1 Ω
5V
100 kΩ
–
To
Inverter
Driver
1/4
LT1014
+
1N4002 (4)
T1
10 µF
+
+
1/4
LT1014
–
68 kن
4-mA to 20-mA OUT
Fully Floating
10 kن
301 Ω†
4 kن
4.3 kΩ
5V
1 kΩ
20-mA
Trim
2 kΩ
4-mA
Trim
LT1004
1.2 V
IN
0 to 4 V
† 1% film resistor
Figure 31. Fully Floating Modification to 4-mA to 20-mA Current-Loop Transmitter With 8-Bit Accuracy
5V
1/2 LTC1043
IN+
5
6
2
5
6
3
IN–
18
8
1/4
LT1014
1 µF
1 µF
+
–
15
7
4
OUT A
R2
R1
1/2 LTC1043
IN+
8
7
11
IN–
+
1/4
LT1014
1 µF
1 µF
12
13
3
2
–
14
0.01 µF
1
OUT B
R2
R1
NOTE A: VIO = 150 µV, AVD = (R1/R2) + 1, CMRR = 120 dB, VICR = 0 to 5 V
Figure 32. 5-V Single-Supply Dual Instrumentation Amplifier
22
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
LT1014, LT1014A, LT1014D
QUAD PRECISION OPERATIONAL AMPLIFIERS
SLOS039C – JULY 1989 – REVISED SEPTEMBER 1999
APPLICATION INFORMATION
10
200 kن
2
LT1014
20 kΩ
3
–
10 kن
1
10 kن
+
10 kΩ
‡
5V
13
RG (2 kΩ Typ)
12
1 µF
‡
20 kΩ
5
IN+
–
4
14
200 kΩ
6
To Input
Cable Shields
–
‡
IN–
8
LT1014
9
5V
+
LT1014
+
10 kΩ
OUT
11
–
LT1014
7
+
10 kن
10 kن
‡
5V
† † 1% film resistor. Match 10-kΩ resistors 0.05%.
‡ For high source impedances, use 2N2222 as diodes (with collector connected to base).
NOTE A: AVD = (400,000/RG) + 1
Figure 33. 5-V Powered Precision Instrumentation Amplifier
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
23
PACKAGE OPTION ADDENDUM
www.ti.com
6-Jun-2005
PACKAGING INFORMATION
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
5962-89677012A
ACTIVE
LCCC
FK
20
1
TBD
5962-8967701CA
ACTIVE
CDIP
J
14
1
TBD
5962-89677022A
ACTIVE
LCCC
FK
20
1
TBD
5962-8967702CA
ACTIVE
CDIP
J
14
1
TBD
LT1014AMFKB
ACTIVE
LCCC
FK
20
1
TBD
Lead/Ball Finish
MSL Peak Temp (3)
POST-PLATE Level-NC-NC-NC
A42 SNPB
Level-NC-NC-NC
POST-PLATE Level-NC-NC-NC
A42 SNPB
Level-NC-NC-NC
POST-PLATE Level-NC-NC-NC
LT1014AMJ
ACTIVE
CDIP
J
14
1
TBD
A42 SNPB
Level-NC-NC-NC
LT1014AMJB
ACTIVE
CDIP
J
14
1
TBD
A42 SNPB
Level-NC-NC-NC
LT1014CN
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
Level-NC-NC-NC
LT1014CNE4
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
Level-NC-NC-NC
LT1014DDW
ACTIVE
SOIC
DW
16
40
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LT1014DDWE4
ACTIVE
SOIC
DW
16
40
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LT1014DDWR
ACTIVE
SOIC
DW
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LT1014DDWRE4
ACTIVE
SOIC
DW
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LT1014DIDW
ACTIVE
SOIC
DW
16
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LT1014DIDWR
OBSOLETE
SOIC
DW
16
TBD
Call TI
LT1014DIN
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
Level-NC-NC-NC
LT1014DINE4
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
Level-NC-NC-NC
LT1014DMDW
ACTIVE
SOIC
DW
16
40
TBD
CU NIPDAU
Level-1-220C-UNLIM
LT1014DN
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
Level-NC-NC-NC
LT1014DNE4
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
Level-NC-NC-NC
LT1014IN
OBSOLETE
PDIP
N
14
TBD
Call TI
LT1014MFKB
ACTIVE
LCCC
FK
20
1
TBD
LT1014MJ
ACTIVE
CDIP
J
14
1
TBD
A42 SNPB
Level-NC-NC-NC
LT1014MJB
ACTIVE
CDIP
J
14
1
TBD
A42 SNPB
Level-NC-NC-NC
40
Call TI
Call TI
POST-PLATE Level-NC-NC-NC
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS) or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
6-Jun-2005
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 2
MECHANICAL DATA
MLCC006B – OCTOBER 1996
FK (S-CQCC-N**)
LEADLESS CERAMIC CHIP CARRIER
28 TERMINAL SHOWN
18
17
16
15
14
13
NO. OF
TERMINALS
**
12
19
11
20
10
A
B
MIN
MAX
MIN
MAX
20
0.342
(8,69)
0.358
(9,09)
0.307
(7,80)
0.358
(9,09)
28
0.442
(11,23)
0.458
(11,63)
0.406
(10,31)
0.458
(11,63)
21
9
22
8
44
0.640
(16,26)
0.660
(16,76)
0.495
(12,58)
0.560
(14,22)
23
7
52
0.739
(18,78)
0.761
(19,32)
0.495
(12,58)
0.560
(14,22)
24
6
68
0.938
(23,83)
0.962
(24,43)
0.850
(21,6)
0.858
(21,8)
84
1.141
(28,99)
1.165
(29,59)
1.047
(26,6)
1.063
(27,0)
B SQ
A SQ
25
5
26
27
28
1
2
3
4
0.080 (2,03)
0.064 (1,63)
0.020 (0,51)
0.010 (0,25)
0.020 (0,51)
0.010 (0,25)
0.055 (1,40)
0.045 (1,14)
0.045 (1,14)
0.035 (0,89)
0.045 (1,14)
0.035 (0,89)
0.028 (0,71)
0.022 (0,54)
0.050 (1,27)
4040140 / D 10/96
NOTES: A.
B.
C.
D.
E.
All linear dimensions are in inches (millimeters).
This drawing is subject to change without notice.
This package can be hermetically sealed with a metal lid.
The terminals are gold plated.
Falls within JEDEC MS-004
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TI’s terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding third-party products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Following are URLs where you can obtain information on other Texas Instruments products and application
solutions:
Products
Applications
Amplifiers
amplifier.ti.com
Audio
www.ti.com/audio
Data Converters
dataconverter.ti.com
Automotive
www.ti.com/automotive
DSP
dsp.ti.com
Broadband
www.ti.com/broadband
Interface
interface.ti.com
Digital Control
www.ti.com/digitalcontrol
Logic
logic.ti.com
Military
www.ti.com/military
Power Mgmt
power.ti.com
Optical Networking
www.ti.com/opticalnetwork
Microcontrollers
microcontroller.ti.com
Security
www.ti.com/security
Telephony
www.ti.com/telephony
Video & Imaging
www.ti.com/video
Wireless
www.ti.com/wireless
Mailing Address:
Texas Instruments
Post Office Box 655303 Dallas, Texas 75265
Copyright  2005, Texas Instruments Incorporated
Similar pages