GBU6A – GBU6K W TE PO WE R SEM IC O ND U C TO RS 6.0A GLASS PASSIVATED BRIDGE RECTIFIER Features ! Glass Passivated Die Construction A ! ! ! ! Low Forward Voltage Drop High Current Capability High Reliability High Surge Current Capability Ideal for Printed Circuit Boards D ! GBU Dim Min Max A 21.80 22.30 B 18.30 18.80 C 7.40 7.90 D 3.50 4.10 E 1.52 2.03 G 2.16 2.54 H 4.83 5.33 J 1.65 2.16 K 1.65 2.03 L 0.76 1.02 M 3.30 3.56 N 17.50 18.00 P 0.46 0.56 All Dimensions in mm J C + ~ ~ - E G K Mechanical Data ! ! ! ! ! ! H Case: Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: As Marked on Body Weight: 4.0 grams (approx.) Mounting Position: Any Marking: Type Number M B L N P Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @TC = 100°C Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) I2t Rating for Fusing (t < 8.35ms) Symbol GBU6A GBU6B GBU6D GBU6G GBU6J GBU6K Unit VRRM VRWM VR 50 100 200 400 600 800 V VR(RMS) 35 70 140 280 420 560 V IO 6.0 A IFSM 175 A I2t 127 A2s Forward Voltage (per element) @IF = 6.0A VFM 1.0 V Peak Reverse Current At Rated DC Blocking Voltage @TA = 25°C @TC = 100°C IR 5.0 500 µA Typical Thermal Resistance (per leg) (Note 1) RJA 8.6 K/W Typical Thermal Resistance (per leg) (Note 2) RJC 3.1 K/W Tj, TSTG -55 to +150 °C Operating and Storage Temperature Range Note: 1. Thermal resistance junction to ambient, mounted on PCB at 9.5mm lead length with 12mm2 copper pads. 2. Thermal resistance junction to case, mounted on 6.5 x 3.5 x 0.15cm thick AL plate. GBU6A – GBU6K 1 of 3 © 2002 Won-Top Electronics IF, INSTANTANEOUS FORWARD CURRENT (A) IO, AVERAGE RECTIFIED CURRENT (A) 6 With heatsink 5 4 3 2 1 Resistive or Inductive load 0 0 25 50 75 100 125 100 Tj = 25°C 10 1.0 Pulse width = 300µs 0.1 150 0.0 0.6 1.0 1.4 1.8 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics, per element 180 100 Single half-sine-wave (JEDEC method) Tj = 25°C f = 1.0MHz 160 Tj = 25°C Cj, JUNCTION CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) TC, CASE TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve 0.2 120 80 40 0 10 1 1 10 100 1 GBU6A – GBU6K 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance NUMBER OF CYCLES AT 60 Hz Fig. 3 Maximum Non-Repetitive Surge Current 2 of 3 © 2002 Won-Top Electronics ORDERING INFORMATION Product No. Package Type Shipping Quantity GBU6A SIL Bridge 25 Units/Tube GBU6B SIL Bridge 25 Units/Tube GBU6D SIL Bridge 25 Units/Tube GBU6G SIL Bridge 25 Units/Tube GBU6J SIL Bridge 25 Units/Tube GBU6K SIL Bridge 25 Units/Tube Shipping quantity given is for minimum packing quantity only. For minimum order quantity, please consult the Sales Department. Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein without further notice. WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life support devices or systems without the express written approval. Won-Top Electronics Co., Ltd. No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan Phone: 886-7-822-5408 or 886-7-822-5410 Fax: 886-7-822-5417 Email: [email protected] Internet: http://www.wontop.com GBU6A – GBU6K We power your everyday. 3 of 3 © 2002 Won-Top Electronics