Rhombus FSDM-1000 Fsdm series fast / ttl buffered single output delay line Datasheet

FSDM Series FAST / TTL Buffered Single Output Delay Lines
Electrical Specifications at 25OC
14 Pin DIL TTL Buffered
Delay
Triple Independent Delays
Tolerance
Commercial
MIL-Grade
(ns)
Part Number
Part Number
FSDM-5
FSDM3-5M
5 ± 1.00
FSDM-6
FSDM3-6M
6 ± 1.00
FSDM-7
FSDM3-7M
7 ± 1.00
FSDM-8
FSDM3-8M
8 ± 1.00
FSDM-9
FSDM3-9M
9 ± 1.00
FSDM-10
FSDM3-10M
10 ± 1.50
FSDM-15
FSDM3-15M
15 ± 2.00
FSDM-20
FSDM3-20M
20 ± 2.00
FSDM-25
FSDM3-25M
25 ± 2.00
FSDM-30
FSDM3-30M
30 ± 2.00
FSDM-35
FSDM3-35M
35 ± 2.00
FSDM-40
FSDM3-40M
40 ± 2.00
FSDM-50
FSDM3-50M
50 ± 2.50
FSDM-60
FSDM3-60M
60 ± 3.00
FSDM-70
FSDM3-70M
70 ± 3.50
FSDM-75
FSDM3-75M
75 ± 3.75
FSDM-80
FSDM3-80M
80 ± 4.00
FSDM-100
FSDM3-100M
100 ± 5.0
FSDM-125
FSDM3-125M
125 ± 6.25
FSDM-250
FSDM3-250M
250 ± 12.5
FSDM-500
FSDM3-500M
500 ± 25.0
FSDM-1000
FSDM3-1000
1000 ± 50.0
14-Pin Package Commercial
and Mil-Grade Versions
FAST/TTL Logic Buffered
Operating Temperature Ranges
0OC to +70OC, or -55OC to +125OC
8-pin DIP/SMD Versions: FAMDL Series
14-pin DIP/SMD Versions: FAIDL Series
FSDM 14-Pin Schematic
Vcc
OUT
14
8
1
7
IN
GND
TEST CONDITIONS -- FAST / TTL
VCC Supply Voltage ................................................ 5.00VDC
Input Pulse Voltage ................................................... 3.20V
Input Pulse Rise Time ....................................... 3.0 ns max.
Input Pulse Width / Period ........................... 1000 / 2000 ns
1. Measurements made at 25OC
2. Delay Times measured at 1.50V level of leading edge.
3. Rise Times measured from 0.75V to 2.40V.
4. 10pf probe and fixture load on output under test.
Dimensions in Inches (mm)
Commercial Grade 14-Pin Package with Unused Leads Removed
as per Schematic. (For Mil-Grade FSDM3 the Height is 0.335")
OPERATING SPECIFICATIONS
VCC Supply Voltage ................................... 5.00 ± 0.25 VDC
ICC Supply Current ......................... 25 mA typ, 48 mA max.
Logic “1” Input: VIH ........................ 2.00 V min., 5.50 V max.
IIH ............................... 20 µA max. @ 2.70V
Logic “0” Input: VIL .......................................... 0.80 V max.
IIL ............................................ -0.6 mA mA
VOH Logic “1” Voltage Out .................................. 2.40 V min.
VOL Logic “0” Voltage Out ............................... 0.50 V max.
PWI Input Pulse Width ............................. 40% of Delay min.
Operating Temperature Range ............................ 0O to 70OC
Storage Temperature Range ...................... -65O to +150OC
P/N Description
.245 .275
(6.22) (6.99)
TYP. MAX.
.120
(3.05)
MIN.
.050
(1.27)
TYP.
.600
(15.24)
TYP.
.020
(0.51)
TYP.
.010
(0.25)
TYP.
.300
(7.62)
FSDM - XXX X
MIL-GRADE: FSDM3 Military Grade delay lines use integrated circuits screened to MIL-STD-883B with an operating
temperature range of -55 to +125OC. These devices have a
package height of .335"
Buffered Triple Delays:
14-pin Com'l: FSDM
14-pin MIL: FSDM3
Total Delay in nanoseconds (ns)
Temp. Range Blank = Commercial
M = Mil-Grade
Examples: FSDM-25
= 25ns Delay
74F, 14-Pin Thru-hole
FSDM3-50M = 50ns Delay
74F, 14-Pin, Mil-Grade
Specifications subject to change without notice.
Rhombus
Industries Inc.
.400
(10.16)
MAX.
.810
(20.57)
MAX.
Auto-Insertable DIP and Surface Mount Versions:
Refer to FAIDL Series, same 14-pin footprint.
For space saving, refer to FAMDL 8-pin Series
For other values & Custom Designs, contact factory.
FSDM 9901
15801 Chemical Lane, Huntington Beach, CA 92649-1595
Phone: (714) 898-0960 • FAX: (714) 896-0971
www.rhombus-ind.com • email: [email protected]
Similar pages