ATMEL ATF1508ASVL-20JC84 Highperformance ee pld Datasheet

Features
• High-density, High-performance, Electrically-erasable
•
•
•
•
•
•
•
•
•
•
Complex Programmable Logic Device
– 3.0V to 3.6V Operating Range
– 128 Macrocells
– 5 Product Terms per Macrocell, Expandable up to 40 per Macrocell
– 84, 100, 160 Pins
– 15 ns Maximum Pin-to-pin Delay
– Registered Operation up to 77 MHz
– Enhanced Routing Resources
Flexible Logic Macrocell
– D/T/Latch Configurable Flip-flops
– Global and Individual Register Control Signals
– Global and Individual Output Enable
– Programmable Output Slew Rate
– Programmable Output Open Collector Option
– Maximum Logic Utilization by Burying a Register within a COM Output
Advanced Power Management Features
– Automatic 5 µA Standby for “L” Version
– Pin-controlled 100 µA Standby Mode
– Programmable Pin-keeper Inputs and I/Os
– Reduced-power Feature per Macrocell
Available in Commercial and Industrial Temperature Ranges
Available in 84-lead PLCC and 100-lead PQFP and TQFP and
160-lead PQFP Packages
Advanced EE Technology
– 100% Tested
– Completely Reprogrammable
– 10,000 Program/Erase Cycles
– 20 Year Data Retention
– 2000V ESD Protection
– 200 mA Latch-up Immunity
JTAG Boundary-scan Testing to IEEE Std. 1149.1-1990 and 1149.1a-1993 Supported
Fast In-System Programmability (ISP) via JTAG
PCI-compliant
Security Fuse Feature
Green (Pb/Halide-free/RoHS Compliant) Package Options
Highperformance
EE PLD
ATF1508ASV
ATF1508ASVL
Enhanced Features
•
•
•
•
•
•
•
•
•
•
•
Improved Connectivity (Additional Feedback Routing, Alternate Input Routing)
Output Enable Product Terms
Transparent-latch Mode
Combinatorial Output with Registered Feedback within Any Macrocell
Three Global Clock Pins
ITD (Input Transition Detection) Circuits on Global Clocks, Inputs and I/O
Fast Registered Input from Product Term
Programmable “Pin-keeper” Option
VCC Power-up Reset Option
Pull-up Option on JTAG Pins TMS and TDI
Advanced Power Management Features
– Edge-controlled Power-down “L”
– Individual Macrocell Power Option
– Disable ITD on Global Clocks, Inputs and I/O for “Z” Parts
Rev. 1408H–PLD–7/05
1
100-lead PQFP
Top View
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
74
73
72
71
70
69
68
67
66
65
64
63
62
61
60
59
58
57
56
55
54
100
99
98
97
96
95
94
93
92
91
90
89
88
87
86
85
84
83
82
81
I/O
I/O
GND
I/O/TDO
I/O
I/O
I/O
I/O
VCCIO
I/O
I/O
I/O
I/O/TCK
I/O
I/O
GND
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O/PD1
I/O
VCCIO
I/O/TDI
I/O
I/O
I/O
I/O
I/O
I/O
GND
I/O
I/O
I/O
I/O/TMS
I/O
I/O
VCCIO
I/O
I/O
I/O
I/O
I/O
I/O
I/O
GND
I/O
I/O
80
79
78
77
76
75
74
73
72
71
70
69
68
67
66
65
64
63
62
61
60
59
58
57
56
55
54
53
52
51
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
I/O
I/O
I/O
I/O
GND
I/O/TDO
I/O
I/O
I/O
I/O
I/O
I/O
VCCIO
I/O
I/O
I/O
I/O/TCK
I/O
I/O
GND
I/O
I/O
I/O
I/O
I/O
I/O
I/O
VCCIO
I/O
I/O
I/O
I/O
I/O
I/O
I/O
VCCIO
I/O
I/O
I/O
GND
VCCINT
I/O
I/O/PD2
I/O
GND
I/O
I/O
I/O
I/O
I/O
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
I/O
I/O
I/O
I/O
I/O
VCCIO
I/O
I/O
I/O
GND
VCCINT
I/O
I/O/PD2
I/O
GND
I/O
I/O
I/O
I/O
I/O
VCCIO
I/O/PD1
VCCIO
I/O/TDI
I/O
I/O
I/O
I/O
GND
I/O
I/O
I/O
I/O/TMS
I/O
I/O
VCCIO
I/O
I/O
I/O
I/O
I/O
GND
11
10
9
8
7
6
5
4
3
2
1
84
83
82
81
80
79
78
77
76
75
I/O
I/O
I/O
I/O
GND
I/O
I/O
I/O
VCCINT
INPUT/OE2/GCLK2
INPUT/GCLR
INPUT/OE1
INPUT/GCLK1
GND
I/O/GCLK3
I/O
I/O
VCCIO
I/O
I/O
I/O
I/O
I/O
I/O
GND
I/O
I/O
I/O
VCCINT
INPUT/OE2/GCLK2
INPUT/GCLR
INPUT/OE1
INPUT/GCLK1
GND
I/O/GCLK3
I/O
I/O
VCCIO
I/O
I/O
I/O
84-lead PLCC
Top View
100-lead TQFP
Top View
100
99
98
97
96
95
94
93
92
91
90
89
88
87
86
85
84
83
82
81
80
79
78
77
76
160
159
158
157
156
155
154
153
152
151
150
149
148
147
146
145
144
143
142
141
140
139
138
137
136
135
134
133
132
131
130
129
128
127
126
125
124
123
122
121
I/O
I/O
I/O
I/O
I/O
GND
I/O
I/O
I/O
VCCINT
INPUT/OE2/GCLK2
INPUT/GCLR
INPUT/OE1
INPUT/GCLK1
GND
I/O/GCLK3
I/O
I/O
VCCIO
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O/PD2
I/O
N/C
N/C
N/C
N/C
I/O
I/O
I/O
I/O
I/O
GND
I/O
I/O
I/O
I/O
VCCINT
INPUT/OE2/GCLK2
INPUT/GCLR
INPUT/OE1
INPUT/GCLK1
GND
I/O/GCLK3
I/O
I/O
I/O
VCCIO
I/O
I/O
I/O
I/O
I/O
N/C
N/C
N/C
N/C
I/O
I/O
I/O
160-lead PQFP
Top View
75
74
73
72
71
70
69
68
67
66
65
64
63
62
61
60
59
58
57
56
55
54
53
52
51
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
I/O
GND
I/O/TDO
I/O
I/O
I/O
I/O
I/O
I/O
VCCIO
I/O
I/O
I/O
I/O/TCK
I/O
I/O
GND
I/O
I/O
I/O
I/O
I/O
I/O
I/O
VCCIO
N/C
N/C
N/C
N/C
N/C
N/C
N/C
VCCIO
I/O/TDI
I/O
I/O
I/O
I/O
I/O
I/O
I/O
GND
I/O
I/O
I/O
I/O
I/O/TMS
I/O
I/O
I/O
VCCIO
I/O
I/O
I/O
I/O
I/O
I/O
I/O
N/C
N/C
N/C
N/C
N/C
N/C
N/C
120
119
118
117
116
115
114
113
112
111
110
109
108
107
106
105
104
103
102
101
100
99
98
97
96
95
94
93
92
91
90
89
88
87
86
85
84
83
82
81
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
N/C
N/C
N/C
N/C
N/C
N/C
N/C
GND
I/O/TDO
I/O
I/O
I/O
I/O
I/O
I/O
I/O
VCCIO
I/O
I/O
I/O
I/O
I/O/TCK
I/O
I/O
I/O
GND
I/O
I/O
I/O
I/O
I/O
I/O
I/O
N/C
N/C
N/C
N/C
N/C
N/C
N/C
I/O
GND
I/O
N/C
N/C
N/C
N/C
I/O
I/O
I/O
I/O
I/O
I/O
I/O
VCCIO
I/O
I/O
I/O
I/O
GND
VCCINT
I/O
I/O/PD1
I/O
I/O
GND
I/O
I/O
I/O
I/O
I/O
I/O
I/O
N/C
N/C
N/C
N/C
I/O
VCCIO
I/O
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
GND
I/O
I/O
I/O
I/O
I/O
I/O
I/O
VCCIO
I/O
I/O
I/O
GND
VCCINT
I/O
I/O/PD2
I/O
GND
I/O
I/O
I/O
I/O
I/O
I/O
I/O
26
27
28
29
30
31
33
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
I/O/PD1
I/O
VCCIO
I/O/TDI
I/O
I/O
I/O
I/O
I/O
I/O
GND
I/O
I/O
I/O
I/O/TMS
I/O
I/O
VCCIO
I/O
I/O
I/O
I/O
I/O
I/O
I/O
2
ATF1508ASV(L)
1408H–PLD–7/05
ATF1508ASV(L)
Block Diagram
6 to 12
3
1408H–PLD–7/05
Description
The ATF1508ASV(L) is a high-performance, high-density complex programmable logic
device (CPLD) that utilizes Atmel’s proven electrically-erasable technology. With 128
logic macrocells and up to 100 inputs, it easily integrates logic from several TTL, SSI,
MSI, LSI and classic PLDs. The ATF1508ASV(L)’s enhanced routing switch matrices
increase usable gate count and increase odds of successful pin-locked design
modifications.
The ATF1508ASV(L) has up to 96 bi-directional I/O pins and four dedicated input pins,
depending on the type of device package selected. Each dedicated pin can also serve
as a global control signal, register clock, register reset or output enable. Each of these
control signals can be selected for use individually within each macrocell.
Each of the 128 macrocells generates a buried feedback that goes to the global bus.
Each input and I/O pin also feeds into the global bus. The switch matrix in each logic
block then selects 40 individual signals from the global bus. Each macrocell also generates a foldback logic term that goes to a regional bus. Cascade logic between
macrocells in the ATF1508ASV(L) allows fast, efficient generation of complex logic functions. The ATF1508ASV(L) contains eight such logic chains, each capable of creating
sum term logic with a fan-in of up to 40 product terms.
The ATF1508ASV(L) macrocell, shown in Figure 1, is flexible enough to support highlycomplex logic functions operating at high-speed. The macrocell consists of five sections:
product terms and product term select multiplexer, OR/XOR/CASCADE logic, a flip-flop,
output select and enable, and logic array inputs.
Unused macrocells are automatically disabled by the compiler to decrease power consumption. A security fuse, when programmed, protects the contents of the
ATF1508ASV(L). Two bytes (16 bits) of User Signature are accessible to the user for
purposes such as storing project name, part number, revision or date. The User Signature is accessible regardless of the state of the security fuse.
The ATF1508ASV(L) device is an in-system programmable (ISP) device. It uses the
industry-standard 4-pin JTAG interface (IEEE Std. 1149.1), and is fully-compliant with
JTAG’s Boundary-scan Description Language (BSDL). ISP allows the device to be programmed without removing it from the printed circuit board. In addition to simplifying the
manufacturing flow, ISP also allows design modifications to be made in the field via
software.
Product Terms and Select
Mux
Each ATF1508ASV(L) macrocell has five product terms. Each product term receives as
its inputs all signals from both the global bus and regional bus.
The product term select multiplexer (PTMUX) allocates the five product terms as
needed to the macrocell logic gates and control signals. The PTMUX programming is
determined by the design compiler, which selects the optimum macrocell configuration.
OR/XOR/CASCADE Logic
The ATF1508ASV(L)’s logic structure is designed to efficiently support all types of logic.
Within a single macrocell, all the product terms can be routed to the OR gate, creating a
5-input AND/OR sum term. With the addition of the CASIN from neighboring macrocells,
this can be expanded to as many as 40 product terms with little additional delay.
The macrocell’s XOR gate allows efficient implementation of compare and arithmetic
functions. One input to the XOR comes from the OR sum term. The other XOR input can
be a product term or a fixed high- or low-level. For combinatorial outputs, the fixed level
input allows polarity selection. For registered functions, the fixed levels allow DeMorgan
minimization of product terms. The XOR gate is also used to emulate T- and JK-type
flip-flops.
4
ATF1508ASV(L)
1408H–PLD–7/05
ATF1508ASV(L)
Flip-flop
The ATF1508ASV(L)’s flip-flop has very flexible data and control functions. The data
input can come from either the XOR gate, from a separate product term or directly from
the I/O pin. Selecting the separate product term allows creation of a buried registered
feedback within a combinatorial output macrocell. (This feature is automatically implemented by the fitter software). In addition to D, T, JK and SR operation, the flip-flop can
also be configured as a flow-through latch. In this mode, data passes through when the
clock is high and is latched when the clock is low.
The clock itself can either be the Global CLK Signal (GCK) or an individual product term.
The flip-flop changes state on the clock's rising edge. When the GCK signal is used as
the clock, one of the macrocell product terms can be selected as a clock enable. When
the clock enable function is active and the enable signal (product term) is low, all clock
edges are ignored. The flip-flop’s asynchronous reset signal (AR) can be either the Global Clear (GCLEAR), a product term, or always off. AR can also be a logic OR of
GCLEAR with a product term. The asynchronous preset (AP) can be a product term or
always off.
Figure 1. ATF1508ASV(L) Macrocell
5
1408H–PLD–7/05
Extra Feedback
The ATF15xxSE Family macrocell output can be selected as registered or combinatorial. The extra buried feedback signal can be either combinatorial or a registered signal
regardless of whether the output is combinatorial or registered. (This enhancement
function is automatically implemented by the fitter software.) Feedback of a buried combinatorial output allows the creation of a second latch within a macrocell.
I/O Control
The output enable multiplexer (MOE) controls the output enable signal. Each I/O can be
individually configured as an input, output or for bi-directional operation. The output
enable for each macrocell can be selected from the true or compliment of the two output
enable pins, a subset of the I/O pins, or a subset of the I/O macrocells. This selection is
automatically done by the fitter software when the I/O is configured as an input, all macrocell resources are still available, including the buried feedback, expander and cascade
logic.
Global Bus/Switch Matrix
The global bus contains all input and I/O pin signals as well as the buried feedback signal from all 128 macrocells. The switch matrix in each logic block receives as its inputs
all signals from the global bus. Under software control, up to 40 of these signals can be
selected as inputs to the logic block.
Foldback Bus
Each macrocell also generates a foldback product term. This signal goes to the regional
bus and is available to 16 macrocells. The foldback is an inverse polarity of one of the
macrocell’s product terms. The 16 foldback terms in each region allow generation of
high fan-in sum terms (up to 21 product terms) with little additional delay.
Open-collector Output Option
This option enables the device output to provide control signals such as an interrupt that
can be asserted by any of the several devices.
6
ATF1508ASV(L)
1408H–PLD–7/05
ATF1508ASV(L)
Programmable Pinkeeper Option for
Inputs and I/Os
The ATF1508ASV(L) offers the option of programming all input and I/O pins so that “pinkeeper” circuits can be utilized. When any pin is driven high or low and then subsequently left floating, it will stay at that previous high- or low-level. This circuitry prevents
unused input and I/O lines from floating to intermediate voltage levels, which causes
unnecessary power consumption and system noise. The keeper circuits eliminate the
need for external pull-up resistors and eliminate their DC power consumption.
Input Diagram
Speed/Power
Management
The ATF1508ASV(L) has several built-in speed and power management features. The
ATF1508ASV(L) contains circuitry that automatically puts the device into a low-power
standby mode when no logic transitions are occurring. This not only reduces power consumption during inactive periods, but also provides proportional power-savings for most
applications running at system speeds below 5 MHz.
To further reduce power, each ATF1508ASV(L) macrocell has a reduced-power bit feature. This feature allows individual macrocells to be configured for maximum powersavings. This feature may be selected as a design option.
I/O Diagram
7
1408H–PLD–7/05
All ATF1508 also have an optional power-down mode. In this mode, current drops to
below 10 mA. When the power-down option is selected, either PD1 or PD2 pins (or
both) can be used to power down the part. The power-down option is selected in the
design source file. When enabled, the device goes into power-down when either PD1 or
PD2 is high. In the power-down mode, all internal logic signals are latched and held, as
are any enabled outputs.
All pin transitions are ignored until the PD pin is brought low. When the power-down feature is enabled, the PD1 or PD2 pin cannot be used as a logic input or output. However,
the pin’s macrocell may still be used to generate buried foldback and cascade logic
signals.
All power-down AC characteristic parameters are computed from external input or I/O
pins, with reduced-power bit turned on. For macrocells in reduced-power mode
(reduced-power bit turned on), the reduced-power adder, tRPA, must be added to the AC
parameters, which include the data paths tLAD, tLAC, tIC, tACL, tACH and tSEXP.
Each output also has individual slew rate control. This may be used to reduce system
noise by slowing down outputs that do not need to operate at maximum speed. Outputs
default to slow switching, and may be specified as fast switching in the design file.
Design Software
Support
ATF1508ASV(L) designs are supported by several third-party tools. Automated fitters
allow logic synthesis using a variety of high-level description languages and formats.
Power-up Reset
The ATF1508ASV is designed with a power-up reset, a feature critical for state machine
initialization. At a point delayed slightly from VCC crossing VRST, all registers will be initialized, and the state of each output will depend on the polarity of its buffer. However,
due to the asynchronous nature of reset and uncertainty of how VCC actually rises in the
system, the following conditions are required:
1. The VCC rise must be monotonic,
2. After reset occurs, all input and feedback setup times must be met before driving
the clock pin high, and,
3. The clock must remain stable during TD.
The ATF1508ASV has two options for the hysteresis about the reset level, VRST, Small
and Large. To ensure a robust operating environment in applications where the device
is operated near 3.0V, Atmel recommends that during the fitting process users configure
the device with the Power-up Reset hysteresis set to Large. For conversions, Atmel
POF2JED users should include the flag “-power_reset” on the command line after “filename.POF”. To allow the registers to be properly reinitialized with the Large hysteresis
option selected, the following condition is added:
4. If VCC falls below 2.0V, it must shut off completely before the device is turned on
again.
When the Large hysteresis option is active, ICC is reduced by several hundred microamps as well.
Security Fuse Usage
8
A single fuse is provided to prevent unauthorized copying of the ATF1508ASV(L) fuse
patterns. Once programmed, fuse verify is inhibited. However, User Signature and
device ID remains accessible.
ATF1508ASV(L)
1408H–PLD–7/05
ATF1508ASV(L)
Programming
ATF1508ASV(L) devices are in-system programmable (ISP) devices utilizing the 4-pin
JTAG protocol. This capability eliminates package handling normally required for programming and facilitates rapid design iterations and field changes.
Atmel provides ISP hardware and software to allow programming of the
ATF1508ASV(L) via the PC. ISP is performed by using either a download cable, a comparable board tester or a simple microprocessor interface.
To allow ISP programming support by the Automated Test Equipment (ATE) vendors,
Serial Vector Format (SVF) files can be created by the Atmel ISP software. Conversion
to other ATE tester format beside SVF is also possible
ATF1508ASV(L) devices can also be programmed using standard third-party programmers. With third-party programmer, the JTAG ISP port can be disabled thereby allowing
four additional I/O pins to be used for logic.
Contact your local Atmel representatives or Atmel PLD applications for details.
ISP Programming
Protection
The ATF1508ASV(L) has a special feature that locks the device and prevents the inputs
and I/O from driving if the programming process is interrupted for any reason. The
inputs and I/O default to high-Z state during such a condition. In addition the pin-keeper
option preserves the former state during device programming.
All ATF1508ASV(L) devices are initially shipped in the erased state thereby making
them ready to use for ISP.
Note:
For more information refer to the “Designing for In-System Programmability with Atmel
CPLDs” application note.
9
1408H–PLD–7/05
DC and AC Operating Conditions
Commercial
Industrial
Operating Temperature (Ambient)
0°C - 70°C
-40°C - 85°C
VCC (3.3V) Power Supply
3.0V - 3.6V
3.0V - 3.6V
DC Characteristics
Symbol
Parameter
Condition
IIL
Input or I/O Low
Leakage Current
VIN = VCC
IIH
Input or I/O High
Leakage Current
IOZ
Tri-State Output
Off-State Current
Min
VO = VCC or GND
Typ
Max
Units
-2
-10
µA
2
10
µA
40
µA
-40
Com.
115
mA
Ind.
135
mA
Com.
5
µA
Ind.
5
µA
Std Mode
ICC1
Power Supply
Current, Standby
VCC = Max
VIN = 0, VCC
“L” Mode
ICC2
Power Supply Current,
Power-down Mode
VCC = Max
VIN = 0, VCC
“PD” Mode
ICC3(2)
Reduced-power Mode
Supply Current, Standby
VCC = Max
VIN = 0, VCC
Std Mode
VIL
Input Low Voltage
-0.3
0.8
V
VIH
Input High Voltage
1.7
VCCIO + 0.3
V
Output Low Voltage (TTL)
VOH
Notes:
5
mA
Com.
60
mA
Ind.
80
mA
VIN = VIH or VIL
VCC = Min, IOL = 8 mA
Com.
0.45
V
Ind.
0.45
V
VIN = VIH or VIL
VCC = Min, IOL = 0.1 mA
Com.
0.2
V
Ind.
0.2
V
VOL
Output Low Voltage (CMOS)
0.1
Output High Voltage
– 3.3V (TTL)
VIN = VIH or VIL
VCC = Min, IOH = -2.0 mA
Output High Voltage
– 3.3V (CMOS)
VIN = VIH or VIL
VCCIO = Min, IOH = -0.1 mA
2.4
V
VCCIO - 0.2
V
1. Not more than one output at a time should be shorted. Duration of short circuit test should not exceed 30 sec.
2. ICC3 refers to the current in the reduced-power mode when macrocell reduced-power is turned ON.
Pin Capacitance
Typ
CIN
CI/O
Note:
10
Max
Units
Conditions
8
pF
VIN = 0V; f = 1.0 MHz
8
pF
VOUT = 0V; f = 1.0 MHz
Typical values for nominal supply voltage. This parameter is only sampled and is not 100% tested. The OGI pin (high-voltage pin
during programming) has a maximum capacitance of 12 pF.
ATF1508ASV(L)
1408H–PLD–7/05
ATF1508ASV(L)
Absolute Maximum Ratings*
Temperature Under Bias.................................. -40°C to +85°C
*NOTICE:
Stresses beyond those listed under “Absolute
Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and
functional operation of the device at these or any
other conditions beyond those indicated in the
operational sections of this specification is not
implied. Exposure to absolute maximum rating
conditions for extended periods may affect device
reliability.
Note:
Minimum voltage is -0.6V DC, which may undershoot to -2.0V for pulses of less than 20 ns. Maximum output pin voltage is VCC + 0.75V DC,
which may overshoot to 7.0V for pulses of less
than 20 ns.
Storage Temperature ..................................... -65°C to +150°C
Voltage on Any Pin with
Respect to Ground .........................................-2.0V to +7.0V(1)
Voltage on Input Pins
with Respect to Ground
During Programming.....................................-2.0V to +14.0V(1)
Programming Voltage with
Respect to Ground .......................................-2.0V to +14.0V(1)
1.
Timing Model
Internal Output
Enable Delay
tIOE
Global Control
Delay
tGLOB
Input
Delay
tIN
Switch
Matrix
tUIM
Logic Array
Delay
tLAD
Register Control
Delay
tLAC
tIC
tEN
Foldback Term
Delay
tSEXP
Cascade Logic
Delay
tPEXP
Fast Input
Delay
tFIN
Register
Delay
tSU
tH
tPRE
tCLR
tRD
tCOMB
tFSU
tFH
Output
Delay
tOD1
tOD2
tOD3
tXZ
tZX1
tZX2
tZX3
I/O Delay
tIO
11
1408H–PLD–7/05
AC Characteristics(1)
-15
Symbol
Parameter
tPD1
-20
Min
Max
Input or Feedback to Non-registered Output
3
tPD2
I/O Input or Feedback to Non-registered Feedback
3
tSU
Global Clock Setup Time
11
13.5
ns
tH
Global Clock Hold Time
0
0
ns
tFSU
Global Clock Setup Time of Fast Input
3
3
ns
tFH
Global Clock Hold Time of Fast Input
1.0
2.0
MHz
tCOP
Global Clock to Output Delay
tCH
Global Clock High Time
5
6
ns
tCL
Global Clock Low Time
5
6
ns
tASU
Array Clock Setup Time
5
7
ns
tAH
Array Clock Hold Time
4
4
ns
tACOP
Array Clock Output Delay
tACH
Array Clock High Time
6
8
ns
tACL
Array Clock Low Time
6
8
ns
tCNT
Minimum Clock Global Period
fCNT
Maximum Internal Global Clock Frequency
tACNT
Minimum Array Clock Period
fACNT
Maximum Internal Array Clock Frequency
76.9
58.8
MHz
fMAX
Maximum Clock Frequency
100
83.3
MHz
tIN
Input Pad and Buffer Delay
2
2.5
ns
tIO
I/O Input Pad and Buffer Delay
2
2.5
ns
tFIN
Fast Input Delay
2
2
ns
tSEXP
Foldback Term Delay
8
10
ns
tPEXP
Cascade Logic Delay
1
1
ns
tLAD
Logic Array Delay
6
8
ns
tLAC
Logic Control Delay
3.5
4.5
ns
tIOE
Internal Output Enable Delay
3
3
ns
tOD1
Output Buffer and Pad Delay
(Slow slew rate = OFF; VCCIO = 5V; CL = 35 pF)
3
4
ns
tOD2
Output Buffer and Pad Delay
(Slow slew rate = OFF; VCCIO = 3.3V; CL = 35 pF)
3
4
ns
tOD3
Output Buffer and Pad Delay
(Slow slew rate = ON; VCCIO = 5V or 3.3V; CL = 35 pF)
5
6
ns
tZX1
Output Buffer Enable Delay
(Slow slew rate = OFF; VCCIO = 5.0V; CL = 35 pF)
7
9
12
Min
Max
Units
15
20
ns
12
16
ns
9
12
15
18.5
13
76.9
ns
17
66
13
ns
ns
MHz
17
ns
ATF1508ASV(L)
1408H–PLD–7/05
ATF1508ASV(L)
AC Characteristics(1) (Continued)
-15
Symbol
Parameter
Max
Units
tZX2
Output Buffer Enable Delay
(Slow slew rate = OFF; VCCIO = 3.3V; CL = 35 pF)
7
9
ns
tZX3
Output Buffer Enable Delay
(Slow slew rate = ON; VCCIO = 5.0V/3.3V; CL = 35 pF)
10
11
ns
tXZ
Output Buffer Disable Delay
(CL = 5 pF)
6
7
ns
tSU
Register Setup Time
5
6
ns
tH
Register Hold Time
4
5
ns
tFSU
Register Setup Time of Fast Input
2
2
ns
tFH
Register Hold Time of Fast Input
2
2
ns
tRD
Register Delay
2
2.5
ns
tCOMB
Combinatorial Delay
2
3
ns
tIC
Array Clock Delay
6
7
ns
tEN
Register Enable Time
6
7
ns
tGLOB
Global Control Delay
2
3
ns
tPRE
Register Preset Time
4
5
ns
tCLR
Register Clear Time
4
5
ns
tUIM
Switch Matrix Delay
2
2.5
ns
10
13
ns
(2)
Reduced-Power Adder
tRPA
Notes:
Min
-20
Max
Min
1. See ordering information for valid part numbers.
2. The tRPA parameter must be added to the tLAD, tLAC,tTIC, tACL, and tSEXP parameters for macrocells running in the reducedpower mode.
Input Test Waveforms and Measurement Levels
tR, tF = 1.5 ns typical
13
1408H–PLD–7/05
Output AC Test Loads
3.0V
703
8060
Power-down Mode
The ATF1508ASV(L) includes two pins for optional pin-controlled power-down feature.
When this mode is enabled, the PD pin acts as the power-down pin. When the PD1 and
PD2 pin is high, the device supply current is reduced to less than 5 mA. During powerdown, all output data and internal logic states are latched and held. Therefore, all registered and combinatorial output data remain valid. Any outputs that were in a high-Z state
at the onset will remain at high-Z. During power-down, all input signals except the
power-down pin are blocked. Input and I/O hold latches remain active to ensure that
pins do not float to indeterminate levels, further reducing system power. The powerdown pin feature is enabled in the logic design file. Designs using either power-down pin
may not use the PD pin logic array input. However, buried logic resources in this macrocell may still be used.
Power Down AC Characteristics(1)(2)
-15
Symbol
Parameter
tIVDH
Valid I, I/O before PD High
tGVDH
Min
-20
Max
Min
Max
Units
15
20
ns
before PD High
15
20
ns
(2)
15
20
ns
(2)
Valid OE
tCVDH
Valid Clock
tDHIX
I, I/O Don’t Care after PD High
25
30
ns
tDHGX
OE(2) Don’t Care after PD High
25
30
ns
25
30
ns
(2)
before PD High
tDHCX
Clock
tDLIV
PD Low to Valid I, I/O
1
1
µs
tDLGV
PD Low to Valid OE (Pin or Term)
1
1
µs
tDLCV
PD Low to Valid Clock (Pin or Term)
1
1
µs
tDLOV
PD Low to Valid Output
1
1
µs
Notes:
14
Don’t Care after PD High
1. For slow slew outputs, add tSSO.
2. Pin or product term.
ATF1508ASV(L)
1408H–PLD–7/05
ATF1508ASV(L)
JTAG-BST Overview
The JTAG-BST (JTAG boundary-scan testing) is controlled by the Test Access Port
(TAP) controller in the ATF1508ASV(L). The boundary-scan technique involves the
inclusion of a shift-register stage (contained in a boundary-scan cell) adjacent to each
component so that signals at component boundaries can be controlled and observed
using scan testing principles. Each input pin and I/O pin has its own Boundary-scan Cell
(BSC) in order to support boundary-scan testing. The ATF1508ASV(L) does not currently include a Test Reset (TRST) input pin because the TAP controller is automatically
reset at power-up. The six JTAG-BST modes supported include: SAMPLE/PRELOAD,
EXTEST, BYPASS and IDCODE. BST on the ATF1508ASV(L) is implemented using
the Boundary-scan Definition Language (BSDL) described in the JTAG specification
(IEEE Standard 1149.1). Any third-party tool that supports the BSDL format can be used
to perform BST on the ATF1508ASV(L).
The ATF1508ASV(L) also has the option of using four JTAG-standard I/O pins for insystem programming (ISP). The ATF1508ASV(L) is programmable through the four
JTAG pins using programming-compatible with the IEEE JTAG Standard 1149.1. Programming is performed by using 5V TTL-level programming signals from the JTAG ISP
interface. The JTAG feature is a programmable option. If JTAG (BST or ISP) is not
needed, then the four JTAG control pins are available as I/O pins.
JTAG Boundary-scan
Cell (BSC) Testing
The ATF1508ASV(L) contains up to 96 I/O pins and four input pins, depending on the
device type and package type selected. Each input pin and I/O pin has its own boundary-scan cell (BSC) in order to support boundary-scan testing as described in detail by
IEEE Standard 1149.1. A typical BSC consists of three capture registers or scan registers and up to two update registers. There are two types of BSCs, one for input or I/O
pin, and one for the macrocells. The BSCs in the device are chained together through
the (BST) capture registers. Input to the capture register chain is fed in from the TDI pin
while the output is directed to the TDO pin. Capture registers are used to capture active
device data signals, to shift data in and out of the device and to load data into the update
registers. Control signals are generated internally by the JTAG TAP controller. The BSC
configuration for the input and I/O pins and macrocells are shown below.
BSC Configuration Pins and Macrocells (Except JTAG TAP Pins)
Note:
The ATF1508ASV(L) has pull-up option on TMS and TDI pins. This feature is selected as a design option.
15
1408H–PLD–7/05
Boundary-scan
Definition Language
(BSDL) Models for
the ATF1508
These are now available in all package types via the Atmel web site. These models can
be used for Boundary-scan Test Operation in the ATF1508ASV(L) and have been
scheduled to conform to the IEEE 1149.1 standard.
BSC Configuration for Macrocell
Pin BSC
TDO
0
1
Pin
DQ
Capture
DR
Clock
TDI
Shift
TDO
OEJ
0
0
1
D Q
D Q
1
OUTJ
0
0
Pin
1
D Q
D Q
Capture
DR
Update
DR
1
Mode
TDI
Shift
Clock
Macrocell BSC
16
ATF1508ASV(L)
1408H–PLD–7/05
ATF1508ASV(L)
ATF1508ASV(L) Dedicated Pinouts
Dedicated Pin
84-lead J-lead
100-lead PQFP
100-lead TQFP
160-lead PQFP
INPUT/OE2/GCLK2
2
92
90
142
INPUT/GCLR
1
91
89
141
INPUT/OE1
84
90
88
140
INPUT/GCLK1
83
89
87
139
I/O/GCLK3
81
87
85
137
12,45
3,43
1,41
63,159
I/O/TDI(JTAG)
14
6
4
9
I/O/TMS(JTAG)
23
17
15
22
I/O/TCK(JTAG)
62
64
62
99
I/O/TDO(JTAG)
71
75
73
112
GND
7,19,32,42,
47,59,72,82
13,28,40,45,
61,76,88,97
11,26,38,43,
59,74,86,95
17,42,60,66,95,
113,138,148
VCC
3,13,26,38,
43,53,66,78
5,20,36,41,
53,68,84,93
3,18,34,39,
51,66,82,91
8,26,55,61,79,104,133,143
I/O/PD (1, 2)
-
-
-
1,2,3,4,5,6,7,34,35,36,
37,38,39,40,44,45,46,
47,74,75,76,77,81,82,
83,84,85,86,87,114,
115,116,117,118,119,
120,124,125,126,127,
154,155,156,157
# of SIGNAL PINS
68
84
84
100
# USER I/O PINS
64
80
80
96
N/C
OE (1, 2)
Global OE pins
GCLR
Global Clear pin
GCLK (1, 2, 3)
Global Clock pins
PD (1, 2)
Power-down pins
TDI, TMS, TCK, TDO
JTAG pins used for boundary-scan testing or in-system programming
GND
Ground pins
VCC
VCC pins for the device
17
1408H–PLD–7/05
ATF1508ASV(L) I/O Pinouts
MC
PLB
84-lead
J-lead
100-lead
PQFP
100-lead
TQFP
160-lead
PQFP
MC
PLB
84-lead
J-lead
100-lead
PQFP
100-lead
TQFP
160-lead
PQFP
1
A
-
4
2
160
33
C
-
27
25
41
2
A
-
-
-
-
34
C
-
-
-
-
3
A/
PD1
12
3
1
159
35
C
31
26
24
33
4
A
-
-
-
158
36
C
-
-
-
32
5
A
11
2
100
153
37
C
30
25
23
31
6
A
10
1
99
152
38
C
29
24
22
30
7
A
-
-
-
-
39
C
-
-
-
-
8
A
9
100
98
151
40
C
28
23
21
29
9
A
-
99
97
150
41
C
-
22
20
28
10
A
-
-
-
-
42
C
-
-
-
-
11
A
8
98
96
149
43
C
27
21
19
27
12
A
-
-
-
147
44
C
-
-
-
25
13
A
6
96
94
146
45
C
25
19
17
24
14
A
5
95
93
145
46
C
24
18
16
23
15
A
-
-
-
-
47
C
-
-
-
-
16
A
4
94
92
144
48
C/
TMS
23
17
15
22
17
B
22
16
14
21
49
D
41
39
37
59
18
B
-
-
-
-
50
D
-
-
-
-
19
B
21
15
13
20
51
D
40
38
36
58
20
B
-
-
-
19
52
D
-
-
-
57
21
B
20
14
12
18
53
D
39
37
35
56
22
B
-
12
10
16
54
D
-
35
33
54
23
B
-
-
-
-
55
D
-
-
-
-
24
B
18
11
9
15
56
D
37
34
32
53
25
B
17
10
8
14
57
D
36
33
31
52
26
B
-
-
-
-
58
D
-
-
-
-
27
B
16
9
7
13
59
D
35
32
30
51
28
B
-
-
-
12
60
D
-
-
-
50
29
B
15
8
6
11
61
D
34
31
29
49
30
B
-
7
5
10
62
D
-
30
28
48
31
B
-
-
-
-
63
D
-
-
-
-
32
B/
TDI
14
6
4
9
64
D
33
29
27
43
65
E
44
42
40
62
97
G
63
65
63
100
66
E
-
-
-
-
98
G
-
-
-
-
18
ATF1508ASV(L)
1408H–PLD–7/05
ATF1508ASV(L)
ATF1508ASV(L) I/O Pinouts (Continued)
84-lead
J-lead
100-lead
PQFP
100-lead
TQFP
160-lead
PQFP
MC
PLB
84-lead
J-lead
100-lead
PQFP
100-lead
TQFP
160-lead
PQFP
E/
PD2
45
43
41
63
99
G
64
66
64
101
68
E
-
-
-
64
100
G
-
-
-
102
69
E
46
44
42
65
101
G
65
67
65
103
70
E
-
46
44
67
102
G
-
69
67
105
71
E
-
-
-
-
103
G
-
-
-
-
72
E
48
47
45
68
104
G
67
70
68
106
73
E
49
48
46
69
105
G
68
71
69
107
74
E
-
-
-
-
106
G
-
-
-
-
75
E
50
49
47
70
107
G
69
72
70
108
76
E
-
-
-
71
108
G
-
-
-
109
77
E
51
50
48
72
109
G
70
73
71
110
78
E
-
51
49
73
110
G
-
74
72
111
79
E
-
-
-
-
111
G
-
-
-
-
80
E
52
52
50
78
112
G/
TDO
71
75
73
112
81
F
-
54
52
80
113
H
-
77
75
121
82
F
-
-
-
-
114
H
-
-
-
-
83
F
54
55
53
88
115
H
73
78
76
122
84
F
-
-
-
89
116
H
-
-
-
123
85
F
55
56
54
90
117
H
74
79
77
128
86
F
56
57
55
91
118
H
75
80
78
129
87
F
-
-
-
-
119
H
-
-
-
-
88
F
57
58
56
92
120
H
76
81
79
130
89
F
-
59
57
93
121
H
-
82
80
131
90
F
-
-
-
-
122
H
-
-
-
-
91
F
58
60
58
94
123
H
77
83
81
132
92
F
-
-
-
96
124
H
-
-
-
134
93
F
60
62
60
97
125
H
79
85
83
135
94
F
61
63
61
98
126
H
80
86
84
136
95
F
-
-
-
-
127
H
-
-
-
-
96
F/
TCK
62
64
62
99
128
H/
GCLK3
81
87
85
137
MC
PLB
67
19
1408H–PLD–7/05
SUPPLY CURRENT VS. SUPPLY VOLTAGE
PIN-CONTROLLED POWER-DOWN MODE
(TA = 25°C, F = 0)
SUPPLY CURRENT VS. SUPPLY VOLTAGE
(TA = 25°C, F = 0)
200
800
STANDARD POWER
STANDARD & REDUCED POWER MODE
ICC (uA)
ICC (mA)
700
100
600
REDUCED POWER
500
0
2.50
2.75
3.00
3.25
3.50
3.75
400
2.50
4.00
SUPPLY VOLTAGE (V)
SUPPLY CURRENT VS. FREQUENCY
STANDARD POWER (TA = 25°C)
2.75
3.00
3.25
3.50
SUPPLY VOLTAGE (V)
3.75
4.00
SUPPLY CURRENT VS. FREQUENCY
LOW-POWER ("L") VERSION
(TA = 25°C)
250.0
125.0
200.0
STANDARD POWER
100.0
150.0
ICC (mA)
ICC (mA)
STANDARD POWER
100.0
REDUCED POWER MODE
50.0
75.0
REDUCED POWER
50.0
25.0
0.0
0.00
20.00
40.00
60.00
80.00
100.00
FREQUENCY (MHz)
0.0
0.00
5.00
10.00
15.00
20.00
FREQUENCY (MHz)
SUPPLY CURRENT VS. SUPPLY VOLTAGE
LOW POWER ("L") MODE
(TA = 25°C, F = 0)
10
9
8
ICC (uA)
7
6
5
4
3
2
1
0
2.50
20
2.75
3.00
3.25
3.50
SUPPLY VOLTAGE (V)
3.75
4.00
ATF1508ASV(L)
1408H–PLD–7/05
ATF1508ASV(L)
OUTPUT SOURCE CURRENT
VS. SUPPLY VOLTAGE (VOH = 2.4V, TA = 25°C)
OUTPUT SOURCE CURRENT
VS. OUTPUT VOLTAGE (VCC = 3.3V,TA = 25°C)
0
10
-2
0
-10
-6
IOH (mA)
IOH (mA)
-4
-8
-10
-20
-30
-40
-50
-12
-60
-14
-70
-16
2.75
0.0
3.00
3.25
3.50
3.75
0.5
1.0
4.00
1.5
2.0
2.5
3.0
3.5
4.0
OUTPUT VOLTAGE (V)
SUPPLY VOLTAGE (V)
OUTPUT SINK CURRENT
VS. SUPPLY VOLTAGE (VOL = 0.5V, TA = 25°C)
OUTPUT SINK CURRENT
VS. OUTPUT VOLTAGE (VCC = 3.3V, TA = 25°C)
100
40
80
IOL (mA)
IOL (mA)
35
30
25
60
40
20
0
20
2.75
3.00
3.25
3.50
3.75
0
4.00
0.5
1
1.5
2
2.5
3
3.5
4
OUTPUT VOLTAGE (V)
SUPPLY VOLTAGE (V)
INPUT CURRENT vs. INPUT VOLTAGE
(VCC = 3.3V, TA = 25°C)
INPUT CLAMP CURRENT
VS. INPUT VOLTAGE (VCC = 3.3V, TA = 25°C)
15
INPUT CURRENT (uA)
INPUT CURRENT (mA)
0
-20
-40
-60
-80
-100
10
5
0
-5
-10
-1
-0.9
-0.8
-0.7
-0.6
-0.5
-0.4
INPUT VOLTAGE (V)
-0.3
-0.2
-0.1
0
0
0.5
1
1.5
2
2.5
3
3.5
INPUT VOLTAGE (V)
21
1408H–PLD–7/05
Ordering Information
ATF1508ASV(L) Standard Package Options
tPD
(ns)
tCO1
(ns)
8
fMAX
(MHz)
Ordering Code
Package
ATF1508ASV-15 JC84
84J
ATF1508ASV-15 QC100
100Q1
ATF1508ASV-15 AC100
100A
ATF1508ASV-15 QC160
160Q
100
ATF1508ASV-15 JI84
ATF1508ASV-15 QI100
ATF1508ASV-15 AI100
ATF1508ASV-15 QI160
84J
100Q1
100A
160Q
Industrial
(-40°C to +85°C)
83.3
ATF1508ASVL-20 JC84
ATF1508ASVL-20 QC100
ATF1508ASVL-20 AC100
ATF1508ASVL-20 QC160
84J
100Q1
100A
160Q
Commercial
(0°C to 70°C)
83.3
ATF1508ASVL-20 JI84
ATF1508ASVL-20 QI100
ATF1508ASVL-20 AI100
ATF1508ASVL-20 QI160
84J
100Q1
100A
160Q
Industrial
(-40°C to +85°C)
100
15
8
12
20
12
Note:
Operation Range
Commercial
(0°C to 70°C)
1. The last time buy is Sept. 30, 2005 for shaded parts.
Using “C” Product for Industrial
There is very little risk in using “C” devices for industrial applications because the VCC conditions for 3.3V products are
the same for commercial and industrial (there is only 15°C difference at the high end of the temperature range). To use
commercial product for industrial temperature ranges, de-rate ICC by 15%.
ATF1508ASV(L) Green Package Options (Pb/Halide-free/RoHS Compliant)
tPD
(ns)
tCO1
(ns)
fMAX
(MHz)
15
8
20
12
Ordering Code
Package
Operation Range
100
ATF1508ASV-15 JU84
ATF1508ASV-15 AU100
84J
100A
Industrial
(-40°C to +85°C)
83.3
ATF1508ASVL-20 JU84
ATF1508ASVL-20 AU100
84J
100A
Industrial
(-40°C to +85°C)
Package Type
84J
84-lead, Plastic J-leaded Chip Carrier (PLCC)
100Q1
100-lead, Plastic Quad Pin Flat Package (PQFP)
100A
100-lead, Very Thin Plastic Gull Wing Quad Flat Package (TQFP)
160Q
160-lead, Plastic Quad Pin Flat Package (PQFP)
22
ATF1508ASV(L)
1408H–PLD–7/05
ATF1508ASV(L)
Packaging Information
84J – PLCC
1.14(0.045) X 45˚
PIN NO. 1
1.14(0.045) X 45˚
0.318(0.0125)
0.191(0.0075)
IDENTIFIER
E1
D2/E2
B1
E
B
e
A2
D1
A1
D
A
0.51(0.020)MAX
45˚ MAX (3X)
COMMON DIMENSIONS
(Unit of Measure = mm)
Notes:
1. This package conforms to JEDEC reference MS-018, Variation AF.
2. Dimensions D1 and E1 do not include mold protrusion.
Allowable protrusion is .010"(0.254 mm) per side. Dimension D1
and E1 include mold mismatch and are measured at the extreme
material condition at the upper or lower parting line.
3. Lead coplanarity is 0.004" (0.102 mm) maximum.
SYMBOL
MIN
NOM
MAX
A
4.191
–
4.572
A1
2.286
–
3.048
A2
0.508
–
–
D
30.099
–
30.353
D1
29.210
–
29.413
E
30.099
–
30.353
E1
29.210
–
29.413
D2/E2
27.686
–
28.702
B
0.660
–
0.813
B1
0.330
–
0.533
e
NOTE
Note 2
Note 2
1.270 TYP
10/04/01
R
2325 Orchard Parkway
San Jose, CA 95131
TITLE
84J, 84-lead, Plastic J-leaded Chip Carrier (PLCC)
DRAWING NO.
REV.
84J
B
23
1408H–PLD–7/05
100Q1 – PQFP
E
PIN 1 ID
PIN 1
e
D1
B
D
E1
COMMON DIMENSIONS
(Unit of Measure = mm)
JEDEC STANDARD MS-022, GC-1
A
0º~7º
C
L
A1
SYMBOL
MIN
NOM
MAX
A
–
3.04
3.4
A1
0.25
0.33
0.5
D
23.20 BSC
E
17.20 BSC
E1
14.00 BSC
B
0.22
C
0.11
D1
L
e
NOTE
–
0.40
–
0.23
20 BSC
0.73
–
1.03
0.65 BSC
07/6/2005
R
24
DRAWING NO.
TITLE
2325 Orchard Parkway
100Q1, 100-lead, 14 x 20 mm Body, 3.2 mm Footprint, 0.65 mm Pitch,
100Q1
San Jose, CA 95131
Plastic Quad Flat Package (PQFP)
REV.
C
ATF1508ASV(L)
1408H–PLD–7/05
ATF1508ASV(L)
100A – TQFP
PIN 1
B
PIN 1 IDENTIFIER
E1
e
E
D1
D
C
0˚~7˚
A1
A2
A
L
COMMON DIMENSIONS
(Unit of Measure = mm)
Notes:
1. This package conforms to JEDEC reference MS-026, Variation AED.
2. Dimensions D1 and E1 do not include mold protrusion. Allowable
protrusion is 0.25 mm per side. Dimensions D1 and E1 are maximum
plastic body size dimensions including mold mismatch.
3. Lead coplanarity is 0.08 mm maximum.
SYMBOL
MIN
NOM
MAX
A
–
–
1.20
A1
0.05
–
0.15
A2
0.95
1.00
1.05
D
15.75
16.00
16.25
D1
13.90
14.00
14.10
E
15.75
16.00
16.25
E1
13.90
14.00
14.10
B
0.17
–
0.27
C
0.09
–
0.20
L
0.45
–
0.75
e
NOTE
Note 2
Note 2
0.50 TYP
10/5/2001
R
2325 Orchard Parkway
San Jose, CA 95131
TITLE
100A, 100-lead, 14 x 14 mm Body Size, 1.0 mm Body Thickness,
0.5 mm Lead Pitch, Thin Profile Plastic Quad Flat Package (TQFP)
DRAWING NO.
100A
REV.
C
25
1408H–PLD–7/05
160Q – PQFP
Dimensions in Millimeters and (Inches).
Controlling dimension: Millimeters.
JEDEC Standard MS-022 DC-1
31.45(1.238)
SQ
30.95(1.218)
PIN 1 ID
PIN 1
0.40(0.016)
0.22(0.009)
0.65(0.0256)BSC
28.10(1.106)
27.90(1.098)
0.23(0.009)
SQ
4.10(0.161)MAX
0º~7º
0.11(0.004)
1.03(0.041)
0.73(0.029)
0.50(0.020)
0.25(0.010)
10/23/03
R
26
2325 Orchard Parkway
San Jose, CA 95131
TITLE
160Q, 160-lead, 28 x 28 mm Body, 3.2 mm Footprint,
0.65 mm Pitch, Plastic Quad Flat Package (PQFP)
DRAWING NO.
160Q
REV.
B
ATF1508ASV(L)
1408H–PLD–7/05
ATF1508ASV(L)
Revision History
Revision
Comments
1408H
Corrected list of last buy parts.
1408G
Green package options added.
27
1408H–PLD–7/05
Atmel Corporation
2325 Orchard Parkway
San Jose, CA 95131, USA
Tel: 1(408) 441-0311
Fax: 1(408) 487-2600
Regional Headquarters
Europe
Atmel Sarl
Route des Arsenaux 41
Case Postale 80
CH-1705 Fribourg
Switzerland
Tel: (41) 26-426-5555
Fax: (41) 26-426-5500
Asia
Room 1219
Chinachem Golden Plaza
77 Mody Road Tsimshatsui
East Kowloon
Hong Kong
Tel: (852) 2721-9778
Fax: (852) 2722-1369
Japan
9F, Tonetsu Shinkawa Bldg.
1-24-8 Shinkawa
Chuo-ku, Tokyo 104-0033
Japan
Tel: (81) 3-3523-3551
Fax: (81) 3-3523-7581
Atmel Operations
Memory
2325 Orchard Parkway
San Jose, CA 95131, USA
Tel: 1(408) 441-0311
Fax: 1(408) 436-4314
RF/Automotive
Theresienstrasse 2
Postfach 3535
74025 Heilbronn, Germany
Tel: (49) 71-31-67-0
Fax: (49) 71-31-67-2340
Microcontrollers
2325 Orchard Parkway
San Jose, CA 95131, USA
Tel: 1(408) 441-0311
Fax: 1(408) 436-4314
La Chantrerie
BP 70602
44306 Nantes Cedex 3, France
Tel: (33) 2-40-18-18-18
Fax: (33) 2-40-18-19-60
ASIC/ASSP/Smart Cards
1150 East Cheyenne Mtn. Blvd.
Colorado Springs, CO 80906, USA
Tel: 1(719) 576-3300
Fax: 1(719) 540-1759
Biometrics/Imaging/Hi-Rel MPU/
High Speed Converters/RF Datacom
Avenue de Rochepleine
BP 123
38521 Saint-Egreve Cedex, France
Tel: (33) 4-76-58-30-00
Fax: (33) 4-76-58-34-80
Zone Industrielle
13106 Rousset Cedex, France
Tel: (33) 4-42-53-60-00
Fax: (33) 4-42-53-60-01
1150 East Cheyenne Mtn. Blvd.
Colorado Springs, CO 80906, USA
Tel: 1(719) 576-3300
Fax: 1(719) 540-1759
Scottish Enterprise Technology Park
Maxwell Building
East Kilbride G75 0QR, Scotland
Tel: (44) 1355-803-000
Fax: (44) 1355-242-743
Literature Requests
www.atmel.com/literature
Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any
intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN ATMEL’S TERMS AND CONDITIONS OF SALE LOCATED ON ATMEL’S WEB SITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY
WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT
OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no
representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications
and product descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided
otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel’s products are not intended, authorized, or warranted for use
as components in applications intended to support or sustain life.
© Atmel Corporation 2005. All rights reserved. Atmel®, logo and combinations thereof, Everywhere You Are ® and others, are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others.
Printed on recycled paper.
1408H–PLD–7/05
xM
Similar pages