Kingbright APKA2810SYC 2.8x1.0mm right angle smd chip led lamp Datasheet

2.8X1.0mm RIGHT ANGLE SMD CHIP
LED LAMP
APKA2810SYC
SUPER BRIGHT YELLOW
Description
Features
2.8mmX1.0mm RIGHT ANGLE SMT LED, 1.2mm
The Super Bright Yellow device is made with DH
THICKNESS.
InGaAlP (on GaAs substrate) light emitting diode
LOW POWER CONSUMPTION.
chip.
IDEAL FOR BACKLIGHT AND INDICATOR.
VARIOUS COLORS AND LENS TYPES AVAILABLE.
PACKAGE : 2000PCS / REEL.
RoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(±0.01") unless otherwise noted.
3. Specifications are subject to change without notice.
SPEC NO: DSAD1130
REV NO: V.3
DATE: JUL/02/2005
PAGE: 1 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: W.J.ZHU
ERP:1204000241
Selection Guide
Part No.
Dice
APKA2810SYC
Iv (mcd)
@ 20 mA
Lens Type
SUPER BRIGHT YELLOW (InGaAlP)
WATER CLEAR
Viewing
Angle
Min.
Typ.
2θ
θ1/2
50
150
90°
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
λpeak
Peak Wavelength
Super Bright Yellow
λD
Dominant Wavelength
∆λ1/2
Max.
Units
Test Conditions
590
nm
IF=20mA
Super Bright Yellow
588
nm
IF=20mA
Spectral Line Half-width
Super Bright Yellow
28
nm
IF=20mA
C
Capacitance
Super Bright Yellow
25
pF
VF=0V;f=1MHz
VF
Forward Voltage
Super Bright Yellow
2.0
2.5
V
IF=20mA
IR
Reverse Current
Super Bright Yellow
10
uA
VR = 5V
Absolute Maximum Ratings at TA=25°C
Parameter
Super Bright Yellow
Units
Power dissipation
125
mW
DC Forward Current
30
mA
Peak Forward Current [1]
150
mA
5
V
Reverse Voltage
Operating/Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAD1130
REV NO: V.3
DATE: JUL/02/2005
PAGE: 2 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: W.J.ZHU
ERP:1204000241
Super Bright Yellow
APKA2810SYC
SPEC NO: DSAD1130
REV NO: V.3
DATE: JUL/02/2005
PAGE: 3 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: W.J.ZHU
ERP:1204000241
APKA2810SYC
Recommended Soldering Pattern
(Units : mm)
Tape Specifications
(Units : mm)
SPEC NO: DSAD1130
REV NO: V.3
DATE: JUL/02/2005
PAGE: 4 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: W.J.ZHU
ERP:1204000241
PACKING & LABEL SPECIFICATIONS
APKA2810SYC
Remarks:
If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
SPEC NO: DSAD1130
REV NO: V.3
DATE: JUL/02/2005
PAGE: 5 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: W.J.ZHU
ERP:1204000241
Similar pages