JDS OAA-18F1003CA Compact,two-stage amplifier with mid-stage access Datasheet

COMMUNICATIONS MODULES & SUBSYSTEMS
Compact, Two-Stage Amplifier with Mid-Stage Access
OA 1000 Amplifier Series
Key Features
• Saturated output power up to 21 dBm
• Mid-stage access
• Cost-effective gain flatness of ±0.75 dB
• Compact size with the option of integrated PIN
receiver/erbium doped fiber amplifier (EDFA)
• Wide dynamic range
Applications
• Long haul and metro networks
• Tunable laser booster
• Full C-band amplification
• Power equalization and flexible
pre-emphasis
• Overcoming channel add/drop losses
• Overcoming dispersion compensating
filter and variable optical attenuator
(VOA) losses
The OA 1000 Amplifier Series provides the highly desired features and
functionality of custom-designed EDFAs in a compact and economical package.
It has been designed to address the new, higher capacity (higher channel count or
40 Gb/s) long haul system designs as well as the low cost metro add/drop
amplification requirements.
The JDSU OA 1000 amplifier features a 25 dB gain and a saturated output power
of 18 dBm. The module, which contains an erbium-doped fiber coil heater, also
provides mid-stage access and 0.75 dB gain flatness.
The flexible OA 1000 platform supports these variations: output power and gain
ranges; mid-stage loss; monitor ports; gain flattening filters; and erbium doped
fiber coil heater. It uses the variations to modify optical functionality to within
specifications, creating a cost effective solution per system requirements.
JDSU has extensive experience with the development of fully functioning EDFAs,
and can design standard, high-performance optical amplifier products that meet
your time-to-market requirements.
NORTH AMERICA : 800 498-JDSU (5378)
WORLDWIDE : +800 5378-JDSU
WEBSITE : www.jdsu.com
OA 1000 AMPLIFIER SERIES
2
OA 1000 Series Amplifier Detail
SC-UPC INPUT
BLUE
SC-UPC INPUT
OPTICAL MONITOR
(OPTIONAL)
BLACK
(Specifications in mm unless otherwise noted.)
SC-UPC OUTPUT
RED
1.0 - 1.2
METERS
SC-UPC OUTPUT
STAGE 1 (OPTIONAL)
ORANGE
8.9
SC-UPC OUTPUT OPTICAL MONITOR (OPTIONAL)
WHITE
17.5
TYP
9
TYP
4.1
65° TYP
17.5
TYP
7 TYP
125
HEAT SINK
MOUNTING SIDE
PC BOARD
MOUNTING SIDE
118.5
93.5
HEAT SINK
ATTACH
PROVISIONS
4X M3 X 0.5
6 mm DP
SC-UPC INPUT
STAGE 2 (OPTIONAL)
GREEN
3.25
3.25
118.50
12
5.4
TYP
36
2
35
1
10
3.25
3.25
100
46.75
1
93.50
PC BOARD ATTACH
PROVISIONS
4X M3 X 0.5
6 mm DP
1 OTHER CONNECTOR OPTIONS AVAILABLE
CENTERED AS SHOWN
Pinout
Pin
Function
Pin
Function
Pin
Function
1
2
3
4
5
6
7
8
9
10
11
12
Heater +
Heater +
MPD 3 MPD 3 +
MPD 2 MPD 2 +
MPD 1 MPD 1 +
TEC B TEC B NC
GND
13
14
15
16
17
18
19
20
21
22
23
24
LD B +
LD B Thermistor B
MON B +
Thermistor B
MON B TEC B +
TEC B +
TEC A TEC A NC
GND
25
26
27
28
29
30
31
32
33
34
35
36
LD A +
LD A Thermistor A
MON A +
Thermistor A
MON A TEC A +
TEC A +
Thermistor
Thermistor
Heater Heater -
OA 1000 AMPLIFIER SERIES
3
Specifications
Parameter
OAA-15U1000Cx
Optical
Signal wavelength
Total input signal power
Total output signal power
Signal gain
Noise figure
Gain flatness
Dimensions (W x H x D)
Operating temperature
1529 to 1562 nm
-7 dBm
18 dBm
25 dB
6.0 dB
0.75 dB
100 x 125 x 12 mm
0 to 70 °C
Ordering Information
For more information on this or other products and their availability, please contact your local JDSU account manager or
JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at
[email protected].
Sample: OAA-18F1001CA
OAA- 1 8
Code
18
Psat1
18 dBm
Code
F
Gain Flatness2
Flattened (with GFF)
F 10
Code
00
01
02
03
C
Mid-Stage Access3 and Optical Port
With mid-stage access, no optical port
With mid-stage access, 1 optical port
With mid-stage access, 2 optical ports
With mid-stage access, 3 optical ports
1.
2.
3.
4.
Code
3
5
9
A
C
E
Connector Type4
FC/APC
SC/APC
FC/UPC
SC/UPC (default)
MU
E2000
Other powers available upon request.
Non-gain flattened version available upon request.
Version without mid-stage access available upon request.
More connector options are available upon request.
OA 1000 AMPLIFIER SERIES
4
User Safety
The invisible laser light emitted from this
module is harmful to the human eye.
Proper laser safety eyewear must be worn
during operation.
ESD Protection
The laser diodes and photodiodes contained
in this module are very reliable under
normal operating conditions. However, they
are easily destroyed by inadvertent
electrostatic discharge (ESD). Take extreme
precaution to prevent ESD. Use wrist straps,
grounded work surfaces, and antistatic
techniques when operating this module.
When not in use, the fiber amplifier must
be kept in a static-free environment with
the shorting plug covering the connector.
AT T E N T I O N
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
SENSITIVE DEVICES
SMF-28 is a registered trademark of Corning Incorporated.
All statements, technical information and recommendations related to the products herein are based upon information believed to be
reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any
inaccuracies. The user assumes all risks and liability whatsoever in connection with the use of a product or its application. JDSU reserves
the right to change at any time without notice the design, specifications, function, fit or form of its products described herein, including withdrawal at any time of a product offered for sale herein. JDSU makes no representations that the products
herein are free from any intellectual property claims of others. Please contact JDSU for more information. JDSU and the JDSU logo are
trademarks of JDS Uniphase Corporation. Other trademarks are the property of their respective holders. ©2005 JDS Uniphase
Corporation. All rights reserved. 10135546 Rev. 002 11/05 OA1000.DS.CMS.AE
NORTH AMERICA : 800 498-JDSU (5378)
WORLDWIDE : +800 5378-JDSU
WEBSITE : www.jdsu.com
Similar pages