Connor-Winfield FPLA544-155.52M Surface mount 3.3v lvpecl clock Datasheet

THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE.
AURORA, IL 60505.
FAX (630) 581-5040.
PHONE (630) 851-4722.
www.conwin.com
PRODUCT
D ATA
SHEET
CW 0107
FPLA544
155.52M
CRYSTAL CONTROLLED OSCILLATORS
SURFACE MOUNT 3.3V LVPECL CLOCK
FPLA544
ABSOLUTE MAXIMUM RATINGS
PARAMETER
TABLE 1.0
UNITS
Storage Temperature
Supply Voltage
(Vcc)
MINIMUM
NOMINAL
MAXIMUM
UNITS
-40
-
85
°C
-0.5
-
7.0
Vdc
MINIMUM
NOMINAL
MAXIMUM
UNITS
NOTE
44.736
-20
0
-
MHz
ppm
°C
1
-
200
20
70
Vdc
OPERATING SPECIFICATIONS
NOTE
DESCRIPTION
TABLE 2.0
PARAMETER
Center Frequency
Total Frequency Tolerance
Operating Temperature Range
(Fo)
Supply Voltage
(Vcc)
3.135
3.3
3.465
Supply Current
(Icc)
-
-
60
mA
Jitter (BW=10Hz to 20MHz)
-
-
5
pS RMS
Jitter (BW=12kHz to 20MHz)
-
-
1
pS RMS
NOMINAL
MAXIMUM
-
UNITS
NOTE
Vdc
2
1.68
Vdc
2
MAXIMUM
50
1.68
55
1
UNITS
Ohms
Vdc
Vdc
%
nS
INPUT CHARACTERISTICS
TABLE 3.0
PARAMETER
Disable Input Voltage (High)
(Vih)
MINIMUM
2.275
Enable Input Voltage (Low)
(Vil)
-
-
(Voh)
(Vol)
MINIMUM
2.275
45
-
NOMINAL
50
-
PECL OUTPUT
CHARACTERISTICS
TABLE 4.0
PARAMETER
LOAD
Voltage
(High)
(Low)
Duty Cycle
Rise / Fall Time 20% to 80%
NOTE
3
The Connor-Winfield
FPLA544 is a fixed frequency,
surface mount Crystal
Controlled Oscillator (XO)
designed for applications
requiring low jitter and a
±20ppm overall stability.
Operating at 3.3V supply
voltage, the FPLA544
provides LVPECL Differential
Outputs with enable/disable
function.
FEATURES
3.3V OPERATION
ENABLE/DISABLE
4
LVPECL DIFFERENTIAL OUTPUTS
LOW JITTER <1pS RMS
PACKAGE CHARACTERISTICS
Package
TABLE 5.0
Non-hermetic package consisting of an FR4 subs trate with grounded metal
cover.
OVERALL FREQUENCY TOLERANCE
±20PPM
SURFACE MOUNT PACKAGE
PROCESS
RECOMMENDATIONS
Solder Reflow
Wash
TAPE AND REEL PACKAGING
TABLE 6.0
The component solder used internal to this device has a melting point of
221°C. The peak temperature inside the device should be less than or equal
to 220°C for a maximum of 10 seconds
Ultrasonic cleaning is not recommended.
Notes
1) Includes initial tolerance, deviation over temperat ure, supply and load variations, shock, vibration and 10 years
aging.
2) When the oscillator is disabled, t he true output is in a low state (Vol) and the complementary output is in the high
state (VoH).
3) Output must be terminated into 50 ohms to Vcc – 2V or Thevenin equivalent.
4) Duty Cycle measured at 1.977V
ORDERING INFORMATION
FPLA544 - 155.52MHz
CLOCK
SERIES
CENTER
FREQUENCY
Specifications subject to change without notice.
DATA SHEET #:
Ec140
PAGE 1
OF
2
REV: 01
DATE:
7/24/03
aCopyright 2001 Connor-Winfield all rights reserved.
THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE.
AURORA, IL 60505.
FAX (630) 581-5040.
PHONE (630) 851-4722.
www.conwin.com
PRODUCT
D ATA
SHEET
CRYSTAL CONTROLLED OSCILLATORS
PIN
CW DATE CODE
FPLA544
155.52M
1
2
3
4
5
6
7
8
9
10
CONNECTION
N/C
ENABLE/DISABLE
N/C
GROUND
N/C
Q OUTPUT
Q OUTPUT
N/C
Vcc
N/C
SUGGESTED PAD LAYOUT
OUTPUT WAVEFORM
“1” LEVEL
“0” LEVEL
ENABLE/
DISABLE
Specifications subject to change without notice.
DATA SHEET #:
Ec140
PAGE 2
OF
2
REV: 01
DATE:
7/24/03
aCopyright 2001 Connor-Winfield all rights reserved.
Similar pages