Bel MAP40-1005G Metric and sae mounting insert Datasheet

Bel Power Solutions MAP55 Series of power supplies provides
reliable, tightly-regulated DC power for commercial and industrial
systems. Wide-range AC input and full international safety, EMI, and
ESD compliance ensure worldwide acceptance. All units bear the CE
Mark.
The MAP55 utilizes a thermally efficient U-channel chassis design.
Other mechanical design innovations include metric and SAE
mounting inserts on each mounting surface to provide integration
flexibility. Dual-mode connectors provide traditional terminal block
connections or popular single row Molex connector mating.
Single-output models feature wide-range output adjustability to meet
a wide variety of standard and user-specific output voltage
requirements.

RoHS Compliant

Wide Range Input for 110/220 VAC Applications

Meets EN55022, Conducted Class B Limits

Compact Footprint: 6.0 x 3.27 x 1.6 inch (152.4 x 83.1 x 40.6 mm)

Greater than 225000 Hours MTBF

Metric and SAE Mounting Inserts
MAP55 Series
2
MODEL8
OUTPUT
VOLTAGE
ADJUSTMENT
RANGE
MAX
OUTPUT
CURRENT
PEAK
OUTPUT
CURRENT1
LINE
REGULATION
LOAD
REGULATION
RIPPLE
&
NOISE2
INITIAL SETTING
ACCURACY
MAP40-1005G
5V
4.7V to 5.5V
8A
11A
0.2%
±1.5%
1%
5.0V to 5.2V
MAP55-1012G6
12V/15V
11.4V to 15.75V
5.0/4.0A3
5.8/4.7A3
0.2%
±1%
1%
12.0V to 12.2V
MAP55-1024G6
24V/28V
23.5V to 28.5V
2.5/2.2A3
2.9/2.5A3
0.2%
1%
1%
23.8V to 24.2V
MODEL8
OUTPUT
VOLTAGE
ADJUSTMENT
RANGE
OUTPUT
CURRENT
PEAK
OUTPUT
CURRENT4
LINE
REGULATION
LOAD
REGULATION
RIPPLE
&
NOISE2
INITIAL SETTING
ACCURACY
MAP55-4000G7
MAP55-4001G7
MAP55-4002G7
MAP55-4003G7
MAP55-4004G7
+5V
4.7V to 5.6V
6A
8A
0.2%
2%
1%
5.0V to 5.2V
+12V
Fixed
3A
5A
0.2%
2%
1%
11.6V to 12.4V
-5V
Fixed
0.5A
1A5
0.5%
2%
1%
-4.8V to -5.2V
-12V
Fixed
0.5A
1A5
0.5%
2%
1%
-11.6V to -12.4V
+5V
4.7V to 5.6V
6A
8A
0.2%
2%
1%
5.0V to 5.2V
+24V
Fixed
1.5A
2.5A
0.2%
2%
1%
23.0V to 24.9V
-12V
Fixed
0.5A
1A5
0.5%
2%
1%
-11.6V to -12.4V
+12V
Fixed
0.5A
1A5
0.5%
2%
1%
11.6V to 12.4V
+5V
4.7V to 5.6V
6A
8A
0.2%
2%
1%
5.0V to 5.2V
+12V
Fixed
3A
5A
0.2%
2%
1%
11.6V to 12.4V
-12V
Fixed
0.5A
1A5
0.5%
2%
1%
-11.6V to -12.4V
5
+12V
Fixed
0.5A
1A
0.5%
2%
1%
11.6V to 12.4V
+5V
4.7V to 5.6V
6A
8A
0.2%
2%
1%
5.0V to 5.2V
+15V
Fixed
2.5A
3.5A
0.2%
2%
1%
14.6V to 15.4V
-5V
Fixed
0.5A
1A5
0.5%
2%
1%
-4.8V to -5.2V
5
-15V
Fixed
0.5A
1A
0.5%
2%
1%
-14.4V to -15.6V
+5V
4.7V to 5.6V
6A
8A
0.2%
2%
1%
5.0V to 5.2V
+24V
Fixed
1.5A
2.5A
0.2%
2%
1%
23.0V to 24.9V
-15V
Fixed
0.5A
1A5
0.5%
2%
1%
-14.5V to -15.5V
+15V
Fixed
0.5A
1A5
0.5%
2%
1%
14.5V to 15.5V
1 Peak
load for 60 seconds or less are acceptable, 10% duty cycle, maximum.
peak to peak noise expressed as a percentage of output voltage, 20 MHz bandwidth.
3 MAP55-1012 output currents are expressed as 12V/15V operation. MAP55-1024 output currents are expressed as 24V/28V operation.
4 Peak loads up to 65 watts for 60 seconds or less are acceptable, (10% duty cycle max.). Peak power must not exceed 65 watts.
5 Maximum load on V3 or V4 could be 1 amp continuous if output V4 or V3 is unloaded.
6 Maximum 60 W with 150LFM (Linear Feet per Minute) air cooling or maximum 50 W with convection cooling.
7 Maximum 55 W with 200LFM (Linear Feet per Minute) air cooling or maximum total output power 45 W at 40°C ambient operating temperature
for models with no cover and 40 W for models with cover / convection cooling.
8 Non-G models use lead solder exemption.
2 Maximum
[email protected]
MAP55 Series
PARAMETER
3
CONDITIONS / DESCRIPTION
MIN
NOM
MAX
UNITS
132
264
VAC
63
Input Voltage - AC
Continuous input range
90
175
Input Frequency
AC input
47
Brown Out Protection
Lowest AC input voltage that regulation is maintained with full rated
loads
90
VAC
Hold-up Time
Nominal AC Input Voltage (115VAC), full rated load
20
ms
Input Current
90 VAC (55 W load)
Input Protection
Non-user serviceable internally located AC input line fuse.
Inrush Surge Current
Internally limited by thermistor, Vin = 264 VAC (one cycle), 25°C
Operating Frequency
Switching frequency of power supply (varies with load)
PARAMETER
CONDITIONS / DESCRIPTION
MIN
Full load @ 115 VAC. Varies with distribution of loads among
outputs.
MAP55-1012
MAP55-1024
MAP40-1005 and all multiple output models, main channel only
0.21
0.11
0.50
Efficiency
Minimum Loads
1.6
22
NOM
Hz
ARMS
38
APK
180
kHz
MAX
UNITS
73% typical
Amps
Ripple and Noise
Full load, 20 MHz bandwidth.
Output Power
Continuous output power, all multiple output models.
Peak output power (60 s maximum, 10% duty cycle), all multiple
output models.
55
65
Watts
Overshoot / Undershoot
Output voltage overshoot/undershoot at turn-on, V1, V2.
1
%
Regulation
Transient Response
See Model Selection Chart
Varies by output. Total regulation includes: line changes from 90132 VAC or 175-264 VAC, changes in load starting at 20% load and
changing to 100% load.
Recovery time, to within 1% of initial set point due to a 50-100%
load change, 4% max. deviation. (Main output of multiple output
units.)
Turn-on Delay
Time required for initial output voltage stabilization.
Turn-on Rise Time
Time required for output voltage to rise from 10% to 90%. (Nominal
rise time for MAP55-1024 is 36 msec.)
PARAMETER
Overvoltage Protection
Overload Protection
CONDITIONS / DESCRIPTION
See Model Selection Chart
1
μs
4
Sec
7
MIN
MAP40-1005
MAP55-1012
MAP55-1024
Main output only of multiple output units.
Fully protected against output overload and short circuit.
Automatic recovery upon removal of overload condition.
500
NOM
5.5
17.5
32.0
5.6
ms
MAX
UNITS
6.8
19.7
36.0
6.8
V
Europe, Middle East
+353 61 225 977
North America
+1 408 785 5200
© 2016 Bel Power Solutions & Protection
BCD.00564_AD
Asia-Pacific
+86 755 298 85888
MAP55 Series
4
PARAMETER
Agency Approvals
Dielectric Withstand Voltage
Electromagnetic Interference,
Conducted
CONDITIONS / DESCRIPTION
MIN
Approved to the latest edition of the following standards;
UL/CSA60950-1 2nd, IEC60950-1 2nd and EN60950-1 2nd.
Input to Chassis
Input to Output (tested by manufacturer only)
FCC CFR title 47 Part 15 Sub-Part B - conducted & radiated.
EN55022 / CISPR 22 conducted.
EN55022 / CISPR 22 radiated.
2121
4242
B
B
A
Insulation Resistance
Input to output
Leakage Current
Per EN60950, 264 VAC
PARAMETER
CONDITIONS / DESCRIPTION
Altitude
Operating Temperature
Operating
Non-operating
Derate linearly above 50°C by 2.5% per °C to a
maximum temperature of 70°C (with 200LFM)
NOM
MAX
VDC
Class
MΩ
7
MIN
At 100% load:
At 50% load:
Storage Temperature
UNITS
NOM
500
μA
MAX
UNITS
0
0
10k
40k
50
70
-40
85
°C
±0.03
%/°C
95
%RH
°C
Temperature Coefficient
0°C to 70°C (after 15 minute warm-up)
Relative Humidity
Non-condensing
Shock
Operating, peak acceleration
20
G
Vibration
Random vibration, 10Hz to 2kHz, 3 axis
6
GRMS
PARAMETER
CONDITIONS / DESCRIPTION
MAX
UNITS
Dimensions
Weight
Cover (Option)
±0.02
Feet
5
MIN
NOM
152.4 x 83.1 x 40.6
6.00 x 3.27x 1.6
0.55
1.1
mm
in
kg
lb
152.4 x 83.1 x 45.0
6.00 x 3.27 x 1.77
mm
in
Order the cover number 412-59584-G separately.
For convection cooled applications, derate output power to 40 watts
on multiple output units, 50 watts on MAP55-1012 and MAP55-1024
and 40 watts on MAP40-1005.
Dimensions:
CONNECTOR
CONDITIONS / DESCRIPTION
Input & Output Connectors
6-32 screw wire clamps on 0.312" (7.9 mm) centers
0.045" (1.1 mm) square pins on 0.156" (3.4 mm) centers
Matting Connectors
Molex Series 2139, 6442, or 41695
Chassis
0.090" (2.3 mm) aluminum alloy, with clear finish
[email protected]
MAP55 Series
5
Figure 1. Mechanical Drawing
NUCLEAR AND MEDICAL APPLICATIONS - Products are not designed or intended for use as critical components in life support systems,
equipment used in hazardous environments, or nuclear control systems.
TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending on
the date manufactured. Specifications are subject to change without notice.
Europe, Middle East
+353 61 225 977
North America
+1 408 785 5200
© 2016 Bel Power Solutions & Protection
BCD.00564_AD
Asia-Pacific
+86 755 298 85888
Similar pages