ZETTLER AZ9481-1A-24D 16 amp low profile power relay Datasheet

AZ9481
16 AMP LOW PROFILE
POWER RELAY
FEATURES
•
•
•
•
•
•
•
•
•
High power switching (4000 VA)
High sensitivity, 128 mW / 256 mW pickup
Low profile (less than 11.4 mm height)
SPST (1 Form A) and SPDT (1 Form C)
UL Class F (155°C) standard
Epoxy sealed version available
DC coils up to 48 VDC
UL file E43203
TÜV certificate 50155384
CONTACTS
Arrangement
SPST (1 Form A)
SPDT (1 Form C)
Ratings
Resistive load:
Standard
1 Form A
1 Form C
Heavy Duty
1 Form A
Max. switched power:
Max. switched current:
Max. switched voltage:
300 W or 2500 VA
10 A
30 VDC* or 250 VAC
Max. switched power:
Max. switched current:
Max. switched voltage:
300 W or 2500 VA
10 A
30 VDC* or 250 VAC
Max. switched power:
Max. switched current:
Max. switched voltage:
300 W or 4000 VA
16 A
30 VDC* or 250 VAC
* Note:
Rated Load
UL
If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
Standard, 1 Form A
10 A at 250 VAC, resistive, 100k cycles [1][2]
10 A at 30 VDC, resistive, 100k cycles [1][2]
TV-5 [1]
Standard, 1 Form C
10 A at 250 VAC, resistive, 100k cycles (N.O.) [2]
10 A at 250 VAC, resistive, 30k cycles (N.O.) [3]
6 A at 250 VAC, resistive, 100k cycles (N.C.) [2][3]
Heavy Duty, 1 Form A
16 A at 125 VAC, resistive, 100K cycles [1][2]
10 A at 250 VAC, resistive, 100K cycles [1][2]
10 A at 30 VDC, resistive, 100k cycles [1][2]
0.3 A at 110 VDC, resistive, 50k cycles [1][2]
TV-5 [1]
TÜV
Heavy Duty, 1 Form A
16 A at 250 VAC, resistive, 50k cycles [1][2]
8 A at 250 VAC, cos phi 0.4, 50k cycles [1][2]
10 A at 30 VDC, resistive, 50k cycles [1][2]
Material
Silver cadmium oxide [1], silver tin oxide [2],
silver nickel [3], gold plating available
Resistance
< 100 milliohms initially
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 107
1 x 105 at 10 A 250 VAC Res.
Operate Time (typical)
10 ms at nominal coil voltage
Release Time (typical)
5 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
(at sea level for 1 min.)
2500 Vrms coil to contact
1000 Vrms between open contacts
Insulation
Resistance
100 megaohms at 20°C, 500 VDC,
50% RH
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature
Operating
At nominal coil voltage
1 Form A: -40°C (-40°F) to 85°C (185°F)
1 Form C: -40°C (-40°F) to 70°C (158°F)
Vibration
0.062” (1.5 mm) DA at 10-55 Hz
Shock
10 g
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P.C.
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp.
80°C (176°F)
Max. Immersion Time
30 seconds
Weight
8 grams
COIL
Power
At Pickup Voltage 128 mW (1 Form A)
(typical)
256 mW (1 Form C)
Max. Continuous
Disspiation
Temperature Rise 13°C (23°F) at nominal coil voltage (1 Form A)
24°C (43°F) at nominal coil voltage (1 Form C)
Temperature
Max. 155°C (333°F)
NOTES
1. All values at 20°C (68°F)
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
1.34 W at 20°C (68°F) ambient
-
A ZETTLER GROUP Company
phone: +49 89 800 97-0 [email protected]
fax:
+49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2014-06-26
AZ9481
RELAY ORDERING DATA
COIL SPECIFICATIONS SPST-NO (1 Form A)
Nominal Coil
VDC
Must Operate
VDC
Max. Continuous
VDC
Coil Resistance
Ohm ± 10%
5
4.0
12.9
125
AZ9481-1A-5D
6
4.8
15.5
180
AZ9481-1A-6D
9
7.2
23.3
405
AZ9481-1A-9D
12
9.6
31.0
720
AZ9481-1A-12D
18
14.4
46.6
1,620
AZ9481-1A-18D
24
19.2
62.0
2,880
AZ9481-1A-24D
48
38.4
124.0
11,520
AZ9481-1A-48D
Coil Resistance
Ohm ± 10%
ORDER NUMBER*
ORDER NUMBER*
* “1A” denote silver cadmium oxide contacts.
Substitute “1AE” in place of “1A” for silver tin oxide contacts.
Add suffix “T” after “1A” or “1AE” for heavy duty version.
Add suffix “E” at the end of order number for sealed version.
Add suffix “A” at the end of order number for gold plated contacts.
COIL SPECIFICATIONS SPDT (1 Form C)
Nominal Coil
VDC
Must Operate
VDC
Max. Continuous
VDC
5
4.0
9.1
6
4.8
9
7.2
12
18
24
48
62.5
AZ9481-1CE-5D
11.0
90
AZ9481-1CE-6D
16.4
202.5
AZ9481-1CE-9D
9.6
21.9
360
AZ9481-1CE-12D
14.4
32.9
810
AZ9481-1CE-18D
19.2
43.9
1,440
AZ9481-1CE-24D
38.4
87.8
5,760
AZ9481-1CE-48D
* “1CE” denote silver tin oxide contacts.
Substitute “1CB” in place of “1CE” for silver nickel contacts.
Add suffix “E” at the end of order number for sealed version.
Add suffix “A” at the end of order number for gold plated contacts.
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
-
A ZETTLER GROUP Company
phone: +49 89 800 97-0 [email protected]
fax:
+49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2014-06-26
AZ9481
MECHANICAL DATA
OUTLINE DIMENSIONS
PC BOARD LAYOUT
Form A
Form C
.886MAX
[22.5]
.649MAX
[16.5]
.886MAX
[22.5]
.449MAX
[11.4]
.016
[0.4]
.649MAX
[16.5]
.449MAX
[11.4]
.016
[0.4]
.700
[17.78]
2-Ø.036
[Ø0.9]
.142
[3.7]
.039
[1.0]
.020
[0.5]
.016
[0.4]
.020
[0.5]
.142
[3.7]
.039
[1.0]
.700
[17.78]
.020
[0.5]
.016
[0.4]
.020
[0.5]
.500
[12.7]
.700
[17.78]
2-Ø.052
[Ø1.3]
.400
[10.2]
FORM A
.500
[12.7]
.500
[12.7]
.400
[10.16]
.300
[7.62]
.400
[10.16]
.700
[17.78]
WIRING DIAGRAM
2
2-Ø.036
[Ø0.9]
1
2
.500
[12.7]
1
.400
[10.2]
3
4
Form A
3
4
5
.300
[7.62]
3-Ø.052
[Ø1.3]
FORM C
Form C
Dimensions in inches with metric equivalents in parentheses.
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
-
A ZETTLER GROUP
Company
phone: +49 89 800 97-0 [email protected]
fax:
+49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2014-06-26
Similar pages